What is the fuel consumption of the 19th generation Sylphy Classic?

2 Answers
Bill
09/01/25 3:41am
The fuel consumption of the 2019 Sylphy Classic is 6.6L/km. Here is more information about the 2019 Sylphy Classic: 1. The 2019 Sylphy Classic adopts the classic combination of a 1.6L naturally aspirated engine and a CVT continuously variable transmission, with a maximum power of 93KW/5600rpm and a maximum torque of 154N·m/4000rpm. The 1.8L naturally aspirated engine has a maximum power of 102KW/6000rpm and a maximum torque of 174N·m/3600rpm, also paired with a CVT continuously variable transmission. 2. The engine hood of the 2019 Sylphy Classic features lines extending from both sides towards the center, giving the overall design a sense of power.
Was this review help?
6
0
Share
LouisLynn
09/13/25 6:33am
I've been driving a 2019 Nissan Sylphy Classic for almost three years now, with an average fuel consumption of 7 liters per 100 kilometers for daily urban commuting, dropping to around 5 liters on long highway trips. The biggest factor affecting fuel efficiency is driving style—like my habit of easing off the accelerator early and avoiding sudden braking, which saves a lot on fuel costs. Road conditions also matter; for example, fuel consumption can rise to 8 liters in traffic jams, so I try to avoid peak hours. Don’t overlook maintenance details: changing the engine oil and air filter every 5,000 kilometers and keeping tire pressure between 2.2-2.5 Bar helps stabilize fuel consumption at just over 6 liters. Cold starts in winter consume more fuel, but a one- to two-minute warm-up is sufficient. Overall, this car is quite economical—a full tank can cover over 600 kilometers, making it much easier to maintain, especially suitable for the average commuter.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

What are the reasons for the car not moving in reverse?

The reasons for the car not moving in reverse are as follows: 1. If the car does not move when in gear, it is a functional comprehensive fault involving the clutch, transmission, and drive axle. When diagnosing, the fault location should be determined first. You can start by checking the condition of the two wheels. Lift the rear axle and rotate one rear wheel. If the other rear wheel rotates in the opposite direction but the drive shaft does not follow, it indicates that all the rivets of the driven bevel gear are sheared off. If the other rear wheel does not rotate, the half shaft should be disassembled and inspected for breakage. 2. If the car does not move when starting in gear and the drive shaft does not rotate, the fault lies in the transmission. Remove the transmission cover and inspect whether the transmission shift fork is broken or whether the guide block fixing screws are loose. 3. If the drive shaft does not rotate in any gear position, the fault lies in the clutch. Check whether the clutch is severely slipping, whether all the rivets of the driven disc spline hub and steel plate are sheared off, or whether the steel plate is fractured.
1
2
Share

Are Red Light Running Photos Manually Selected?

Red light violation evidence photos are manually screened. Criteria for determining red light running: The electronic eye captures three photos as the basis for determining a red light violation, which are the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are present will it be considered a red light violation. Penalty points for red light running: According to Article 2, Section 1, Clause 2 of the 'Scoring Standards for Road Traffic Safety Violations', driving a motor vehicle in violation of traffic signal lights will result in 6 penalty points. Article 3, Section 1, Clause 8 states that driving a motor vehicle in violation of prohibition signs or markings will result in 3 penalty points. Common ways to check for red light violations include the following: You can check for red light violations through the 'Traffic Management 12123' app. After opening it, log in with your ID card, find the 'Violation Handling' option and click on it. In the violation handling section, you can see the current status of your vehicle. If there is a violation, the specific details will be displayed. Visit the service halls of traffic branches in various cities and counties to check through touch query terminals. Log in to the external service websites of the Public Security Traffic Management Bureau of each city: Find the 'Vehicle Violation Query', enter your license plate number and vehicle engine number, and click 'Query'.
1
3
Share

What is the difference between Rear Cross Traffic Alert and parking radar?

The differences between Rear Cross Traffic Alert (RCTA) and parking radar are as follows:1. Different functions: RCTA, short for Rear Cross Traffic Alert, is a system designed to detect approaching vehicles from the sides when reversing. It warns the driver of potential cross-traffic from behind. On the other hand, parking radar is used to detect obstacles and their distance directly behind the vehicle during reversing, making parking easier and safer.2. Different sensors and installation positions: Generally, RCTA uses millimeter-wave radar sensors, which are installed inside the rear bumper's crash beams on both sides of the vehicle, making them invisible to the naked eye. Parking radar typically uses ultrasonic sensors, which are installed at the rear of the vehicle and are often visible.3. Different warning methods: RCTA provides warnings through "signal alerts + audible alarms." When it detects approaching vehicles from either side, it displays a signal alert on the corresponding position (such as the central control screen or the BSD light on the rearview mirror) and emits a warning sound. In contrast, parking radar emits increasingly rapid beeping sounds as the vehicle gets closer to an obstacle, eventually turning into a continuous warning sound to alert the driver.
6
5
Share

How to Align the Timing Belt on a Peugeot 408?

The method to align the timing belt on a Peugeot 408 is as follows: 1. Remove the timing belt; 2. Align the marks on the two large gears at the outer end of the camshaft; 3. Align the scale on the plastic housing at the lower end of the crankshaft; 4. Rotate the crankshaft to align it with the zero mark. The Peugeot 408 is a compact 4-door, 5-seater sedan with the following dimensions: length 4750mm, width 1820mm, height 1488mm, and a wheelbase of 2730mm. It is equipped with a 1.2L turbocharged engine and a 6-speed dual-clutch transmission, delivering a maximum power of 100 kW and a maximum torque of 230 Nm.
18
3
Share

Is Trumpchi a Domestic or Joint Venture Car?

Trumpchi is a domestic car. Taking the 2019 Trumpchi GA6 Automatic Elite Edition as an example, it is a mid-size 4-door 5-seater sedan with body dimensions of: length 4891mm, width 1850mm, height 1505mm, and a wheelbase of 2815mm. The 2019 Trumpchi GA6 Automatic Elite Edition is equipped with a 1.5L turbocharged engine and a 6-speed automatic transmission, delivering a maximum power of 124 kilowatts and a maximum torque of 265 Newton-meters. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.
3
5
Share

What is the reason for the transmission light coming on and then resolving after a restart?

The reasons for the transmission light coming on and then resolving after a restart are: 1. Unstable sensor signals; 2. Poor contact of internal transmission components. The functions of an automotive transmission are: 1. To change the transmission ratio, expanding the range of torque and speed variation of the driving wheels to adapt to frequently changing driving conditions, allowing the engine to operate under favorable conditions; 2. To enable the vehicle to reverse while keeping the engine's rotation direction unchanged; 3. To use neutral gear to interrupt power transmission, allowing the engine to start, idle, and facilitating gear shifting or power output. The classifications of automotive transmissions include: 1. Manual transmission; 2. Automatic transmission; 3. Semi-automatic transmission; 4. CVT continuously variable transmission.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.