What is the fuel consumption of Dongfeng Mengshi?

1 Answers
McJourney
07/30/25 4:16am
The average fuel consumption of Dongfeng Mengshi is 11.3L per 100 kilometers. The specific fuel consumption standard should be based on actual usage, as fuel consumption is related to various factors such as load, hill climbing, air conditioning usage, low tire pressure, etc. This model is equipped with a 6.5-ton engine, which results in relatively high fuel consumption. Common causes of high fuel consumption and their solutions are as follows: 1. Strengthen vehicle maintenance. Vehicle adjustment and maintenance affect engine performance and driving resistance. Statistics show that poor maintenance can increase fuel consumption by 10% to 20%. Owners should regularly take their vehicles to repair shops for routine maintenance, such as checking tire pressure, wheel alignment, adjusting brake pad and drum clearance, lubricating chassis points, timely oil changes, and filter inspections. 2. Every vehicle has its economic speed, and maintaining a speed close to this range is the most fuel-efficient. Generally, for sedans, the most fuel-efficient speed is between 70 to 90 kilometers per hour (varies by model). At high speeds, the vehicle's resistance increases significantly (mainly due to air resistance). 3. Correct refueling. Using higher-grade fuel is not necessarily better for the car. When the fuel grade is too high or too low, it can lead to incomplete combustion, resulting in higher fuel consumption and even unstable engine operation. In severe cases, it may damage the engine and other critical components.
Was this review help?
1
4
Share
More Forum Discussions

What to Do When the F3 Central Locking System Doesn't Respond?

Here are the solutions for when the central locking system of a BYD F3 doesn't respond: 1. First, check if the fuse is blown, as this is the most likely issue. 2. If the fuse is fine, there could be several other causes, such as a faulty main control switch, a defective main control lock block, or wiring problems. It is essential to contact a 4S shop or a professional auto repair shop as soon as possible to have the issue resolved by experts. Below are the impacts of a malfunctioning central locking system: 1. Inability to use the vehicle's anti-theft function normally; 2. Failure of the anti-theft system; 3. Vehicle theft due to the inability to lock the doors properly.
4
4
Share

Is the Lynk & Co 03+ Fuel-Efficient?

Compared to models in the same class, the Lynk & Co 03 is not particularly fuel-efficient. Here are the relevant details: 1. Equipped with a 1.5T 180hp L3 engine paired with a 7-speed dual-clutch transmission, the average fuel consumption is 8.53L/100km, with a range of 7.37~9.68L/100km. 2. Equipped with a 1.5T 180hp L3 engine (engine model H-3G15TD) paired with a 7-speed dual-clutch transmission, the average fuel consumption is 8.33L/100km, with a range of 7.25~9.41L/100km. 3. Equipped with a 2.0T 190hp L4 engine paired with a 6-speed automatic transmission, the average fuel consumption is 8.62L/100km, with a range of 7.55~9.69L/100km.
10
0
Share

What does automatic parking mean?

"Automatic parking" refers to the automatic parking system that can autonomously perform steering movements during parking. The driver only needs to control the throttle, brake, and gear shifting, and the system can take over the steering wheel at any time to stop the system function. The following is an introduction to the automatic parking system: 1. Definition: The Electronic Control Unit (ECU) performs real-time environmental modeling based on sensor information, generates vehicle movement paths, and controls the vehicle to automatically move to the parking space without collision. 2. Usage method: The automatic parking assist system has several radar probes on the side of the car body that are not commonly seen in other models. These two radar probes use ultrasonic sensors to scan both sides of the road, automatically finding a suitable parking space by comparing the parking space and the vehicle length. Once a suitable position is found, the driver only needs to shift into reverse gear and use the brake to control the speed. The vehicle will automatically adjust the steering and park itself into the space. When it detects that the distance between obstacles in front and behind the car body exceeds 1.5m, it can easily perform automatic parking without any adjustment of the car body. The minimum spacing required for its operation is 40cm, which is also the minimum spacing generally required for manual parking.
12
0
Share

What is the function of damping sheets?

Here is a detailed introduction to the functions of damping sheets: 1. Damping sheets can reduce the resonance amplitude of mechanical structures. They help prevent structural damage caused by dynamic forces reaching their limits. 2. Damping sheets provide stabilization. After a mechanical system experiences instantaneous impact, damping sheets assist in restoring it to a stable state. 3. Damping sheets can reduce mechanical noise. They decrease sound radiation caused by mechanical vibrations, thereby lowering mechanical noise. 4. Damping sheets offer seismic resistance and dynamic stability. They provide high seismic resistance and dynamic stability for various precision instruments, thereby improving the processing accuracy, measurement accuracy, and operational precision of machine tools, instruments, etc.
17
5
Share

Why does the new Santana dual-fuel vehicle suddenly fail to run on gas?

Dual-fuel vehicle cannot run on gas, possibly due to low gas pressure, and the power when running on gas is not as strong as when running on gasoline. Introduction to dual-fuel vehicles: Equipped with two sets of fuel supply systems, one supplying natural gas and the other supplying liquefied petroleum gas. The two fuel supply systems deliver fuel to the combustion chamber according to a predetermined ratio, where the fuels mix and burn inside the cylinder. Advantages of dual-fuel vehicles: Stable combustion without knocking, and easy cold and hot starts. The storage, transportation, decompression, and combustion of compressed natural gas are carried out under strict sealing conditions, making leakage unlikely. Additionally, the gas cylinders undergo various special destructive tests, ensuring safety and reliability. Compressed natural gas burns safely, produces less carbon deposits, reduces vapor lock and knocking, which helps extend the service life of various engine components, reduces the frequency of maintenance, and significantly lowers maintenance costs. It can also reduce the engine's oil consumption. Compared to gasoline, using compressed natural gas can significantly reduce emissions of carbon monoxide, sulfur dioxide, carbon dioxide, etc.
2
2
Share

What to Do If the Mitsubishi ASX Has High Fuel Consumption?

Here are some solutions for high fuel consumption in the Mitsubishi ASX: 1. Regularly clean the air filter to ensure the engine breathes fresh air and maintains smooth airflow in the intake system. 2. Periodically inspect and replace spark plugs in the ignition system, as a strong spark is essential for complete combustion of the air-fuel mixture. 3. The fuel system should also be cleaned regularly, as carbon buildup on the fuel injectors can cause needle valve leakage, leading to fuel wastage. 4. The engine should undergo periodic carbon deposit cleaning, as excessive buildup can disrupt accurate fuel control and increase fuel consumption.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.