What is the fuel consumption of the 10th-generation Civic manual transmission?

1 Answers
PaigeAnn
07/29/25 9:57am
The average fuel consumption of the 10th-generation Civic in urban areas is approximately 8L per 100 kilometers. Here is some extended information about the Civic: 1. Introduction: The Honda Civic (CIVIC) offers a variety of models to cater to the tastes of consumers in different countries, including three-door hatchbacks, hardtop coupes, hybrid versions, and five-door sedans. 2. Product Features: (1) The Dongfeng Honda Civic has a stylish and fashionable exterior with smooth body lines. The hatchback design has undergone significant changes compared to the older models. (2) The interior of the Dongfeng Honda Civic is finely crafted with a fashionable design and a prominent sense of hierarchy. It is equipped with a variety of functional features, although the extensive use of hard plastics results in a less-than-ideal tactile feel. The seats offer good comfort. (3) The space performance is commendable, with ample legroom in both the front and rear seats. The front seats provide generous headroom, while the rear seats are somewhat limited in headroom. The central floor hump in the rear is not very pronounced, enhancing practicality. The storage compartments are functional, and the trunk space has been improved compared to older models. (4) The Dongfeng Honda Civic offers smooth gear shifting with clear gear positions, although some users have reported that "the gear travel is relatively short and there is some friction noise." The suspension tuning is moderately firm, and the steering wheel is quite responsive. The clutch pedal travel has been shortened compared to older models. Some users have noted that "the initial braking force is average, requiring increased pressure to achieve the desired braking effect."
Was this review help?
20
0
Share
More Forum Discussions

Does replacing the oil pump module in a BMW require programming?

It depends on the vehicle. If it's a separate control unit, then programming is required. If programming is needed, a full vehicle programming is necessary. Components of the automotive fuel system: The automotive fuel system includes components such as the fuel tank, fuel pump, fuel damper, fuel pressure regulator, fuel filter, fuel injector, thermostat timing switch, and cold start valve (cold start injector). Introduction to the gasoline pump: The four wires of the automotive fuel pump include two for the fuel level sensor (commonly known as the float), one for power supply, and one connected to the fuel gauge. The other two wires are for the fuel pump itself, one for power supply and one for the ground wire.
17
1
Share

What Causes the Abnormal Noise During Cold Start of an Audi?

Audi cold start abnormal noise is mainly caused by the following reasons: Lack of lubrication in the starter internal gears: The abnormal noise during cold start is generally due to the lack of lubrication in the starter internal gears, leading to stiffness or jamming, which affects the timely return of the gears. That is, when starting the engine, the starter rotates to drive the flywheel, thereby starting the engine. At this time, the engine speed is driven by the starter, so the engine speed is lower than the starter speed. When the engine speed exceeds the starter speed after starting, the ignition switch is manually turned off, and the starter stops. Excessive dirt inside the starter: Due to excessive dirt inside the starter and the failure of lubricating oil, the flywheel engine forcibly drives the starter to operate at its own speed. Because there is a speed difference between the two, this causes the starter to produce abnormal noise.
3
4
Share

Where is the grease fitting for the drive shaft on a Chery A3?

Chery A3's drive shaft uses the same oil as the transmission. Similar to the transmission, once the transmission is filled with oil to the appropriate level, the transfer case will also have oil. The transmission oil filler port on the Chery A3 is located under the hood, at the upper left corner of the engine. Function of transmission oil: The main function of transmission oil is to keep the gear shifting system clean and to lubricate the transmission components, thereby extending their lifespan. Changing transmission oil: Currently, there are three main methods for changing automatic transmission oil. The first method is similar to changing engine oil, where the transmission's drain plug is loosened to drain the oil before refilling. The second method involves removing the oil pan to drain and refill the oil. The third method, which is more advanced, uses a circulation machine to change the automatic transmission oil.
17
3
Share

Choosing Between SAIC Volkswagen and FAW Volkswagen

If you prefer German style, then FAW Volkswagen models are more suitable. If you just want to buy a family-oriented model, then SAIC Volkswagen would be a better choice. Below are the relevant introductions of FAW Volkswagen and SAIC Volkswagen: 1. Currently, whether it's FAW Volkswagen or SAIC Volkswagen, their models use the same engines and transmissions, and the manufacturing processes strictly adhere to the requirements of Volkswagen Germany. Therefore, in theory, there is no difference between FAW Volkswagen and SAIC Volkswagen in terms of technology and quality; 2. FAW Volkswagen models have a more authentic German Volkswagen heritage, while SAIC Volkswagen models are primarily redesigned for the Chinese market.
8
1
Share

Should a New Car's Bumper Be Repaired or Replaced After a Collision?

You can choose to repair or replace the bumper based on its material and the extent of the damage. Specific judgment methods: If it is made of metal and the damaged area is relatively small, welding repair can be performed. If the damage exceeds the repair standard, replacement is necessary. If it is made of plastic, you can choose to repair or replace it based on your financial situation. If there is no major damage, you may also choose to ignore it. Methods for repairing a bumper: If it is a plastic bumper, it is recommended to use high-quality structural adhesive for bonding and repainting. If it is a metal bumper, welding should be done at an auto repair shop. After repairing cracks or deformations in the bumper, the next step is to address the car's paint surface. DIY repairs may not meet dust-free requirements, which can affect the paint's finish. Therefore, it is advisable to have it handled at an auto repair shop.
12
4
Share

What to Do When There's a Yellow Kettle Light on the Car Dashboard?

A yellow kettle light on the car dashboard is the engine oil pressure indicator light. When this warning light appears on the dashboard, you need to check the following: whether the engine oil is insufficient, whether the engine oil has reached its replacement interval, whether there is an engine oil leak, whether the engine oil pump is damaged, and whether the oil pressure sensor is faulty. Relevant information about engine oil is as follows: 1. Introduction: Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). It serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption in the engine. 2. Composition: Engine oil consists of base oil and additives. Base oil is the main component of lubricating oil, determining its basic properties, while additives compensate for and improve the shortcomings of the base oil, imparting new characteristics, making them an essential part of lubricating oil.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.