What is the fuel consumption of the 2007 Toyota Reiz?

2 Answers
LaRachel
07/29/25 2:53am
Toyota Reiz 2007 old model engine fuel consumption is definitely on the higher side, around 11L. After all, engine technology wasn't as mature back then as it is now. Factors affecting fuel consumption: 1. Driving conditions: This is very easy to understand. No matter where you are, traffic jams happen. Stop-and-go driving, waiting at traffic lights, and driving in the city will result in higher fuel consumption. On the highway, maintaining a steady engine speed without high revs will be more fuel-efficient. 2. Air conditioning: In the hot summer, turning on the cool AC is a great comfort. But it's also a major culprit for high fuel consumption. Driving with the AC at maximum setting consumes 5-25% more fuel than driving with it off. 3. Passenger/cargo weight: Vehicle weight has a significant impact on fuel consumption. With a full load of passengers or cargo, fuel consumption will inevitably increase. Therefore, try to minimize unnecessary items in the car to reduce weight and save fuel. 4. Tires and tire pressure: Different tires have different rolling resistance. Low tire pressure increases the contact area between the tire and the ground, leading to higher rolling resistance. Therefore, maintaining standard tire pressure is more fuel-efficient.
Was this review help?
17
0
Share
CarlosLee
08/12/25 6:47am
Anyone who has driven the old Reiz knows that the V6 engine is indeed not fuel-efficient. Two of my friends with 2007 Reiz models—the 2.5L one averages around 11-13L/100km in city driving, and it can go up to 15L if stuck in frequent stop-and-go traffic. On highways, it can stay around 8-9L. The 3.0L version is even more extreme, easily hitting 14L or more in urban driving with just moderate acceleration. The car was tuned for sportiness back then, and combined with the higher drivetrain losses of rear-wheel drive, it’s certainly not fuel-efficient by today’s standards. My advice: pay attention to driving habits—avoid flooring the throttle, keep tire pressure adequate, clean carbon deposits regularly, and take good care of this aging car.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

How to Downshift a Manual Transmission Car?

Manual transmission car downshifting method is: 1. Pull the gear lever downward from 5th gear to engage 4th gear; 2. Hold the gear lever and push upward to engage 3rd gear; 3. Push downward to engage 2nd gear; 4. Push upward to engage 1st gear. Manual transmission refers to changing the gear meshing position inside the gearbox to alter the transmission ratio, thereby achieving speed change. The method for upshifting a manual transmission is: 1. Push the gear lever inward with your right hand, then push upward to engage 1st gear; 2. Hold the gear lever and pull it downward to engage 2nd gear; 3. Push the gear lever upward with your hand to engage 3rd gear; 4. Lightly hold the gear lever with your palm, pull downward to engage 4th gear; 5. Push the gear lever outward with the back of your hand, then push upward to engage 5th gear to complete the process.
11
5
Share

What's the reason for suddenly being unable to accelerate while driving?

The reasons for suddenly being unable to accelerate while driving are: 1. Oxygen sensor malfunction; 2. Substandard gasoline quality; 3. Intake manifold leakage causing over-lean air-fuel mixture; 4. Low fuel pressure, clogged fuel injector or fuel filter; 5. Abnormal signals from pressure sensor or throttle position sensor; 6. Sensor signal abnormalities causing incorrect ignition timing (late ignition); 7. Weak high-voltage spark due to faulty spark plugs, igniter or high-voltage wires; 8. Dirty throttle body; 9. Malfunctioning exhaust gas recirculation system; 10. Clogged exhaust pipe; 11. Low cylinder compression; 12. Turbocharger system failure.
13
3
Share

How to turn off the rear wiper of the Lynk & Co 01?

The method to turn off the rear wiper of the Lynk & Co 01 is: push the right-hand stalk away from the steering wheel to turn it off. The rear wiper helps reduce the impact of rainy weather on the driver by providing good visibility through the interior rearview mirror. Taking the 2021 Lynk & Co 01 as an example, its body dimensions are: length 4549mm, width 1860mm, height 1689mm, wheelbase 2734mm, minimum ground clearance 213mm, and the body structure is a 5-door, 5-seat SUV. The 2021 Lynk & Co 01 is equipped with a 2.0T turbocharged engine, with a maximum power of 160kW and a maximum torque of 325Nm, paired with an 8-speed automatic transmission.
8
4
Share

What is the reason for the unresponsive accelerator pedal in the Buick Excelle?

The reasons for the unresponsive accelerator pedal in the Buick Excelle are: 1. Transmission valve body failure; 2. Internal friction plate issues in the transmission; 3. Control module failure. The accelerator, also known as the throttle or air valve, refers to the control device that regulates engine power. The Buick Excelle has body dimensions of: length 4468mm, width 1765mm, height 1469mm, with a wheelbase of 2611mm. The 2020 Excelle is equipped with a 1.3L naturally aspirated engine, delivering a maximum power of 79kW and a maximum torque of 133Nm, paired with a 5-speed manual transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of compound torsion beam non-independent suspension.
15
1
Share

Does the Skoda Karoq have four-wheel drive?

The Skoda Karoq does not have four-wheel drive; it is front-engine, front-wheel drive. Front-engine, four-wheel drive refers to the engine being positioned at the front of the vehicle, with power delivered to all four wheels. Taking the 2020 Skoda Kamiq as an example, its body dimensions are: length 4409mm, width 1781mm, height 1606mm, wheelbase 2610mm, fuel tank capacity 52.8mm, and it features a 5-door, 5-seat SUV body structure. The 2020 Skoda Kamiq is equipped with a 1.2T turbocharged engine, delivering a maximum power of 85kW and a maximum torque of 200Nm, paired with a 7-speed dual-clutch transmission.
9
0
Share

How to Fix a Dent in the Car?

The method to fix a dent in the car is: 1. Set the hair dryer to the hot air setting and direct the air outlet at the dented part of the car; 2. Immediately after blowing with the hair dryer, cover the dent with prepared aluminum foil; 3. Place dry ice on the aluminum foil; 4. After a while, if you hear a metallic sound, it indicates that the car dent is returning to its original shape. The methods for car body maintenance are: 1. Promptly remove snow, rainwater, and other mud and dirt from the car surface to keep the body clean and aesthetically pleasing; 2. Waxing the car body can prevent the paint from cracking, corroding, or rusting due to freezing; 3. Regularly inspect the car body surface, and if there is damage, scratches, or exposed areas, promptly perform a paint job; 4. Use specialized detergents and neutral active water to clean the car body; 5. Wipe the car body with a soft cloth or sponge to prevent mixing in metal shavings and sand particles.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.