···
Log in / Register

What is the fuel consumption of Jetta?

1 Answers
EmilioDella
08/31/25 2:05am

Jetta's fuel consumption varies by model. The Jetta VS5 has a fuel consumption of 6.2-6.8L. Actual fuel consumption is influenced by various factors such as vehicle condition and road conditions, and may vary from car to car. The factors affecting a car's fuel consumption are as follows: Excessive carbon deposits: Carbon deposits have a significant impact on the vehicle, not only reducing engine power and increasing fuel consumption but also causing engine knocking, acceleration noise, and damage to pistons and crankshafts in severe cases. It is essential to clean carbon deposits promptly. Low tire pressure: Abnormal tire pressure can also affect fuel consumption. Low tire pressure increases the contact area between the tire and the ground, leading to more friction and naturally higher fuel consumption. It is recommended to check tire pressure frequently and keep it within the normal range. Dirty intake system: For example, a dirty air filter can also lead to increased fuel consumption. The air filter element should be replaced regularly. Alternatively, installing a high-flow air filter element can reduce the engine's intake resistance, which can also lower fuel consumption.

Was this review help?
16
3
Share
More Forum Discussions

What is a VVT Valve?

VVT stands for Variable-Valve-Timing, which refers to the variable valve timing system. This is a technology used in automotive piston engines. VVT technology can adjust the overlap time and timing of the engine's intake and exhaust systems, reducing fuel consumption and improving efficiency. Relevant information about automotive solenoid valves is as follows: 1. Introduction: Automotive solenoid valves are the actuating components of electronic control systems. According to their functions, they can be divided into shift solenoid valves, lock-up solenoid needle valves, and pressure-regulating solenoid needle valves. Based on their working modes, they are classified into on-off solenoid valves and pulse solenoid valves. 2. Function: Solenoid valves can work with different circuits to achieve the desired control, ensuring both precision and flexibility. There are many types of solenoid valves, each performing different roles in various parts of the control system. The most commonly used ones include check valves, safety valves, directional control valves, and speed regulating valves.
7
5
Share

Is It Normal to Have Water in the Spare Tire Compartment?

It is not normal to have water in the spare tire compartment, as it indicates a leakage issue in the vehicle. Here are the consequences of water ingress in a car: 1. Electronic system failure: Modern vehicles are equipped with numerous electronic devices, and unless they are specialized off-road vehicles, these electronic components are rarely waterproofed. Most cars lack proper waterproofing measures. 2. Engine failure: When exposed to rainwater, the vehicle's central computer and wiring are highly susceptible to short circuits. If these modules malfunction, the consequences can range from minor functional failures to severe vehicle damage, or even fire caused by short circuits, leading to unimaginable outcomes.
13
4
Share

How to Choose a Transmission?

When selecting a transmission, consider the following aspects: 1. Engine compatibility: The chosen transmission must match the engine's torque. The transmission should also align with the engine's installation dimensions. For engines of the same class, different manufacturers may design the front bearing position of the transmission input shaft differently, leading to variations in the input shaft length. 2. Vehicle usage: Determine whether the vehicle will primarily operate in mountainous or flat areas. For dump trucks or vehicles frequently used in mountainous regions, it is advisable to select a transmission without an overdrive gear and with a larger first gear ratio. This benefits both the engine and transmission lifespan. 3. Cab structure: Different vehicle models have varying cab structures, which require either remotely operated transmissions (connected via flexible cables) or directly operated transmissions.
18
0
Share

What are the Five Major Assemblies of Scrapped Vehicles?

The "five major assemblies" of a vehicle refer to the engine, steering wheel, transmission, front and rear axles, and frame. Below is an introduction to the management of scrapped motor vehicle recycling: 1. Dismantling enterprises are required to sell the "five major assemblies" only to qualified remanufacturing enterprises. 2. The department responsible for recycling and dismantling under the State Council shall establish a recycling information system. Recycling and dismantling enterprises must truthfully record various information such as the quantity, model, and flow direction of the "five major assemblies" and other major components, and upload it to the recycling information system. 3. Relevant departments will formulate supporting regulations to further specify the sale of the "five major assemblies," adding an additional institutional barrier to ensure safety.
5
0
Share

Does Blackened Transmission Fluid Need Replacement?

Blackened transmission fluid requires replacement. Here are common methods for replacing transmission fluid: 1. Gravity Drain: This is the most common and easiest method, but it cannot completely drain the transmission fluid. Residual fluid often remains in low spots and dead corners. 2. Machine Flush: New transmission fluid is added to a flushing machine, which connects to the transmission's fluid lines. The machine functions by pushing new fluid to flush out the old, ensuring a cleaner replacement. This method more thoroughly cleans the fluid passages. Signs of deteriorated transmission fluid include: 1. Jerking Issues: Vehicle shaking or gearshift jerking may indicate clogged valve bodies due to contaminated fluid. 2. Abnormal Noises: Caused by gear deformation or excessive sediment buildup in the oil pan.
11
5
Share

Should You Release the Clutch or the Brake First When Starting on a Slope?

After stopping on a slope, when starting again, you should first release the clutch to the semi-engaged state before starting to release the brake; otherwise, the vehicle will roll backward. The correct procedure for starting on a slope involves maintaining the proper driving posture, paying attention to various traffic conditions ahead, and avoiding looking down. Below is an introduction to the content of the Subject 3 driving test: 1. The road driving skills test for Subject 3 generally includes: preparation before starting, simulated lighting test, starting, driving straight, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and night driving. 2. The safe and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and knowledge of post-accident procedures.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.