···
Log in / Register

What is the fuel consumption of the 03+?

4 Answers
LaKathryn
08/31/25 3:40am

The fuel consumption of the Lynk & Co 03+ is 10.5 liters per 100 kilometers. Here are specific methods to reduce fuel consumption: Lightly press the accelerator: When the car starts at low speed, it is the peak period of fuel consumption. Therefore, lightly pressing the accelerator during startup to prevent excessively high RPM can effectively reduce fuel consumption. Avoid high RPM: Try to avoid unnecessary high RPM as fluctuating engine speeds can significantly increase fuel consumption. Regular maintenance: Change the engine oil and remove carbon deposits. Avoid emergency braking: Anticipating road conditions in advance not only improves driving safety but also saves fuel, such as gradually slowing down before traffic lights and utilizing inertia to coast.

Was this review help?
13
4
Share
VonIvan
09/12/25 7:02am

I've been paying attention to the fuel consumption performance of the Lynk & Co 03+. Equipped with a 2.0T turbocharged engine, its officially announced combined fuel consumption is approximately 8.5-9L/100km. However, in actual driving conditions, there's quite a difference: in congested urban traffic, it can soar to over 11L, while highway cruising can reduce it to 7-8L. Factors affecting fuel consumption include driving habits, such as rapid acceleration and hard braking, which can double the consumption; the amount of load also plays a role, with a full load consuming more fuel. Additionally, using air conditioning in summer or engaging sport mode adds extra burden. Overall, it's a balance between performance and fuel efficiency. I recommend cultivating good driving habits and regularly checking the vehicle's condition to optimize the numbers, as prolonged high fuel consumption not only wastes money but also impacts the environment.

Was this review help?
20
2
Share
Expand All
BarrettLee
10/26/25 7:52am

I've been commuting with my 03+ for over a year, with urban fuel consumption often exceeding 10L/100km, especially during peak traffic jams. On highways, it's much better, averaging 7-8L; however, it can rise to 9L in rainy conditions or poor road surfaces. Using air conditioning increases consumption by about 0.5L, but overall it's more fuel-efficient than some SUVs. My experience shows that maintaining a steady speed and minimizing brake usage effectively controls fuel consumption, such as using cruise control. Additionally, regular tire pressure maintenance is crucial for reducing fuel consumption. I make it a habit to check tire pressure every two weeks, ensuring it's within the recommended range, which makes the vehicle more efficient to drive, saving money and being environmentally friendly in the long run.

Was this review help?
3
2
Share
Expand All
SkylarLee
12/09/25 8:12am

Fuel consumption is directly related to driving habits. Aggressive acceleration, high-speed driving, or frequent starts can increase consumption. For example, the 03+ can consume over 11L in congested urban areas. It is recommended to drive smoothly and use the eco-driving mode, which can significantly reduce consumption to around 9L. Maintenance is also important: insufficient tire pressure or a dirty air filter can increase fuel consumption, so regular replacement and servicing of equipment are necessary. Keeping the vehicle clean and reducing resistance are beneficial for energy efficiency. These habits not only save fuel but also contribute to environmental protection by reducing carbon emissions.

Was this review help?
14
4
Share
Expand All
More Forum Discussions

What are the reasons for the loose feeling in the Lavida's chassis?

Lavida's chassis feeling loose may be due to its own quality looseness, insufficient body rigidity, or looseness during use. Below are the specific reasons: Own quality looseness: Some brands or models aim to achieve a different comfort level and shock absorption characteristics by setting the damper's damping relatively low. Therefore, when encountering road undulations, the rebound action reacts slower, which may give a floating sensation. Insufficient body rigidity: Poor rigidity can lead to weak torsional resistance of the body and may even be unsafe to some extent. Thus, rigidity can only be considered as one of the indicators for safety. Some automakers may intentionally set lower rigidity to achieve certain shock absorption effects. Looseness during use: The suspension system or various bushings in frequently moving parts will inevitably age first. These are consumables, and once aged, the feeling of "looseness" becomes obvious. The body's own shock absorption can also cause metal fatigue in certain parts, leading to deformation. Although this sounds alarming, it is inevitable. Under normal circumstances, it generally does not affect usage, but over time, the elasticity of parts for rebound and repositioning will decline, also contributing to the loose feeling.
4
4
Share

Does the CHR automatically lock when leaving?

Toyota CHR doors do not automatically lock after exiting the vehicle. Under factory settings, the C-HR is not equipped with an automatic locking function. If you wish to enable this feature, it can only be achieved through aftermarket installation. Methods to enable automatic locking: There are three types of car doors: forward-opening doors, reverse-opening doors, and horizontally sliding doors. Forward-opening doors can still be closed by the pressure of airflow while the car is moving, making them safer and more convenient for the driver to observe the rear when reversing, hence widely adopted. Reverse-opening doors, if not tightly closed while driving, may be forced open by oncoming airflow, thus used less frequently, generally only to improve entry/exit convenience or for ceremonial purposes. Horizontally sliding doors have the advantage of being able to fully open even when the side of the car is close to an obstacle. Via OBD interface: Currently, the most common method in the market for Toyota C-HR to add an automatic locking function is by directly plugging into the OBD interface to enable the locking feature. It is usually plug-and-play, requiring no wiring harness connection or system matching, which greatly enhances the convenience for vehicle owners during use.
19
0
Share

Is the Challenger SRT the Hellcat?

The Challenger is the Hellcat. Compared to the standard Hellcat, the Dodge Challenger SRT Hellcat Redeye Widebody has a top speed of 203 mph and shaves off a precious tenth of a second in the quarter-mile. Related details are as follows: 1. Powertrain: The Dodge Challenger Hellcat features two headlights as sharp as an eagle's eyes, with fluid body lines exuding agility. Its potent power and enduring stamina perfectly blend speed, passion, and personality. At its heart lies a 6.2L HEMI V8 supercharged engine - even more powerful than the 640-horsepower V10 engine used in the Dodge Viper, delivering a staggering 717 horsepower in this ultimate Challenger. 2. Interior: The Dodge Challenger Hellcat's interior exceeds expectations with premium materials. It comes equipped with aluminum paddle shifters, Sirius XM Travel Link system, LCD display screen, and GPS navigation. The instrument cluster is equally fierce - the red halo around the gauges resembles a frenzied wildcat, while the central cat logo and 340-mph speedometer clearly declare this is no ordinary Dodge, but an SRT Hellcat.
15
5
Share

What is the Laifejiang car?

Laifejiang is the nickname of the Honda LIFE, which is positioned as a compact sedan and is Dongfeng Honda's first A0-class model. Currently, there are four available models of the Honda LIFE: the LIFE 2021 1.5L CVT CRO-SS Lingqu Edition, LIFE 2021 1.5L CVT SPORT Xindong Edition, LIFE 2021 1.5L CVT CRO-S Lequ Edition, and LIFE 2021 1.5L CVT CRO-S Lequ Edition, all with a fuel consumption of 5.6L/100km. Dimensions of the LIFE: Both the Lingqu Edition and Lequ Edition have body dimensions of 4111mm in length, 1725mm in width, and 1567mm in height, with a wheelbase of 2531mm. The Xindong Edition and Lingdong Edition have body dimensions of 4109mm in length, 1694mm in width, and 1537mm in height, with a wheelbase of 2530mm. Engine of the LIFE: The Lingqu Edition, Lequ Edition, Xindong Edition, and Lingdong Edition all use a 1.5L displacement, naturally aspirated engine.
14
3
Share

What are the differences between imported Sienna and domestically produced Sienna?

The differences between imported Sienna and domestically produced Sienna are mainly reflected in the interior decoration and seats. Interior decoration: The differences in the interior are quite significant. In the center console section, the domestically produced Sienna SIENNA is equipped with a full LCD instrument panel, and the size of the central control screen is larger. In contrast, the imported version features a mechanical instrument panel combined with a 4/7-inch TFT LCD instrument panel. In practical use, although the central control screen of the domestically produced Sienna SIENNA is large, the overall system's smoothness is not very fluid. On the other hand, the imported Sienna SIENNA's physical buttons are more conducive to precise control, enhancing driving safety. Seat differences: The domestically produced Sienna SIENNA lacks a leg rest design in the rear seats, and rear ventilated seats are only available in high-end versions of the domestically produced model. Additionally, the domestically produced Sienna SIENNA has eliminated the third-row sunshade, third-row ISOFIX child safety seats, 12V AC power outlet, and the relatively low-quality plush carpet. Furthermore, the seats in the domestically produced Sienna SIENNA use imitation leather material, which is significantly different from the Softex genuine leather used in the imported version.
2
3
Share

What are the causes of abnormal noise in the Leiling Hybrid transmission?

Leiling Hybrid transmission abnormal noise is caused by bearing wear, looseness, or constant meshing gear noise; poor gear meshing inside the transmission; the specific causes and solutions for vehicle transmission abnormal noise are as follows: Bearing wear, looseness, or constant meshing gear noise: If abnormal noise is heard from the transmission in neutral, and the noise disappears when the clutch is depressed, it is generally due to wear, looseness of the front and rear bearings of the transmission first shaft, or constant meshing gear noise. If abnormal noise occurs when shifting to other gears, it is mostly due to noise from the rear bearing of the second shaft. For severely loose or damaged bearings, they should be promptly sent to a repair shop for maintenance or replacement. Poor gear meshing inside the transmission: If abnormal noise occurs in the transmission during low-speed driving, and it still appears after vehicle acceleration and when shifting gears, it may be caused by poor gear meshing inside the transmission. Generally speaking: if the noise is small and uniform, the vehicle can still be used; if the noise is uneven and very loud, the transmission should be disassembled for inspection, and repaired or replaced.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.