···
Log in / Register

What is the fuel consumption of Li Auto?

3 Answers
BellaFitz
09/09/25 3:21am
Li Auto currently only has one model, the Li ONE, with an actual fuel consumption of 6.8L~8.3L/100km. Here is the relevant information: Exterior and Interior: In terms of body layout, the 7-seater version has been discontinued, with the third-row space increased by 41mm, and a newly designed steering wheel is adopted. The body comes standard with four metallic paint colors: black, white, gray, and silver, along with three special edition colors: Baby-Blue, Deep-Green, and Tech-Blue, while the current blue color has been discontinued. Powertrain: The powertrain of Li Auto consists of a 1.2T three-cylinder direct-injection engine + a 40.5kwh ternary lithium battery + dual motors (100kw front and 140kw rear) + a 100kwh generator.
Was this review help?
19
0
Share
EmeryAnn
09/20/25 8:10am
With over 20 years of driving experience, I believe ideal fuel consumption varies from person to person. However, for regular compact cars, maintaining around 6 liters per 100 kilometers is considered decent. In my daily driving, fuel efficiency is primarily influenced by driving habits—avoiding sudden braking and rapid acceleration can save significant fuel, especially in urban traffic jams. My old car was an economy model, typically averaging between 5.5 to 7 liters. But if you drive an SUV or a high-displacement vehicle, fuel consumption will be higher, with an ideal range possibly reaching 9 liters. I think the key to fuel efficiency lies in regular tire and engine maintenance, as well as smart route planning to minimize empty runs. Ultimately, don’t obsess over the numbers—the goal is to drive as efficiently as possible, saving money, being eco-friendly, and avoiding constant worry about fuel costs.
Was this review help?
13
1
Share
Expand All
Tyler
11/03/25 8:33am
As an environmentally conscious individual, I believe ideal fuel consumption should be as low as possible. For instance, pure electric vehicles can achieve zero fuel consumption, while hybrid vehicles can maintain a stable rate of 4 liters per 100 kilometers. In our daily lives, vehicle emissions directly impact air quality, making it crucial to advocate for energy-efficient driving. I always opt for high-efficiency models and maintain steady speeds while reducing unnecessary trips to keep fuel consumption within reasonable limits. Additionally, urban driving tends to have higher fuel consumption compared to highway driving, which is significantly influenced by road conditions and weather. In the long run, embracing new technologies like new energy vehicles is the shortcut to achieving ideal fuel efficiency—benefiting both the planet and your wallet. Never underestimate the significant impact of these small habits.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

What is the actual fuel consumption of the Peugeot 301 manual transmission?

The fuel consumption of the Peugeot 301 is: 6.3-6.5L/100km. Here are the details about the Peugeot 301: 1. Exterior: The Peugeot 301 features a sedan design with a body length of 4440mm and a wheelbase of 2650mm. The overall design is compact, and the rear styling is short and powerful. The trunk capacity is 506L. 2. Interior: The Peugeot 301 adopts a black interior design, with silver decorative strips on the dashboard and door panels adding a touch of vitality. The flat-bottom steering wheel and stylish center console bring a sense of driving excitement to the driver.
13
4
Share

What is the reason why the Languing cannot detect the smart key?

The Languing may not detect the smart key because the key's battery is dead. It is recommended to purchase a new battery according to the key battery model, then pry open the key shell and replace it yourself. The smart key will not suddenly run out of power. Before the key battery runs out, there will be some signs, such as the control distance becoming shorter, and the remote key can only be used when it is very close to the car. The body dimensions of the Languing are 4570mm in length, 1775mm in width, and 1445mm in height, with a wheelbase of 2700mm. In terms of interior, the multifunction buttons on the steering wheel of this car are quite rich, integrating audio, cruise control, Bluetooth phone and other buttons, which are integrated through arc design, not only adding some sporty elements, but also corresponding to the design of the center console. As the top model, this car is equipped with one-key start, ESP body stability system and ECO economic driving mode.
5
1
Share

Why Can't the Buick Regal Door Open?

The reasons why the car door cannot open are as follows: 1. Remote control failure: Mainly due to unresponsive buttons, low battery, environmental factors, strong signal interference or shielding, anti-theft system malfunction, or the need to re-match and encrypt the remote control. 2. Cold weather in winter causing the door to not open: In northern regions, winter temperatures are very low, often below freezing. After washing the car, residual water can accumulate in the door handle, lock, door frame gaps, etc. Overnight freezing turns this water into ice, firmly freezing the door shut, making it impossible to open in the morning. 3. Fault in the door lock mechanism itself: The likelihood of the door lock itself failing is very low and mostly occurs in older cars around 10 years old. No matter how high-end the car is, while the average person may not understand its working principle, the door lock structure is relatively simple, consisting mainly of the lock cylinder, lock block, central control motor, and operating mechanism.
4
5
Share

What is the only method for transferring a motorcycle license plate number?

To transfer the license plate of an already registered motorcycle, one must first obtain the "Second-hand Vehicle Transaction Invoice" and then proceed to the local vehicle management office to complete the transfer. Below is a detailed introduction to the motorcycle transfer process: 1. Required documents: Proof of origin of the motor vehicle; the whole vehicle factory certificate of conformity for domestically produced motor vehicles; proof of payment or tax exemption certificate for motor vehicle purchase tax. Proof of compulsory traffic accident liability insurance for motor vehicles; technical data file of the motor vehicle; "Motor Vehicle Registration, Transfer, Cancellation/Transfer Application Form," etc. 2. Proxy: If handled by an agent, the original and copy of the agent's identity proof must also be submitted (if the agent is a unit, the original and copy of the handler's identity proof must also be submitted), along with a written authorization from the owner of the motor vehicle.
8
5
Share

Will the BYD Han have a DM-i version?

BYD Han has a DM-i version. The following are the differences between BYD Han DM and DM-i: 1. Exterior: The DM-i and Han DM use the same design set, featuring a hexagonal front grille, but the DM-i version adopts a closed front face. Details such as headlights and taillights show minimal differences between the DM-i and the current DM version. The curb weight of the DM-i version is 1870kg. 2. Powertrain: The Han DM-i is equipped with a 1.5T Xiaoyun plug-in hybrid dedicated engine, which differs from the DM in terms of larger base displacement and thermal efficiency. According to BYD's layout for the DM-i system, there will be two versions in the future: a long-range version and a short-range version, with the long-range version supporting fast charging.
8
1
Share

Car AC Unable to Switch Airflow Direction?

Failure to switch air ducts in car AC systems may be caused by damage to the mode actuator motor inside the air ducts. It is necessary to inspect the blend door actuator and check whether the mode actuator motor is malfunctioning. Here is additional information: Structure: A typical system includes the AC compressor, condenser, condenser cooling fan, expansion valve, evaporator, blower motor, and related AC piping. Working Principle: The sealed system is filled with refrigerant, which circulates under the compressor's action. In the engine compartment's condenser, the refrigerant changes from gaseous to liquid state, releasing heat; while inside the vehicle cabin, it evaporates from liquid to gaseous state, absorbing heat, thereby lowering the interior temperature.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.