What is the fuel consumption of BYD Qin?

1 Answers
WyattRose
07/29/25 12:28pm
Overall, the fuel consumption of BYD Qin hybrid in economic mode is approximately 6L/100km. In electric mode, the range with a full charge is about 40+ KM. Definition of fuel consumption: Fuel consumption refers to the amount of fuel consumed corresponding to the distance traveled by a car. The constant-speed fuel consumption is a fuel economy indicator when the car is driving at a constant speed on a good road. The commonly mentioned "several liters per 100 kilometers" means how many liters of fuel a car needs to consume for every 100 kilometers traveled. Here, "several" is equivalent to "L" (liters). Factors affecting fuel consumption: The level of car fuel consumption is related to many factors, including driving environment and driving habits, such as prolonged engine idling, emergency braking, fluctuating driving speeds, insufficient tire pressure, aggressive driving, and long-distance driving at high speeds in low gears. In addition, road conditions also have a significant impact on fuel consumption, especially in urban traffic conditions where traffic jams are common.
Was this review help?
10
1
Share
More Forum Discussions

Can you change lanes on a solid white line?

You cannot change lanes on a solid white line. Crossing a solid white line to change lanes is generally penalized as an illegal lane change, resulting in a fine and a deduction of 3 points. If an accident occurs due to crossing the white line to change lanes, the driver bears primary responsibility. Situations where crossing a solid white line is allowed: when the vehicle ahead breaks down and turns on hazard lights, causing congestion behind, and if traffic remains stalled for an extended period, vehicles may cross the solid white line to change lanes, provided it is safe to do so. If this situation is captured by traffic cameras and results in a violation notice, the penalty can be appealed through administrative reconsideration. For penalties that cannot be dismissed, it is generally recommended that drivers install a dashcam or use their phone's recording function to gather evidence, as this can strengthen their case when appealing the penalty.
10
4
Share

How to Check License Plate Progress via 11183?

Methods to check license plate progress via 11183: 1. Call the 11183 hotline, connect to customer service, provide your license plate number or application number to inquire about mailing status; 2. Register and log in to the Traffic Management 12123 APP, where you can track the progress under "Online Application Status". Once the plate is produced and shipped, logistics details become available. If a mobile number is linked, SMS notifications will be sent upon shipment. Plates are delivered via China Post Express, with some regions using EMS. As these services are generally slower, owners should allow 15-20 days for delivery.
13
1
Share

Can Traffic Violations Be Handled Without the Vehicle Owner's ID Card?

Traffic violations can be handled without the vehicle owner's ID card. The driver only needs to prepare the following documents: 1. The original vehicle registration certificate of the violating vehicle; 2. The original ID card of the person receiving the penalty points; 3. The original driver's license of the person receiving the penalty points; 4. The person receiving the penalty points must be present in person. Article 18 of the Traffic Violation Handling Procedures stipulates that if a party is fined, they must be informed to pay the fine at a designated collection agency within 15 days from the date of receiving the penalty notice. If the driver is not the vehicle owner, the owner's ID card is not required; only the driver's ID card and driver's license are needed. Traffic police generally check violations in two ways: first, on-site enforcement by traffic police; second, electronic monitoring devices such as cameras recording violations.
3
3
Share

What vehicles can an A3 driver's license drive?

A3 driver's license allows driving urban buses, specifically city public buses with a capacity of 10 or more passengers, but it is not limited to buses only. According to relevant regulations, holders of an A3 license can also drive vehicles permitted under the C1 license category, such as small cars, small automatic transmission vehicles, low-speed trucks, and three-wheeled vehicles. Requirements for obtaining an A3 driver's license: 1. Age between 21 and 50 years old; 2. Height above 155 cm, naked or corrected vision reaching 5.0 or above, no red-green color blindness, and the ability to distinguish the direction of sound sources with each ear hearing a tuning fork at 50 cm; 3. Both thumbs must be intact, and each hand must have three other fingers intact and functioning normally; 4. Normal movement of the torso and neck, normal lower limb movement with a length difference between the two lower limbs not exceeding 5 cm.
6
2
Share

What Causes Transmission Vibration?

Reasons for transmission vibration: 1. The clutch is the only power transmission component between the engine and the transmission. If the car's clutch is damaged, the transmission will vibrate; 2. The working principle of the transmission is to achieve power changes through the combination of gears of different sizes. As long as the car is moving, the gears are always in a state of high-speed operation. If the transmission gears are worn or damaged, the transmission will vibrate; 3. Deterioration of the transmission fluid can also cause transmission vibration. Transmission fluid serves functions such as lubrication, cleaning, heat dissipation, anti-corrosion, and rust prevention. Prolonged use can lead to deterioration or oxidation of the transmission fluid. Abnormal operation of the transmission fluid will cause the transmission to vibrate.
15
1
Share

What is the difference between a spare tire and a regular tire?

The difference between a spare tire and a regular tire lies in the air pressure: the suitable air pressure for a spare tire is between 2.3 to 2.5 bar; the air pressure for a standard regular tire is between 2.4 to 2.5 bar, while for reinforced tires, it ranges from 2.8 to 2.9 bar, with the maximum pressure not exceeding 3.5 bar. Most car manufacturers produce spare tires that are slightly smaller in size compared to regular tires, as this helps reduce production costs. Spare tires are stored in the trunk for long periods, leading to significant rubber aging, which can cause skidding during sudden braking due to varying wear levels. The principle for replacing tires is that tires on the same axle must be of the same brand, tread pattern, size, load index, speed rating, and have similar tread depth, all for the sake of safe driving.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.