What is the fuel consumption of the 2007 Buick LaCrosse?

1 Answers
IsabelleFitz
07/25/25 4:56pm
07 Buick LaCrosse has a fuel consumption of 12.5 liters per 100 kilometers. More related information is as follows: 1. Car Introduction: The LaCrosse is a mid-size car under Buick. The 07 Buick LaCrosse has a wheelbase of 2807mm, with length, width, and height being 4998mm, 1851mm, and 1461mm respectively. 2. Engine Introduction: The 2.4-liter naturally aspirated engine of the 07 Buick LaCrosse has a maximum power of 125kw and a maximum torque of 225 Nm. The maximum power speed of this engine is 6400 rpm, and the maximum torque speed is 4800 rpm. This engine is equipped with DVVT technology and multi-point fuel injection technology, and uses an aluminum alloy cylinder head and block. The engine is paired with a 4AT transmission. 3. Car Configuration: The front suspension of the 07 Buick LaCrosse uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension. The MacPherson suspension is the simplest type of independent suspension, with only one L-shaped control arm, which hardly occupies any engine compartment space. The multi-link suspension is also a common type of independent suspension, which is improved based on the double-wishbone suspension. The multi-link suspension replaces the two wishbones of the double-wishbone suspension with separate links.
Was this review help?
6
5
Share
More Forum Discussions

Where is the cigarette lighter fuse located in the Chevrolet Malibu XL?

The cigarette lighter fuse in the Chevrolet Malibu XL is located inside the leftmost cover panel of the vehicle's center console, integrated with other fuses. If you need to replace the cigarette lighter fuse, first open the cover panel, then remove the blown fuse, and install a new fuse of the same specification and model. Below is more information about fuses: 1. The main function of a fuse is to ensure the safe use of the battery. The battery is connected to electrical appliances through wires and fuses. If there is a fault in the internal circuit of an electrical appliance and there is no fuse, it may damage the battery. 2. With a fuse in place, if a short circuit occurs, the fuse will melt first, actively disconnecting the electrical appliance from the battery, thus ensuring the battery's safety. 3. If the owner finds that the fuse has melted, they should first check for faults in the electrical appliance before replacing the fuse. When replacing, always use a fuse of the same specification and model, and never substitute it with other metal wires.
13
2
Share

How to enable automatic locking for Hyundai Elantra?

Hyundai Elantra does not come with an automatic locking feature by default, but it can be retrofitted. Below is an analysis of the pros and cons of automatic locking: 1. Advantages: It provides protection for passengers with children in the car, preventing young children from opening the door handles while the vehicle is in motion. 2. Disadvantages: (1) It may foster laziness in drivers and reduce their vigilance. (2) It can hinder escape. The central locking system is a combination of mechanical and electronic devices. In the event of an accident where electronic devices fail, passengers can still open the door locks to escape. However, if all occupants inside the car are unconscious, rescuers outside may waste more time trying to open the doors.
14
0
Share

Which country does Dongfeng Yueda Kia belong to?

Dongfeng Yueda Kia is a joint venture brand between China and South Korea. The models under Dongfeng Yueda Kia include: K4, K5 K5, Forte, Kia K3, Sportage, etc. Here is an introduction to the new cars of Dongfeng Yueda Kia: 1. Taking the 2019 Dongfeng Yueda Kia K4 as an example, it belongs to the mid-size car category, with body dimensions of: length 4720mm, width 1815mm, height 1465mm, wheelbase of 2770mm, fuel tank capacity of 62l, and curb weight of 1380kg. 2. The 2019 Dongfeng Yueda Kia K4 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.8L naturally aspirated engine, delivering a maximum horsepower of 143PS, maximum power of 105kW, maximum torque of 17Nm, and is paired with a 6-speed automatic transmission.
20
2
Share

Does the Buick GL6 have a four-cylinder engine?

Buick GL6 does not have a four-cylinder engine. Here is more information about this vehicle: 1. The Buick GL6 is an MPV model under the Buick brand, and it is equipped with a three-cylinder engine across all variants. The dimensions of the Buick GL6 are 4692 mm in length, 1794 mm in width, and 1626 mm in height, with a wheelbase of 2796 mm. 2. The Buick GL6 is powered by a 1.3-liter turbocharged three-cylinder engine, delivering a maximum power of 120 kW and a maximum torque of 230 Nm. This engine features multi-point fuel injection technology and is constructed with an aluminum alloy cylinder head and block. It is paired with a 6-speed automatic transmission. 3. The front suspension of the Buick GL6 uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
15
5
Share

Where is the fuel tank switch located on the Qoros 5?

The Qoros 5 does not have a separate fuel tank switch. When the central locking system is unlocked, simply press the fuel tank cover to open it. Below is more information about the car's fuel tank: 1. The fuel tank is a container used in vehicles such as cars or airplanes to store fuel, and it is a specialized container in the hydraulic system for storing hydraulic oil. 2. In addition to storing gasoline, the fuel tank can also dissipate heat and separate air bubbles from the oil. It can be divided into two types: open fuel tanks and closed fuel tanks. Extended content: The Qoros 5 is a compact SUV with dimensions of 4600mm in length, 1869mm in width, and 1676mm in height, and a wheelbase of 2710mm. This model is equipped with a 1.6-liter turbocharged engine across the entire lineup, delivering a maximum power of 115kw and a maximum torque of 210nm.
1
0
Share

How to set the automatic locking for Ford Kuga?

Ford Kuga automatic locking setup method: You need to shift into P gear, turn the key to the ON position, ensure all four doors are closed, then press and hold the lock button until the indicator light on the dashboard flashes twice. The purpose of the automatic locking function is anti-theft, allowing the doors to lock quickly after driving to prevent door-pull robberies during traffic jams or at red lights, providing a certain level of security. Below is more information about this vehicle: 1. The Ford Kuga is an SUV under the Ford brand, with body dimensions of 4524mm in length, 1838mm in width, and 1701mm in height. 2. The Ford Kuga is equipped with a new internet car intelligent system developed based on AliOS, which better suits the usage habits of Chinese consumers and enhances the scope and capability of the in-car system. Thanks to the cloud-based voice self-learning system, both the driver and front passenger can directly control multiple functions inside the vehicle using natural voice commands without the need to memorize rigid control commands.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.