What is the fuel consumption of the 2009 Teana 2.5V6 in liters?

1 Answers
RachelLynn
07/30/25 2:04am
The NEDC combined fuel consumption of the 2009 Teana Duke 2.5V6 is 9.5L per 100km. The Teana Duke is a premium sedan launched by Nissan Motor Co., Ltd. The 2009 Teana Duke 2.5V6 can travel the following distance on a full tank of fuel: with a fuel tank capacity of 70L, the distance it can cover on a full tank is 70/9.5*100=736km. As a classic model, the Teana Duke comes standard with a keyless entry system, one-button start system, cruise control, automatic dual-zone air conditioning, electric leather seats, and an electric sunroof. This car features an automatic headlight cleaning function, and the Duke Teana's headlight assembly uses xenon headlights, which provide significant advantages in lighting. Additionally, the car is equipped with six airbags to ensure driving safety. In terms of power, the car is equipped with a 2.5L-185hp-V6 engine, with a maximum power of 136kw and a maximum torque of 232Nm, paired with a CVT continuously variable transmission. The level of a car's fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when encountering a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Cars with greater weight will have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block temperature is low during cold starts, the injected gasoline is less likely to vaporize, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. At the same time, low temperatures cause the engine computer to control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
Was this review help?
6
1
Share
More Forum Discussions

Why can't the key of Lavida Plus be turned?

The reason why the key of Lavida Plus cannot be turned is that the steering wheel is in a locked state. Introduction to the locked state: The steering wheel lock is a simple anti-theft function. When the car is turned off, turning the steering wheel from the centered position to one direction (usually to the left) by a certain angle will cause the steering wheel to lock with a "click" sound. Solution for the steering wheel lock: In this case, simply insert the key, turn the steering wheel counterclockwise with the left hand, and turn the key with the right hand. At this moment, the lock will be released instantly. For cars with a one-button start, first turn the steering wheel left and right, then press the brake, and finally press the one-button start button to successfully unlock it.
13
2
Share

Are motorcycle and car license plates issued at the same place?

Motorcycle and car license plates are issued at the same place, both at the vehicle management office. Introduction to license plates: License plates, commonly known as vehicle tags, refer to the number plates attached to the front and rear of a vehicle. They are typically made of aluminum, sheet iron, plastic, or paper, and display the vehicle's registration number, registration region, and other relevant information. Functions of license plates: License plates serve as identification and information registration for vehicles. Their main purpose is to indicate the vehicle's region of registration and to allow tracing of the vehicle's owner and registration details based on the license plate.
7
2
Share

Do Small Cars Have Seat Belts in the Back?

Small cars have seat belts in the back. Introduction to Seat Belts: Car seat belts are safety devices designed to restrain occupants during collisions and prevent secondary impacts with the steering wheel, dashboard, etc., or to avoid occupants being thrown out of the vehicle, which could lead to fatalities or injuries. Car seat belts, also known as seat restraints, are a type of occupant restraint system. They are widely recognized as the most cost-effective and efficient safety device, and many countries mandate their installation in vehicles. Functions of Seat Belts: The role of seat belts is to limit movement and provide cushioning, absorbing impact energy and dissipating inertial forces to prevent or reduce the severity of injuries to drivers and passengers. Car accident investigations show that wearing a seat belt can reduce fatalities by 57% in frontal collisions, 44% in side collisions, and 80% in rollovers.
1
0
Share

Is It Safe to Leave a Walkie-Talkie in the Car During Summer?

It is not safe to leave a walkie-talkie in the car during summer. Car Walkie-Talkie: A car walkie-talkie is a communication tool installed in the vehicle. It features selective calling, allowing two individuals to communicate privately by dialing the other party's ID number. The car walkie-talkie has a transmission power of over 25W, with no radiation during calls, ensuring no harm to the human body. Components of a Car Walkie-Talkie: The main components of a car walkie-talkie include: the casing, main unit, battery, belt clip, antenna, headphones, and other accessories. Car walkie-talkies are primarily used in industries such as public security, civil aviation, transportation, water conservancy, railways, manufacturing, construction, and services. They facilitate communication and command coordination among team members, enhancing communication efficiency and the ability to respond quickly to emergencies.
14
3
Share

Why Does a Motorcycle Experience Bearing Failure?

Motorcycle bearing failure occurs due to excessive wear of the piston oil rings leading to engine oil burning; failure of the valve oil seals; and prolonged maintenance intervals. Solutions for Bearing Failure: Ensuring there is sufficient and qualified engine oil is key. Therefore, users only need to regularly change the engine oil, periodically check the oil level, and use original air filters and spark plugs to effectively prevent cylinder scuffing. If you notice your motorcycle is consuming oil, promptly visit a repair shop to diagnose the cause and address the issue early. This way, the motorcycle will be more durable with proper maintenance. Introduction to Motorcycle Bearing Failure: Motorcycle bearing failure refers to damage caused by the lack of engine oil to high-speed rotating components, which can severely harm the engine. The most common cause is insufficient lubrication of the bearings inside the crankshaft due to lack of oil, leading to overheating during high-speed operation and ultimately burning out the bearings without proper lubrication. Bearing failure in motorcycles results in louder engine noise and significant mechanical rattling.
15
2
Share

Do I need to bring my own vehicle for the motorcycle test?

You don't need to bring your own vehicle for the motorcycle test as the driving school provides training motorcycles. Basic motorcycle test items: The basic motorcycle test includes: stake test, slope parking and starting, parallel parking, single-plank bridge crossing, curve driving, right-angle turning, speed-limited passage through narrow gates, continuous obstacle crossing, 100-meter gear shifting, and bumpy road driving. Test precautions: First, be sure to practice all test items several times at the training ground before the test and conduct mock exams. Secondly, pay attention to rest, bring your ID card to the test, and arrive early at the test site to wait. Finally, when you reach the test area, find your assigned test vehicle, make preparations after boarding, adjust the seat and mirrors, fasten your seat belt, and turn on the left turn signal to prepare for starting.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.