What is the fuel consumption of the 09 Kia Carens?

1 Answers
Maria
07/29/25 7:03am
The average fuel consumption of the 09 Kia Carens is 9.5 liters per 100 kilometers. Here is the relevant introduction of the 09 Kia Carens: 1. Power: Equipped with a 2.0-liter DOHC inline 4-cylinder naturally aspirated engine, the Kia Carens can provide a maximum horsepower of 150 hp at 6500 rpm and a maximum torque of 19.8 kg·m at 4800 rpm. 2. Timing system: It features a Dual-CCVT dual continuous variable valve timing system; through valve timing control, it can not only improve the engine's torque and horsepower, but also make the emissions cleaner.
Was this review help?
17
2
Share
More Forum Discussions

Can Cockroaches in a Sedan Car Run Out on Their Own?

Cockroaches in a sedan car can run out on their own, but it is necessary to keep the interior clean. Here are solutions to prevent mice from entering the engine: 1. Avoidance: Park the car as far away as possible from areas where mice are active, such as garbage dumps, ditches, or grassy areas. 2. Inspection: Regularly inspect and clean the engine to check for any signs of mouse activity and ensure the engine compartment remains clean. Periodically examine the car's front grille for any damage or detachment and address any issues promptly. 3. Install rodent repellents: Fit an electronic rodent repellent in the engine compartment to use ultrasonic waves to drive away mice. Placing rodent repellent bags or camphor balls in hidden spots within the engine compartment can also be effective. Installing protective barriers around the car is another preventive measure.
6
4
Share

What license plate is issued for plug-in hybrid vehicles?

Plug-in hybrid vehicles are issued green license plates, which are not subject to the traffic restriction policy based on the last digit of the plate number. The primary color of these plates is green. Green license plates are divided into: 1. Small new energy vehicle plates use gradient green as the background color; 2. Large new energy vehicle plates use a combination of yellow and green as the background color. License plates refer to vehicle plates, which are panels hung on the front and rear of the vehicle, made of materials such as aluminum, plastic, or stickers, displaying the vehicle's registration number, registration region, or other basic information. Plug-in hybrid vehicles are classified into: 1. Micro hybrid; 2. Mild hybrid; 3. Moderate hybrid; 4. Full hybrid.
18
1
Share

How to Replace the Wiper Blades on a Honda Fit?

Method for replacing wiper blades on a Honda Fit: 1. Press the lock on the hook at the end of the wiper arm inward, then pull the wiper bracket downward with a bit of force to remove it; 2. You will notice that one side of the wiper blade's fixing groove has a fixed end while the other side does not; 3. Pinch the end with the fixed position and pull the wiper blade backward with force to remove it; 4. Shake the removed wiper blade a couple of times to loosen the two metal strips embedded inside; 5. Install the metal strips onto the new wiper blade and reattach it to the wiper bracket. The wiper is a tool on the front windshield of motor vehicles designed to simply clear rainwater and other debris that may obstruct vision. The dimensions of the Honda Fit are 4065mm in length, 1695mm in width, and 1525mm in height.
15
1
Share

Is a tire pressure of 2.2 a bit low in summer?

Tire pressure of 2.2 is slightly low. Here is relevant information about tire pressure: 1. Function: Tire pressure, strictly speaking, refers to the air pressure inside the tire. In terms of car maintenance, the engine is the heart of the car, and damage to the engine will lead to the end of the car's life. Similarly, tire pressure is the blood pressure of the car, and the level of tire pressure plays a crucial role in the performance and power of the car. 2. Indicator: Tire pressure is an indicator of the car's load capacity. The load capacity of the car depends on the level of tire pressure. According to the relationship between the tire's load index, tire pressure, and load capacity, the higher the tire pressure, the greater the load capacity; the lower the pressure, the smaller the load capacity.
8
2
Share

How to Turn On the Heater in the 10th Generation Civic?

The method to turn on the heater in the 10th generation Civic is to open the air conditioning system and then adjust the temperature setting higher using the temperature control knob. The 10th generation Civic is equipped with an automatic temperature control air conditioning system. The air conditioning circulation system consists of major components such as the compressor, condenser, expansion valve, and evaporator. The refrigerant circulates within the system, absorbing heat from the car's interior through the principle of heat transfer in the evaporator to achieve cooling. The heater system operates on a different principle from the air conditioning system. The heater utilizes the temperature of the coolant from the engine's cooling system, and a blower transfers heat from the heater core to the interior. Therefore, turning on the heater does not require activating the air conditioning. The 10th generation Civic has a body length, width, and height of 4649mm, 1800mm, and 1416mm respectively, with a wheelbase of 2700mm.
13
0
Share

What does the ECO button in a car mean?

ECO refers to the car's economic driving mode. ECO is an English abbreviation formed from the words Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active Eco driving mode and non-active Eco driving mode. When the Eco indicator light on the dashboard illuminates, it indicates that the vehicle's economic mode has been activated. Eco mode can be either active or non-active. The difference lies in the fact that the active mode has its own dedicated button, allowing the driver to choose whether to enable it. When the driver presses the Eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. Non-active Eco mode does not have a dedicated button. When the Eco indicator light on the dashboard illuminates, it serves merely as a reminder function. The Eco system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the Eco indicator light. Most vehicles employ the active Eco driving mode, meaning they have a dedicated switch button. Therefore, during daily driving, the Eco mode can generally be enabled. However, it is unnecessary to activate Eco mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode—especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of Eco mode but could also negatively impact the vehicle's power. Additionally, the Eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing the Eco mode to automatically deactivate. During idle parking or when in N/P gear or manual mode, the Eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the Eco mode will not function in such scenarios.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.