What is the fuel consumption of the 1.4T Magotan?

3 Answers
DiWeston
07/28/25 12:14pm
The fuel consumption of the 1.4T Magotan is 7.1L/100km. The fuel consumption of the 1.4T Magotan is not high. Methods to reduce fuel consumption are as follows: Avoid prolonged engine idling: When the car is idling, the fuel consumption is much higher than during normal driving. Therefore, it is best to turn off the engine if the vehicle is not moving for a long time, such as when waiting for someone. Avoid sudden braking and acceleration as much as possible: A smooth and steady driving style is the most fuel-efficient. Try to avoid stomping on the accelerator during the starting phase. Maintain an appropriate driving speed: Generally, the most fuel-efficient speed is around 88.5 km/h. Keep the vehicle's wind resistance low: At high speeds, a significant portion of the power is used to overcome wind resistance. Therefore, try not to load items on the roof or make unreasonable modifications.
Was this review help?
7
3
Share
Denise
08/11/25 5:02pm
I've been driving this 1.4T Magotan for over two years, with the combined fuel consumption generally fluctuating between 7.5 to 8.5L. During morning and evening rush hours in the city with heavy traffic, the fuel consumption can rise to around 9L; on weekends when cruising on the highway with cruise control, it can drop to about 5.8L. Driving habits have a significant impact on fuel consumption—for instance, aggressive acceleration and sudden braking can increase fuel consumption by over 1L. The average fuel consumption displayed on the car's dashboard, 7.9L, is quite close to the actual data I've calculated from refueling. After regular maintenance, the fuel consumption tends to stabilize, and I don't need to worry about fuel efficiency until at least 5,000 kilometers after an oil change. The 1.4T engine paired with the dual-clutch transmission in this car is indeed fuel-efficient, performing much better than the older naturally aspirated models.
Was this review help?
15
5
Share
Expand All
Rex
09/28/25 6:35am
I commute daily in a Magotan 1.4T, covering a 15-kilometer mixed urban/elevated road route each way. The displayed average fuel consumption is 8.2L/100km, which works out to about 60 cents per kilometer in actual cost. The most fuel-efficient scenario is highway driving at 120 km/h, where consumption stays just over 6L. However, using AC in summer significantly increases fuel usage - when idling at red lights with the engine running, AC operation adds about 1L to consumption. I maintain tire pressure at 2.5bar, as lower pressure increases rolling resistance. After the first maintenance service, the engine feels smoother and fuel efficiency improved by about 0.5L compared to when new. For a 1.4-ton vehicle, this fuel consumption is acceptable given its adequate space and power. My monthly fuel expense of 800 yuan stays within budget.
Was this review help?
5
0
Share
Expand All
More Forum Discussions

Why does the Tianjian 150's malfunction indicator light come on?

Tianjian 150 malfunction indicator light comes on. Remove the battery cable, wait for half an hour, and then reinstall it to resolve the issue. Reasons: Faults in the fuel supply system, ignition system, intake system, exhaust system, or various sensor components. You can use the elimination method to check each one by one. If the engine light comes on while driving, have the fault code checked at a repair shop. Engine maintenance: The fuel pressure at idle should be around 250 kPa. As the throttle opens, the fuel pressure should gradually increase. The fuel pressure at full throttle should be approximately 300 kPa. If the fuel pressure changes with the throttle opening but remains consistently high, it indicates a fault in the fuel pressure regulator, which should be replaced.
18
2
Share

What are the factors affecting the cold filter plugging point of diesel?

Factors affecting the cold filter plugging point of diesel include the composition of diesel (content of straight-chain alkanes). Brief introduction of factors: High density generally leads to an increase in alkane content after hydrogenation, resulting in a rise in the cold filter plugging point temperature. The presence of reforming agents in the reaction can reduce the pour point and lower the cold filter plugging point temperature. Alternatively, the 95% point of diesel can be reduced during atmospheric diesel extraction (reducing density), or pour point depressants can be added to the diesel. Diesel cold filter plugging point: The cold filter plugging point of diesel refers to the lowest temperature at which a diesel sample, cooled under specified conditions, is drawn under a pressure of 1961Pa (200mm water column) to pass through a 363-mesh filter, and the filter is blocked to the point of no flow or the flow rate is less than 20ml/min.
9
0
Share

How Long Does It Generally Take to Learn Car Maintenance?

Car maintenance learning typically takes 2-3 months. Definition of car maintenance: Car maintenance refers to the periodic inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain parts of a car as preventive work, also known as car servicing. Contents of major car maintenance: Major maintenance refers to the routine servicing performed at the time or mileage specified by the manufacturer, which includes changing the engine oil, oil filter, air filter, and fuel filter. Interval for major car maintenance: Major maintenance is based on the existence of minor maintenance, and these two types of maintenance are generally performed alternately. The interval varies depending on the car brand, so it is best to follow the manufacturer's recommendations.
4
2
Share

What are the precautions for buying a used motorcycle?

Precautions for buying a used motorcycle are as follows: Must have formal transfer certificate: To legally ride a motorcycle on the road, it must be licensed. Without a transfer certificate, licensing is impossible. Therefore, it's essential to have an official transfer certificate proving the motorcycle has been formally transferred to the buyer. Motorcycles less than one year old cannot be transferred. The transfer must be processed at the vehicle management office. Pre-purchase evaluation: Before purchasing a used motorcycle, it's crucial to research the brand's used models. Check the motorcycle's odometer reading to see how many kilometers it has been ridden and evaluate its remaining lifespan. This will help avoid being scammed.
10
4
Share

What is the fuel tank capacity of a motorcycle?

The fuel tank capacity of a motorcycle is around 5L. Excessive oil temperature: Frequent operation or prolonged running of the oil pump can cause the oil temperature to rise excessively, which in turn thins the oil and prevents the oil pressure from increasing. External leakage in the hydraulic system: Address any oil leakage points, primarily on sealing surfaces, such as damaged seals on oil pipe joints, leakage at the sealing planes of the relief valve, solenoid directional valve, hydraulic control check valve, and oil circuit integration, as well as external leakage at the piston rod of the oil cylinder. The diagnosis and handling of this fault are relatively straightforward and intuitive. Internal oil leakage in the oil cylinder: Internal seal leakage in the oil cylinder is not visible externally, making it more difficult and complex to determine if the internal seals are worn or damaged. The diagnostic method involves first performing a tightening action with the oil cylinder until it no longer advances and the oil pressure stops rising. Maintain the tightening action and disconnect the return oil pipe from the oil cylinder joint. If hydraulic oil continuously flows from the return oil pipe joint of the oil cylinder, and since the piston has stopped advancing, it can be concluded that the piston seal is damaged and should be replaced.
1
5
Share

Why is the engine loud at 1500 to 2000 RPM?

Engine noise at 1500 to 2000 RPM is caused by the sound of the radiator's cooling fan working during idle, or excessive clearance between the piston and cylinder wall during low speed or gear shifting. Poor fuel quality: When a car uses low-quality fuel, combustion inside the engine deteriorates, causing the engine to vibrate and produce noise. Switching to higher-quality fuel can resolve this issue. Loose engine mounts: Since the engine inside the engine bay relies on components like engine mounts for support and fixation, if these parts become worn or loose, the engine may shift during operation, resulting in noise. Tightening the engine can solve this problem. Plastic component movement: Another possible cause is the movement of plastic components in the engine bay, such as the engine cover or intake pipe. If these plastic parts become loose, they may collide with the engine bay, generating noise.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.