What is the fuel consumption of Civic per 100 kilometers?

Is the engine of the Jetour X70 made of cast iron or aluminum alloy?

The engine of the Jetour X70 is made of aluminum alloy, and the entire series is equipped with a 1.5T turbocharged engine. Taking the 2021 Jetour X70 as an example, it belongs to a midsize SUV with body dimensions of 4720mm in length, 1900mm in width, and 1710mm in height, a wheelbase of 2745mm, and a fuel tank capacity of 55L. The 2021 Jetour X70 features a front MacPherson independent suspension and a rear multi-link independent suspension, with a maximum horsepower of 156PS, a maximum power of 115kW, a maximum torque of 230Nm, and is paired with a 6-speed manual transmission.

8

0

Share

What does VSS fault mean?

1. Meaning of VSS fault: VSS stands for Vehicle Speed Sensor. A VSS fault indicates that the vehicle speed information cannot be transmitted to the instrument cluster via the CAN bus, meaning the speed data is missing or invalid, which may result in the speedometer not displaying the vehicle speed. 2. Principle: The vehicle speed information is transmitted to the instrument cluster through the CAN bus and displayed on the speedometer in either m.p.h (miles per hour) or km/h (kilometers per hour). If this information is missing or invalid, the speedometer will automatically reset to zero. If the tires are changed to non-original sizes, the programming of the Powertrain Control Module (PCM) needs to be updated, which can also be done using a diagnostic tool.

18

5

Share

Is stopping within 50 cm considered early or late?

There is no concept of stopping too early or too late; stopping within 50 cm on the slope is within the required range. Below is relevant information about the Subject 2 driving test: 1. Hill start and designated parking: During hill start and designated parking, when the vehicle stops on the slope, the handbrake is engaged to prevent rolling back. The process of accelerating and passing the slope from this stationary position constitutes the hill start test. 2. Reverse parking: Reverse parking is one of the most practiced and commonly considered challenging tasks in Subject 2. The most crucial aspect during this test is not stopping midway - if the vehicle stops, the test is considered failed.

12

3

Share

How to Identify the National Emission Standard on the Vehicle License?

To identify the national emission standard on the vehicle license, check the vehicle model number: if it starts with 'bh', the suffix 'w' or 'x' indicates China III emission standard, 'y' indicates China IV, 'v' indicates China V, and 'vi' indicates China VI. Other methods to check the vehicle's emission standard include: 1. Review the motor vehicle conformity certificate; 2. Check the vehicle's accompanying documents for the emission standard in the vehicle information section; 3. Check the conformity certificate; 4. Visit the official motor vehicle environmental protection website for inquiries; 5. Inspect the vehicle's environmental protection label. The 'National' emission standards refer to China's phased vehicle emission standards, from China I to China VI, marked by the symbols i, ii, iii, iv, v, and vi respectively.

14

4

Share

Is the transmission of the new Passat 330 Elite dry or wet?

The transmission of the new Passat 330 Elite is wet. The Volkswagen new Passat uses a dual-clutch transmission, with the 1.4T model equipped with a dry transmission and the 1.8T/2.0T models with a wet transmission. The wet type is relatively more stable. The latest National VI 2.0T engine (330TSI or 380TSI) is paired with the DQ381 wet dual-clutch transmission, while the 1.4T (280TSI) is paired with the DQ200 dry dual-clutch transmission. Advantages and disadvantages of wet and dry dual-clutch transmissions: 1. Wet dual-clutch transmission refers to a dual-clutch system consisting of two sets of multi-plate clutches, one large and one small, coaxially installed together in a sealed oil chamber filled with hydraulic fluid. Therefore, the wet clutch structure offers better adjustment capability and excellent thermal performance, enabling it to transmit larger torque. This technology is stable and mature, not only achieving fast and smooth gear shifts but also preventing overheating at low speeds due to the cooling effect of the oil. However, the downside is that the wet dual-clutch structure is complex, relatively larger and heavier, with higher manufacturing costs compared to dry dual-clutch transmissions. Additionally, maintenance is more time-consuming and labor-intensive, requiring regular coolant replacement. 2. Dry dual-clutch transmission transmits torque through friction plates on the driven disc of the clutch. By eliminating the related hydraulic systems and leveraging the high efficiency of dry clutches in torque transmission, dry systems consume less energy during gear shifts compared to wet systems, significantly improving fuel economy. Moreover, dry dual-clutch transmissions are lighter than wet ones. The disadvantage is that dry dual-clutch transmissions have relatively inferior heat dissipation and lower torque capacity. However, due to lower manufacturing costs and subsequent maintenance expenses, they are generally used in budget-friendly models.

4

5

Share

What is the normal RPM when starting a car?

The normal RPM when starting a car is between 1000 and 1400 RPM. Different car models may have varying cold-start RPM values due to differences in engine specifications. Car RPM refers to the rotational speed of the car engine, and its functions include: 1. Reflecting the engine's operating condition in real-time; 2. Helping drivers better coordinate with transmission gears and throttle positions; 3. Maintaining the car in optimal working condition; 4. Reducing consumption and extending engine lifespan. The reasons for high RPM when starting a car include: 1. Sudden increase in throttle opening; 2. Fuel injector dripping or clogging; 3. Slippage or damage to the air conditioning clutch; 4. Air intake system leakage; 5. Insufficient engine output power. Solutions for high RPM when starting a car include: 1. Adjusting the throttle opening; 2. Replacing the fuel injector, air conditioning clutch, air intake system, or engine.

18

1

Share

What is the fuel consumption of Civic per 100 kilometers?

Is the engine of the Jetour X70 made of cast iron or aluminum alloy?

What does VSS fault mean?

Is stopping within 50 cm considered early or late?

How to Identify the National Emission Standard on the Vehicle License?

Is the transmission of the new Passat 330 Elite dry or wet?

What is the normal RPM when starting a car?

How to Use the M Gear in an Automatic Transmission Car?

How to open the Volkswagen CC's sensor-activated trunk?

How to reset the maintenance light on Jiangling Transit?

How to Remove Rear Window Tint Film?