What is the fuel consumption of Dongfeng Lingzhi M5?

2 Answers
Cody
08/30/25 3:33am
Dongfeng Lingzhi M5 has an average fuel consumption of around 8.5 liters per 100 kilometers. The following are factors that affect fuel consumption: Insufficient tire pressure and tire wear: Insufficient or low tire pressure increases friction between the tires and the ground, leading to greater resistance and higher fuel consumption. Severe tire wear can cause frequent skidding, which also increases fuel consumption. Fuel quality and carbon deposits: Poor-quality gasoline can lead to increased carbon deposits. Excessive carbon deposits make the intake pipe walls rough, affecting the intake efficiency and the quality of the air-fuel mixture, causing a sharp rise in fuel consumption. Therefore, fuel quality cannot be ignored, and it is essential to clean carbon deposits every six months. Aggressive driving habits such as rapid acceleration and flooring the throttle at startup can significantly increase fuel consumption. Therefore, maintaining good driving habits is a crucial factor in preventing high fuel consumption.
Was this review help?
9
3
Share
LeElaina
09/11/25 7:37am
I've been driving the Dongfeng Lingzhi M5 for two years, mainly for long-distance freight. This car is indeed quite fuel-efficient on highways, with my actual test showing 7.9L/100km, but in the city it quickly rises to 11L. On average, the dashboard shows around 9.5L, and when carrying more cargo, it adds another liter. Using 95-octane gasoline allows me to drive dozens of kilometers more than with 92-octane, and maintaining tire pressure at 2.5 is more fuel-efficient than at 2.2. Recently, with rising fuel prices, the cost per kilometer has exceeded 0.5 yuan, slightly higher than my friend's Wuling Hongguang, but the larger cargo space makes it worth it. I recommend installing a fuel consumption monitoring APP for those who frequently drive long distances, as it helps adjust driving habits in real time.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

Is Car Window Tinting Necessary?

Car window tinting is a non-essential accessory. Here are the specific pros and cons of car window tinting: 1. Good privacy protection. Most car window films are one-way, which can protect the owner's privacy, but requires careful selection. 2. Explosion-proof function. In case of an accident, the tinted glass will remain stuck together when shattered, preventing glass fragments from scattering, thus protecting passengers. 3. Thermal insulation. High-quality car window films can provide thermal insulation effects. In summer, they can effectively control the rise of interior temperature, while in winter, they can suppress heat dissipation, maintaining a comfortable driving environment. 4. Reduced light transmittance. The light transmittance of car window films does not exceed 90%, especially when applied to the windshield. Reduced light transmittance may compromise driving safety.
2
0
Share

What Documents Are Needed for New Vehicle Inspection?

Here are the specific materials required for new vehicle inspection: 1. Fill out the "Motor Vehicle Inspection Record Form". For private vehicles, in addition to the owner's signature, a copy of the owner's ID card must be attached. For company vehicles, a copy of the enterprise code certificate must be attached, and the "Power of Attorney" must be filled out and stamped with the official seal. 2. The vehicle identification number (VIN) rubbing paper should be pasted in the corresponding position on the "Motor Vehicle Inspection Record Form". 3. Vehicle license (both original and duplicate pages). 4. Compulsory traffic accident liability insurance policy (duplicate). 5. Self-repaired vehicles or those repaired by a repair shop need to be stamped on the inspection form (exempted for the first and second annual inspections of new vehicles). 6. Motor vehicle safety technical inspection certificate. 7. Light gasoline vehicles need to provide a tail gas inspection qualified report using the steady-state working condition method.
1
5
Share

When Should Spark Plugs Be Replaced in a Car?

A car's spark plugs should be replaced under the following circumstances: difficulty starting, reduced power, excessive exhaust emissions, or increased fuel consumption. Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers, but this may vary depending on the brand and engine type. It is recommended to follow the vehicle's manual. The following standards can be used as a reference for maintenance replacement: platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, and remove the high-voltage ignition wires, marking each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one, ensuring that any external debris such as leaves or dust is cleaned off before proceeding. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to fully tighten it. Reinstall the high-voltage ignition wires in the correct firing order and secure the cover back in place.
4
4
Share

How to Use Headlights When Driving at Night?

Here are the specific methods for using headlights during night driving: 1. Under normal circumstances, only the low beam is necessary when driving at night, and turn signals should be used when turning. Urban roads are well-lit, so there is no need to use high beams unless there is insufficient lighting. 2. When encountering oncoming traffic, if you are using low beams, no adjustment is needed. If high beams were previously on, they should be switched to low beams in advance. Otherwise, high beams can prevent the oncoming driver from accurately judging your vehicle's width, potentially causing an accident. After passing the oncoming vehicle, decide whether to switch back to high beams based on road conditions. 3. When driving straight through an intersection at night, use low beams. At uncontrolled intersections, slow down and alternately flash high and low beams as a signal. 4. When overtaking, first activate the turn signal, then honk and quickly alternate between high and low beams to alert the vehicle ahead. After confirming that the vehicle ahead has no intention of changing lanes, proceed with the overtaking maneuver swiftly. Avoid driving side by side for an extended period. Once the overtaking is complete and sufficient distance from the overtaken vehicle is achieved, use the turn signal to merge back into the original lane.
8
1
Share

Why does the dash cam only record for a few minutes before stopping?

If the dash cam stops recording after just a few minutes, it might be due to the recording time settings. Here are the specific details about dash cams: 1. The loop recording settings for dash cams usually offer different time options such as 1 minute, 2 minutes, 3 minutes, 5 minutes, or 10 minutes. Once a segment is recorded, it moves on to the next. 2. When setting the loop recording time, avoid choosing a duration that is too short or too long. If the recording time is too short, the video will be split into more segments, increasing the chance of dropped frames. Conversely, if the time is too long, fewer videos will be stored, and they will be overwritten quickly. It is recommended to set the recording time to 3 or 5 minutes for optimal performance. 3. A dash cam is a device that records images, sounds, and other relevant information during vehicle travel. Once installed, it can capture the entire driving process in video and audio, providing evidence in case of traffic accidents.
16
3
Share

Can Winter Tires Be Used in Summer?

Winter tires can be used in summer. Here are the specific details about winter tires: 1. Winter tires are designed to provide friction in low-temperature environments. They are very soft, maintaining sufficient grip on snow and offering good noise reduction. However, their structure is not intended for summer use, as they have poor heat dissipation and are more prone to blowouts. 2. The soft structure of winter tires, optimized for snowy conditions, wears out quickly on summer roads and performs poorly in terms of water drainage. 3. Winter tires are generally suitable for temperatures below 7 degrees Celsius. In regions with consistently high temperatures, using them year-round may be acceptable. Based on the usage environment, if temperature variations are minimal, all-season tires may be a better option.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.