What is the fuel consumption of Haojue Suzuki USR125?

2 Answers
DeAthena
09/05/25 8:20am
The fuel consumption of Haojue Suzuki USR125 is 2.1L/100KM. Below are the detailed explanations of motorcycle fuel consumption: 1. Average fuel consumption: There are noticeable differences in average fuel consumption among motorcycle engines of the same displacement, influenced by factors such as model, technology, road conditions, and driving skills. Generally, the comprehensive fuel consumption for a 125cc motorcycle is around 2L per 100 kilometers, 150cc around 2.3L, 200cc around 2.5L, and 250cc around 3L. 2. Variations in fuel consumption at different stages: During the break-in period, fuel consumption tends to be higher. If the motorcycle is frequently driven at high speeds during this period, the fuel consumption may also be relatively high. For motorcycles used over six years, due to wear and increased gaps, fuel consumption will also be higher.
Was this review help?
12
0
Share
MacIvan
09/17/25 8:29am
Last time I tested the fuel consumption on my USR125, I spent 40 yuan on 95-octane gas to ride 200 km, which works out to around 2.2 liters per 100 km. This figure is close to the official claimed 2.1L/100km, but it really depends on your riding style. In city traffic with frequent stops at red lights, it usually hovers between 2.3-2.5L/100km, while maintaining steady speed in suburban areas can bring it down to 2.0L. I know some modification enthusiasts who've tuned their transmission systems and achieved as low as 1.9L/100km, though I wouldn't recommend regular users to attempt such modifications. Important note: New bikes in the break-in period typically show about 0.3L/100km higher fuel consumption, which noticeably drops after the first service when synthetic oil is replaced. With its 7-liter fuel tank, you can reliably get 300 km per fill-up - perfect for 30 km daily commuters who only need to refuel weekly.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

How to Properly Press the Clutch for Reverse Parking?

Place the ball of your foot on the clutch pedal with your heel resting on the ground as a support point. When the clutch is fully depressed, keep your knee slightly bent. More relevant information is as follows: 1. Clutch Usage: Many people tend to stall the car during reverse parking, largely due to improper clutch operation. The clutch should be engaged slowly. Before shifting gears, fully depress the clutch with your left heel grounded as a support point, then gradually lift the ball of your foot. Experienced instructors suggest counting from 1 to 6—this timing ensures the clutch is fully released. 2. During the Reverse Parking Test: When stopping, first press the clutch, then immediately follow with the brake. Pressing the brake directly may cause stalling or jerking. When starting, release the brake first, then slowly release the clutch. This ensures smooth forward movement.
19
1
Share

Will Manually Closing an Electric Trunk Cause Damage?

Manually closing an electric trunk may potentially cause damage. This is because the opening and closing of an electric tailgate are controlled by motors or hydraulic rods. Frequently using excessive force to open or close it during remote electric operation can lead to malfunctions in the electric system components. While doing so occasionally once or twice is acceptable, habitual manual operation should be avoided. Precautions for using an electric trunk: 1. Before opening the electric tailgate: Ensure there are no obstructions such as objects, ceilings, or rear walls within the opening range to prevent scratches caused by unnoticed obstacles. 2. When the electric tailgate is fully closed: It will emit a "beep" alarm sound. Do not start the vehicle until you hear this confirmation to prevent accidents from an improperly secured tailgate. 3. If the electric tailgate malfunctions: Have it serviced at an authorized manufacturer's facility.
2
1
Share

What does the 'a' behind the electronic handbrake mean?

Electronic handbrake behind the a button is autohold, which is the automatic parking system. 1. After turning on the automatic parking system: When waiting for a red light, you do not need to shift into N gear or pull the handbrake, the car can stop steadily without rolling. When the red light turns green, stepping on the accelerator pedal will make the car move forward. This system is very suitable for urban roads with many traffic lights. 2. Autohold device: Most cars equipped with electronic handbrakes will also have the autohold device. The combination of these two systems is very convenient to use. Cars with electronic handbrakes have two handbrake motors on the rear wheels. After pressing the electronic handbrake button, the handbrake motors will clamp the brake pads, preventing the car from rolling.
18
2
Share

Is Car Chassis Rust a Serious Issue?

It has a significant impact. In minor cases, it affects ride comfort, while severe rusting increases the likelihood of vehicle malfunctions. If the chassis rusts, it's best to address and resolve the issue promptly. Benefits of chassis rustproofing: 1. Extends vehicle lifespan: Chassis rustproofing directly influences the longevity of the car. There are many reasons for chassis rust, such as moisture in the air or acid rain, which can corrode the chassis. Additionally, road gravel can also damage the car. Therefore, rustproofing the chassis provides better protection. 2. Flexible rustproofing options: There are various types of chassis rustproofing available, allowing for tailored choices based on different needs. This ensures better protection for the chassis, preventing scratches during driving. 3. Reduces interior noise: While driving, not only does gravel impact the chassis, but noise is also generated. Proper chassis rustproofing can reduce interior noise pollution, creating a more comfortable driving environment for the driver.
1
0
Share

What does annual vehicle inspection mean?

Annual vehicle inspection refers to the annual examination of vehicles that have obtained official license plates and registration certificates, conducted in accordance with the technical conditions for safe operation of motor vehicles. The purpose is to inspect the main technical conditions of the vehicle, encourage enhanced maintenance, ensure the vehicle remains in good condition, and guarantee driving safety. The inspection includes: 1. Checking whether the engine, chassis, body, and auxiliary equipment are clean, complete, and effective, and whether the paint surface is uniform and aesthetically pleasing; 2. Testing whether the vehicle's braking performance, steering control, lighting, and exhaust meet the requirements; 3. Verifying whether the vehicle has been modified, altered, or reconstructed, and whether the registration details on the driving license, license plate, and vehicle records match the actual condition of the vehicle.
13
1
Share

What is the violation code 10170?

Violation code 10170 refers to the failure to insure a motor vehicle with compulsory third-party liability insurance as required. This will result in a fine and vehicle impoundment. Below is extended information about violation codes: 1. Definition: Traffic violation codes consist of four digits, classified according to the principles in the traffic law. The sequence from left to right is: one-digit behavior classification code, one-digit penalty point classification code, and two-digit sequential code. 2. First digit code: Behavior classification code, indicating the category of the violation in the Road Traffic Safety Law. 3. Second digit code: Penalty point classification code, indicating the category of penalty points for the traffic violation. 4. Third and fourth digit codes: Sequential code, indicating the order of violations within the same behavior classification.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.