What is the fuel consumption of a used Roewe 750s-1.8t?

What are the tips for pulling over in automatic transmission Subject 3?

When pulling the vehicle over to the side, drive slowly with the car body parallel to the side line, and use the right rearview mirror to judge the distance between the car body and the side line. When the distance is less than 30 centimeters, stop the vehicle by the roadside. The following is the relevant introduction to the Subject 3 test: 1. After the vehicle is completely parked, if the distance between the side of the vehicle and the side line is more than 30 centimeters: 10 points will be deducted in the test. If no points are deducted in the previous test items, it will not affect the final test result, and the test will be judged as successful; 2. If the vehicle directly presses on the solid line at the side of the road when parking: 100 points will be deducted, directly resulting in test failure.

9

4

Share

Can a truck tire with a bulge still be used normally?

A truck tire with a bulge cannot be used normally. Here are the details regarding truck tire bulges: 1. Cause: When a truck is driven, the tire may suffer an impact, leading to a bulge. The internal air pressure of the impacted tire increases, causing the weaker sidewall to bulge outward. If the force within this bulge stretches and breaks the tire's internal cord layers, a more noticeable bulge will appear. 2. Hazard: Once a tire develops a bulge, it is prone to a blowout. The rubber at the bulged area is very thin, and continued use may lead to air leakage or a blowout. In case of a blowout, avoid slamming on the brakes.

7

5

Share

Does the Kia Sportage still experience cylinder scoring issues?

From the perspective of complaints, the cylinder scoring issue with the Kia Sportage engine has not been properly resolved. Here is more information about the Kia Sportage: 1. Vehicle Features: The Kia Sportage boasts a stylish and attractive exterior with a muscular design; it features a brand-new avant-garde design style. The dashboard is simple and elegant with user-friendly controls, and the sporty cannon-style instrument cluster adds to its dynamic appeal. The overall craftsmanship is good, but the pricing is relatively high, resulting in low cost-performance, and the fuel consumption is also on the higher side. 2. Vehicle Positioning: The Sportage perfectly blends business with leisure, and urban with off-road capabilities. It not only further enriches the company's product lineup but also fills the gap in the domestic new-concept urban SUV market.

20

0

Share

What does 'seek' mean on a car?

The 'seek' button in a car is used to switch radio channels, which was relatively common in some older car models. Newer cars are not equipped with radios; instead, they feature fully functional infotainment systems with large screens, and most of these systems are internet-connected. With the advancement of technology, the multimedia entertainment systems in cars have also evolved, making vehicles increasingly intelligent. Drivers can now not only listen to music by playing CDs but also connect via Bluetooth by simply turning on the car's Bluetooth and pairing it with their phones, making the operation very convenient. Additionally, drivers can use USB drives or AUX audio cables to play music.

12

2

Share

How to Resolve U0140 Loss of Communication with Body Control Module?

Solution for U0140 loss of communication with body control module: It is necessary to check whether the computer board connector is oxidized and whether the throttle pedal connector has poor contact. Use the elimination method to resolve this fault. After troubleshooting, the fault code needs to be cleared. Below is additional information: 1. Introduction to the vehicle fault self-diagnosis system: Generally, vehicles equipped with microprocessor control units have a fault self-diagnosis system. It can be used to automatically check and monitor the working status of various parts of the vehicle's transmission system and control system. When a fault occurs in the vehicle, the fault indicator light on the dashboard will flash to warn the owner that there may be a problem. Pressing a button will display the fault code on the dashboard. At the same time, this fault signal will be stored in the memory. Even if the ignition switch is turned off, the fault is resolved, and the fault indicator light goes out, the fault signal will remain in the memory for maintenance personnel to determine the location of the vehicle's fault. After troubleshooting, disconnecting the ECU power for 30 seconds will clear the fault code. 2. Function: Detecting faults. The level signal input to the microprocessor has a certain range under normal conditions. If a signal outside this range is input, the ECU will diagnose that the signal system is in an abnormal state. For example, the engine coolant temperature signal system stipulates that under normal conditions, the sensor voltage is 0.08-4.8V. Any value outside this range will be diagnosed as abnormal. Fault classification: When the microcomputer is working normally, it detects abnormal input signals through diagnostic programs, and then classifies the detection results into minor faults that do not cause obstacles, faults that cause functional degradation, and major faults. The faults are classified by importance and pre-programmed. When the microcomputer itself fails, major faults are classified through WDT.

5

2

Share

Is it a big deal if car tires are submerged in water for a day?

Tires being submerged in water is not a problem, and even long-term immersion will not have any significant impact. However, compared to the effects of long-term water immersion on tires, the impact of standing water on wheel hubs and brake components (such as brake calipers, brake pumps, and brake discs) is much more severe. It's important to remember that tires themselves are made of rubber, making them virtually "immune" to water damage. Here are some additional solutions for dealing with rust on car parts after water immersion: 1. If rust does occur, it's not the end of the world—simply use fine sandpaper to polish it off. 2. However, if the corrosion is very severe, timely replacement is necessary. Even if you manage to sand off the rusted surface as much as possible, it can still affect braking performance (such as causing steering wheel vibration during braking or producing unusual noises). 3. Unlike tires, wheel hubs and brake components are made of metal and can undergo oxidation reactions with standing water. Over time, this can lead to corrosion (rusting) of the metal parts, significantly impacting the car's braking performance.

10

0

Share

What is the fuel consumption of a used Roewe 750s-1.8t?

What are the tips for pulling over in automatic transmission Subject 3?

Can a truck tire with a bulge still be used normally?

Does the Kia Sportage still experience cylinder scoring issues?

What does 'seek' mean on a car?

How to Resolve U0140 Loss of Communication with Body Control Module?

Is it a big deal if car tires are submerged in water for a day?

Can the China VI GPF be removed?

How to Remove Stains from White Car Paint?

Is it a problem for motorcycles to be outside in the rain?

What causes the hard brake pedal and ineffective braking in a GL8?