What is the fuel consumption of the 10th generation Accord 1.5t?

2 Answers
DeBethany
07/24/25 1:01pm
According to the comprehensive fuel consumption data from the Ministry of Industry and Information Technology, the 10th generation Accord 1.5t version has a comprehensive fuel consumption of 6.4L/100km. However, based on the actual test data from some Accord owners, the fuel consumption is generally around 7-8L/100km. Of course, the fuel consumption of the 10th generation Accord 1.5t version may vary depending on the driving habits of the owner. Below is a detailed introduction to the 10th generation Accord: 1. The body dimensions of the 10th generation all-new Accord are 4893mm in length, 1862mm in width, 1449mm in height, and 2830mm in wheelbase. 2. In terms of power, the 10th generation Accord is equipped with a 1.5T inline 4-cylinder engine, with a maximum torque of 260N·m, a maximum power output of 143kW, and a maximum horsepower of 194. The transmission part features a CVT continuously variable transmission, which provides smoother gear shifting. Such power can meet the needs of most consumer groups.
Was this review help?
7
4
Share
SanHadley
08/11/25 7:06am
I've driven the 10th-generation Accord with the 1.5T engine for a while now. Under urban driving conditions, the fuel consumption is around 9 to 10 liters per 100 kilometers, and it can be even higher in heavy traffic. On the highway, it's much more fuel-efficient, staying at around 6.5 to 7 liters. This has a lot to do with my driving habits—frequent rapid acceleration or hard braking increases fuel consumption, so I recommend using the Eco mode for better efficiency. Weather also plays a big role; running the AC in summer adds an extra 0.5 to 1 liter of fuel, so it's best to regularly check if the AC system is running efficiently. Additionally, routine maintenance like oil changes and cleaning the air filter can optimize fuel economy. Paying attention to these small details every month helps me save quite a bit on fuel costs. If you often drive during rush hour, urban conditions can indeed make fuel consumption fluctuate, but overall, this car strikes a good balance between performance and efficiency.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

How to Remove Odor from the Car?

Here are methods to eliminate odor from the car: 1. Ventilation: Increase ventilation to help dissipate the odor. 2. Odor Removal: Place materials like Ye Guang Ni in the car to better remove harmful substances caused by odors. 3. Fruit Peels: Use items such as coffee beans or pomelo peels to neutralize odors. Below is additional information: 1. Ventilation: The simplest way to eliminate car odor is frequent ventilation, along with placing odor-absorbing materials in the car. 2. Bamboo Charcoal Bags: Bamboo charcoal bags can absorb odors due to their porous structure, which traps particles. They are also inexpensive and take up minimal space in the car.
7
5
Share

How to Remove Adhesive Residue from Car Window Film?

Here are the steps to remove car window film: 1. Evenly apply edible vinegar to the adhesive residue using a cotton swab. Through the glass, you'll immediately see the vinegar slowly spreading between the glass and the adhesive; 2. Use the cotton swab to scrub back and forth on the adhesive residue. After a few minutes, the adhesive will start peeling off in pieces; 3. Wipe off any remaining residue with paper. Additional relevant information: Car window film serves as a protective measure for car glass. When the glass shatters, the fragments adhere tightly to the film surface, maintaining their original shape without scattering or deforming. Moreover, the window film can withstand temperatures up to 500°C, effectively preventing fire hazards and protecting occupants from injury.
9
0
Share

How to Use the Nissan Qashqai Wiper?

There is a wiper control lever on the lower left side of the steering wheel. Push the wiper lever upward one gear to start the wiper; when turning it off, push the lever downward to the OFF position. Precautions for using the wiper: 1. Maintain cleanliness: When there are streak marks on the glass surface, the wiper blade may be dirty. Spray a small amount of alcohol on a towel and wipe the dirty areas and places with residue. Cleaning it once a month can improve the wiper's performance. 2. Check the rubber: If there is abnormal noise on the windshield, it may be due to hardening, wear, or cracks in the wiper blade rubber. If the wear is not severe, you can sand it with sandpaper. 3. Avoid sunlight: Try to park the car in a ventilated and shady place.
14
4
Share

How to Steer the Wheel for a 90-Degree Turn?

Before entering the 90-degree turn, keep the car as far away from the turning point marker pole as possible within the lane lines and proceed slowly. When the center of the small triangular window on the front side window near the turning point aligns with the turning point, turn the steering wheel three full turns toward the turning point until it reaches the limit. After passing the turn, straighten the wheel when the car's front is aligned. Relevant details are as follows: 1. Method: Keep the right side of the car close to the outer right-angle edge line while moving forward. When the middle of the left and right front door triangular windows aligns with the inner and outer right-angle lines, turn the steering wheel fully to the left or right. Straighten the wheel when the car is aligned. 2. Resistance: Note that the resistance during straight driving differs from that during a turn. During a low-speed 90-degree turn, steering the wheel increases resistance, which may cause the car to stop. Therefore, slightly release the clutch during the turn. After completing the turn, the speed will increase, at which point lightly press the clutch to reduce the speed.
4
2
Share

What Are the Reasons for High Fuel Consumption in a Car?

The main reasons for high fuel consumption in a car are: 1. Poor driving habits of the driver; 2. Wear and tear of engine-related components; 3. Faulty oxygen sensor; 4. Low tire pressure or severe tire wear; 5. Incorrect fuel grade, clogged fuel lines, or improperly gapped spark plugs. Precautions for refueling include: 1. Use automotive gasoline; inappropriate fuel entering the fuel system may damage the fuel system and engine; 2. Do not use gasoline containing methanol or alcohol; 3. Avoid spilling fuel on the paint surface to prevent damage; 4. If the fuel door is frozen and cannot be opened, gently push or tap the fuel door to remove ice and open it; 5. Prevent excessive fuel pressure from causing spraying; 6. Insert the fuel nozzle deep into the fuel tank to avoid overflow or spillage, which could lead to fire and explosion.
17
0
Share

Can Seat Belts in Cars Be Replaced?

Seat belts in cars can be replaced. Seat belts need to be replaced under the following circumstances: 1. The internal retractor spring of the seat belt has aged, causing the seat belt to become too loose or fail to tighten promptly. If the seat belt is not replaced, in an emergency, excessive looseness may allow the occupant to slip out from under the seat belt, resulting in serious injuries. 2. If the seat belt has once endured a strong tensile load during use, even if it appears undamaged, it should be replaced and not continued to be used. 3. If the car has been involved in a collision that caused the airbags to deploy, the seat belts must be replaced promptly. Additional Information: While the car is in motion, seat belts play a crucial role. In the event of a collision, seat belts securely restrain the occupants in their seats, working in conjunction with the cushioning protection of airbags to significantly reduce the impact-related injuries.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.