What is the fuel consumption of the 2.0L Nissan Qashqai?

2 Answers
LaZane
07/29/25 8:07am
The 2.0L engine model of the Nissan Qashqai generally has a comprehensive fuel consumption of around 9-10 liters per 100 kilometers. Here is extended information about the fuel consumption of the 2.0L Qashqai: 1. The average fuel consumption of the 2.0L 6-speed manual transmission engine is around 8.58L, while the 2.0L CVT 6-speed engine averages about 9.73L, and the 2.0L CVT 7-speed engine averages approximately 8.51L. 2. The fuel consumption of the 2.0L Qashqai is relatively high. Frequent hard acceleration, sudden braking, and other aggressive driving behaviors can significantly increase fuel consumption. Additionally, it is important to regularly clean engine carbon deposits and check whether the spark plugs are functioning properly to avoid excessive vehicle fuel consumption.
Was this review help?
17
4
Share
DeJaxon
08/12/25 11:20am
As a Nissan Qashqai 2.0 owner for half a year, my average fuel consumption is around 8.5 liters per 100 kilometers. In city traffic jams, it may exceed 9 liters, while on highways it's more fuel-efficient, staying around 7 liters. During daily commuting, I've noticed that gentle driving—such as avoiding sudden acceleration and hard braking—can save a lot of fuel. Regular maintenance is also crucial; changing the engine oil every 5,000 kilometers and cleaning the air filter helps stabilize fuel consumption at 8 liters. Once, when the tire pressure was too low, fuel consumption suddenly spiked to 10 liters, but the issue was quickly resolved by inflating the tires. The Qashqai has moderate fuel consumption among SUVs. With good driving habits and proper vehicle maintenance, the costs remain manageable, making it suitable for city workers like me.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

Where is the fuel tank cap switch located on a Citroën?

The fuel tank cap switch for Dongfeng Citroën is located below the left side of the driver's seat. There are three key points to note regarding fuel tank installation: 1. Storage location: The fuel tank must be stored in a safe location to prevent fires. The tank or fuel container should be placed separately in a visible area, at a safe distance from the diesel generator set, and smoking is strictly prohibited. 2. After placement: The highest fuel level should not exceed 2.5 meters above the base of the diesel generator set. If the fuel level in a large fuel storage exceeds 2.5 meters, a daily-use fuel tank should be installed between the large storage and the diesel generator set to ensure the direct fuel supply pressure does not exceed 2.5 meters. Even when the diesel generator set is turned off, fuel must not flow into the diesel engine through the fuel inlet or injection lines by gravity. 3. Resistance requirements: The resistance at the fuel port must not exceed the specified value for all diesel generators. This resistance value is based on the fuel tank being half full.
12
5
Share

Do brake pads and brake discs need to be replaced together?

Brake discs and brake pads do not necessarily need to be replaced together, as it depends on the specific situation, since brake pads wear out more frequently than brake discs. Below is relevant information about brake discs and brake pads: 1. Situation Analysis: Brake pads must be replaced when they wear down to a certain limit (usually when 2-3mm remains). When replacing brake pads, it is not always necessary to replace the brake discs. Whether the brake discs need to be replaced depends on the situation, such as if the wear on the brake discs exceeds 2mm (some models specify that wear exceeding 1mm requires replacement). Of course, there are also cases of abnormal wear where both the brake pads or brake discs must be replaced. 2. When replacing the brake pads, special tools must be used to retract the brake caliper pistons: Other pry bars should not be used to force them back, as this can easily bend the guide screws of the brake caliper, causing the brake pads to seize. After replacing the brake pads, a running-in period of 200 kilometers is required to achieve optimal braking performance. Drive cautiously with newly replaced brake pads.
11
4
Share

How to Start a Porsche by Inserting the Key?

To start a Porsche, simply insert the key into the keyhole on the left side and then press the start button to ignite the engine. The Porsche key does not require turning. More details about Porsche are as follows: 1. All Porsche models have the keyhole located on the left side. 2. Porsche is a high-performance car manufacturer from Germany, and its models are known for excellent performance and power. 3. The Porsche 911 series has a large fan base worldwide, thanks to its outstanding handling. All 911 models are equipped with a horizontally opposed engine, which has a very low center of gravity. This type of engine can be understood as a V-type engine with a 180-degree angle. 4. Other Porsche models do not use horizontally opposed engines. Porsche also offers luxury SUVs and four-door luxury sedans.
19
5
Share

Does the activated carbon cabin air filter have a front and back side?

The front and back sides of the activated carbon cabin air filter are determined by the blower. The filter is installed inside the glove compartment. Turn on the air conditioning to test whether the blower's airflow is directed upward or downward: if the airflow is upward, the black activated carbon side should face downward; if the airflow is downward, the black activated carbon side should face upward. The black side is the intake side, while the white HEPA cotton side is the outlet side. Here is additional information: Activated carbon: The activated carbon cabin air filter features an additional layer of high-efficiency bamboo charcoal on top of the high-efficiency filter paper, achieving complete PM2.5 filtration, which non-activated carbon filters cannot match. In environments with high dust or smog, activated carbon filters are preferred. Non-activated carbon cabin air filters, on the other hand, only consist of a single layer of high-efficiency filter paper. In smaller cities with less dust or smog, non-activated carbon filters can be prioritized.
5
5
Share

The Difference Between BMW and BMW Brilliance?

Here is the relevant introduction to the differences between BMW Brilliance and BMW: 1. Different brand attributes: BMW Brilliance is a joint venture brand, while BMW is the original product brand. BMW: All parts and body are original assembly, and the car is imported; BMW Brilliance: Original parts are shipped to China and assembled domestically into complete vehicles. 2. From the perspective of vehicle parts procurement sources: Both BMW Brilliance and BMW use globally imported parts. BMW Brilliance also uses imported parts, with production origins including Germany, the Czech Republic, Poland, and even China. BMW factories worldwide have unified standards and requirements for imported parts, and local suppliers of BMW Brilliance are also controlled by BMW Group's procurement strategy. 3. Engine: Some parts of BMW Brilliance's engines, such as cylinder blocks and cylinder heads, are imported from Germany, while others like crankshafts and camshafts are processed or procured domestically. Some engine series are imported as complete units. As for core components like axles and transmissions, the localization rate of parts is relatively low. BMW Brilliance's Tiexi factory has a ZF assembly workshop, following BMW's plant construction model.
12
3
Share

What are the common causes of car spontaneous combustion?

Car spontaneous combustion can be caused by electrical leakage, grounding issues, fuel leakage, electrical component failure, and short circuits. Below is a partial introduction to the causes of car spontaneous combustion: 1. Electrical Leakage: When the engine is running, the high temperature of the ignition coil can soften, age, or crack the insulation layer of the high-voltage ignition wires, making it easier for the high-voltage electricity to penetrate the insulation. This results in electrical leakage, causing the temperature at the leakage point to continuously rise and ignite leaked gasoline from the engine or carburetor, ultimately leading to a fire. 2. Grounding Issues: Among self-ignition accidents caused by circuit failures, grounding issues are the most common cause. Many new car owners, eager to protect their vehicles, install anti-theft devices, upgrade audio systems, or modify the car's appearance. These actions can lead to improper grounding of wires, potentially causing the vehicle to catch fire. 3. Fuel Leakage: Leaked gasoline is a highly dangerous flammable substance. 4. Electrical Component Failure and Short Circuits: Common issues include the starter switch contacts welding together due to overheating, preventing the starter solenoid from disengaging. This leads to prolonged starting times (the safe starting time for a starter is 5 seconds), causing the starter to overheat and catch fire.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.