What is the fuel consumption of Dongfeng Fengxing Lingzhi?

How to Open the Front Hood of the Edge?

There is a handle below the driver's side A-pillar with an icon indicating "Open the engine compartment hood." Pull it firmly, and you will hear a "pop" sound as the engine compartment hood lifts slightly. Slightly raise the hood, and at the front end inside the hood, there is a hidden switch. Push it to the left to fully open the hood. Functions of the front hood: 1. Airflow guidance. For objects moving at high speed in the air, the air resistance and turbulence generated around the moving object directly affect its trajectory and speed. The shape of the hood can effectively adjust the direction of airflow relative to the car's movement and the resistance it generates, reducing the impact of airflow on the car. Through guidance, air resistance can be decomposed into beneficial forces, increasing the tire's grip on the ground, which enhances driving stability. The streamlined design of the hood is largely based on this principle. 2. Protection of the engine and surrounding components. Under the hood are critical parts of the car, including the engine, electrical circuits, oil lines, braking system, and transmission system, all of which are vital to the vehicle. By enhancing the strength and construction of the hood, it can effectively prevent adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle's normal operation. 3. Assisting driver visibility. During driving, the driver's view and the reflection of natural light are crucial for correctly judging road conditions and obstacles ahead. The shape of the hood can effectively adjust the direction and form of reflected light, reducing the impact of light on the driver. 4. Preventing accidents. The engine operates in a high-temperature, high-pressure, and flammable environment, where overheating or accidental damage to components can lead to explosions, fires, or leaks. The hood can effectively block damage caused by explosions, acting as a protective shield. It also helps to isolate air and prevent the spread of flames, reducing the risk and extent of fire damage.

3

4

Share

Why does the car shake when driving?

The most common causes of car shaking are a dirty throttle body or excessive carbon buildup in the fuel injectors. Here is relevant information: 1. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold-start injector will be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. 2. In this situation, the engine will only start easily once the carbon deposits have absorbed enough gasoline to become saturated. After starting, the gasoline adsorbed on the carbon deposits will be drawn into the cylinders by the engine's vacuum suction and burned, making the air-fuel mixture too rich. The combustible mixture in the engine alternates between being too lean and too rich, causing idle shaking after a cold start. 3. Additionally, for an engine to start, three essential and indispensable factors are required: fuel, air, and spark. If any of these three factors is obstructed or not functioning smoothly, the engine's operation will become unstable, and shaking will occur as a result.

2

1

Share

How long does it take to study for the driving test subject one?

Getting a driver's license generally takes about 3 months. Here are some considerations for learning to drive: 1. In terms of learning, each instructor has their own personality and teaching methods. Don't underestimate the instructor, as they have accumulated a wealth of experience in the driving test industry. They might be strict at times, but it's all for the sake of helping students pass the test. 2. In terms of choice, the prices of driving schools vary, as each school sets its prices based on its own training standards. 3. Whether you're learning to drive or getting your license to drive on the road, you must be very careful and strictly follow the instructor's instructions.

19

1

Share

What is the ground clearance of the new Bora?

The minimum ground clearance of the new Bora when fully loaded is approximately 122mm. The greater the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground. Below is some information about minimum ground clearance: 1. Minimum ground clearance refers to the distance between the lowest protruding part of the vehicle's chassis and the level ground when the vehicle is fully loaded, reflecting the vehicle's ability to pass over obstacles or uneven ground without collision. 2. The greater the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher the center of gravity, which reduces stability. 3. The smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower the center of gravity, which can increase stability.

11

3

Share

How to Set the Car Remote Control Lock Sound?

Depending on the car model, some models cannot adjust the sound volume when locking with the remote key, while others can set the sound to silent mode. The method to set the car remote key sound is as follows: 1. If the remote key has four buttons, there is usually an additional silent mode button. Pressing it will result in only the hazard lights flashing when locking the car, without the horn sound. 2. If the remote key has three buttons, you can try pressing the lock button. After the car beeps once, simultaneously hold down the unlock and lock buttons. The car will beep again, then press the unlock button, and the car will enter silent mode with only the hazard lights flashing and no horn sound.

12

4

Share

What Causes Car Gear Grinding?

The following are the reasons that cause car gear grinding: 1. Forcing the gear into place without depressing the clutch, or forcing the gear out without depressing the clutch. 2. Completely releasing the clutch before the gear shifting is completed, which will result in a gear grinding noise. 3. Try to avoid this as much as possible, as it will wear out the gears. 4. Clutch failure, which is a mechanical failure of the clutch that prevents it from disengaging properly, causing the gears to make a rattling noise. 5. Operational reasons, which means the clutch is not used correctly. In this case, attempting to engage the gear will result in a clicking noise and failure to engage. Shifting gears under these conditions can cause damage to the transmission.

9

0

Share

What is the fuel consumption of Dongfeng Fengxing Lingzhi?

How to Open the Front Hood of the Edge?

Why does the car shake when driving?

How long does it take to study for the driving test subject one?

What is the ground clearance of the new Bora?

How to Set the Car Remote Control Lock Sound?

What Causes Car Gear Grinding?

When was China III introduced?

What Causes the Steering Wheel to Make Noise When Turning?

Which gear is used for reversing?

Is Coolant the Same as Antifreeze?