What is the fuel consumption of SAIC Maxus V80 per 100 kilometers?

What are the reasons for the sudden stiffness and inability to press the brake when reversing?

Here are the reasons for the sudden stiffness and inability to press the brake when reversing: Reason: One is a problem with the vacuum booster pump, making it difficult to press the brake without assistance. Another situation is that after the engine is turned off, the brake is pressed again, depleting the vacuum created by the vacuum booster pump, and subsequent braking relies solely on manual force. Related introduction to brakes: The brake is a mechanical braking device that can slow down the vehicle speed. Simply put: The car brake pedal is located under the steering wheel. Pressing the brake pedal causes the brake lever linkage to be pressurized and transmitted to the brake pads on the brake drum, clamping the brake disc to slow down or stop the car. The manual brake in a car is located next to the gear shift, connected to the brake lever.

10

2

Share

What does a guide lane line mean?

Guide lane lines are directional lane markings used to indicate the direction vehicles should follow when entering an intersection. These markings are typically painted at busy traffic intersections to clearly define driving directions, ensure orderly traffic flow, and alleviate congestion. Types and functions of guide lane lines: Guide lane lines are marked on the road surface of each lane and can be categorized into variable and fixed types. They usually appear at high-traffic intersections to guide vehicle direction, maintain orderly traffic flow, and reduce congestion. Fixed guide lane lines include straight lanes, left-turn lanes, and right-turn lanes, while variable guide lane lines include combined left-turn and U-turn lanes, combined right-turn and straight lanes, and tidal flow lanes. Rules for driving in variable guide lanes: Variable lanes are typically set as combined left-turn and U-turn lanes or combined right-turn and straight lanes. If the current lane direction is unclear, drivers can follow the flow of traffic. For example, if there are fewer left-turning vehicles than straight-moving vehicles, the variable lane may be designated for straight movement. For tidal flow lanes, drivers must follow the directional signs based on the time of day. For instance, during morning rush hours, the variable lane may be for straight movement, while during evening rush hours, it may switch to left turns. If a variable guide lane has no directional indicators or markings, drivers may change lanes to the left or right as needed.

17

4

Share

What is the difference between guide lines and channelizing lines?

The purpose of setting channelizing lines is to ensure that every vehicle can "follow its lane", playing a role in regulating, guiding, and warning traffic, thereby reducing traffic accidents. Guide lines are set at the entrance section of intersections as lane demarcation lines, called guide lines, used to indicate the position of guide lanes where vehicles should drive according to the guiding direction. Channelizing lines: The form of channelizing lines mainly consists of one or several white V-shaped lines or diagonal line areas set according to the terrain of the intersection, indicating that vehicles must drive along the prescribed route and must not cross or drive over the lines. They are mainly used at overly wide, irregular, or complex intersections, ramp entrances of interchanges, or other special locations. Guide lines: Guide lines are set at the entrance section of intersections as lane demarcation lines, called guide lines, used to indicate the position of guide lanes where vehicles should drive according to the guiding direction; such markings are generally painted at intersections with heavy traffic to clarify the direction of travel, ensure each vehicle follows its lane, and alleviate traffic pressure.

18

1

Share

When the car tail deviates to the right while reversing, which way should the steering wheel be turned?

When the car tail deviates to the right while reversing, turn the steering wheel to the right. Here are the detailed instructions: Principle of direction correction: Take the car tail as the reference. If the tail tends to lean right, turn the steering wheel right; if the tail leans left, turn it left, then straighten in the opposite direction. Reference points for reversing into a parking space: Lines drawn on the ground can be seen through the rearview mirror; the side of another car or a wall makes it easy to spot deviation—look for a properly parked car as a reference; the wall at the rear of the car is a bit more challenging—look back directly (not through the rearview mirror) and adjust the direction at any time to ensure the car is perpendicular to the wall. Mastering basic techniques: Before reversing, observe the surroundings carefully and decide whether the tail should go left or right. Turn the steering wheel left to make the tail go left, and turn it right to make the tail go right.

2

4

Share

Why is the reverse light always on?

The reverse light staying on continuously may be due to a faulty reverse switch. Here are the details: Influencing factors: Poor performance of the reverse radar itself: This is caused by the reverse radar control unit's own poor performance; Abnormal connection of related wiring. Introduction to reverse lights: Reverse lights are installed at the rear of the vehicle to illuminate the road behind and warn vehicles and pedestrians that the car is reversing. All reverse lights are white. Working principle of reverse lights: It is a normally open switch (normally disconnected). When the reverse gear is engaged, the mechanical mechanism presses down the switch contacts; this closes the circuit, turning on the reverse light and triggering the reverse gear warning sound. When the reverse gear is disengaged, the switch contacts spring back, and the reverse light circuit returns to the open state. Generally, the reverse light switch in a tractor is installed on the transmission and is triggered by a depression on the gear shift lever.

4

0

Share

What is the use of the reversing mirror image?

Here is an introduction to the functions of the reversing mirror image: Use of auxiliary lines: Static reversing auxiliary lines do not change during the reversing and steering process. Dynamic reversing auxiliary lines: During the reversing and steering process, the auxiliary lines in the reversing image automatically calculate the vehicle's reversing trajectory based on the steering wheel's rotation angle, helping the driver predict the position after reversing and plan the reversing route in advance. The role of the reversing image: The reversing image compensates for the lack of visualization in reversing radars. It features digital display + sound alerts + real image display + night vision + vehicle multimedia performance (optional), addressing the issue of too many blind spots in ultrasonic reversing radars.

2

1

Share

What is the fuel consumption of SAIC Maxus V80 per 100 kilometers?

What are the reasons for the sudden stiffness and inability to press the brake when reversing?

What does a guide lane line mean?

What is the difference between guide lines and channelizing lines?

When the car tail deviates to the right while reversing, which way should the steering wheel be turned?

Why is the reverse light always on?

What is the use of the reversing mirror image?

What car has an inverted H logo?

Will points be deducted for changing lanes by crossing the diversion line?

Should You Press the Clutch or the Accelerator When Reversing?

What to Press When Reversing?