What is the fuel consumption of a BMW?

2 Answers
JoannaAnn
09/08/25 2:40am
Taking the BMW X1 as an example. The fuel consumption is 8.50L/100km (2.0L manual) or 9.20L/100km (2.0L automatic). Here are the detailed specifications of the BMW X1: Overview: The BMW X1 is a compact SUV from BMW. The model dimensions are 4454mm×1798mm×1545mm. The wheelbase is 2760mm. The trunk capacity ranges from 420-1350L. The fuel consumption is 8.50L/100km (2.0L manual) or 9.20L/100km (2.0L automatic). Others: The engine type is a 2.0L-L4/3.0L-L6 engine. The standard seating capacity is 5. The top speed is 295km/h. The seat material is leather. The acceleration time is 7.6-10 seconds (0-100km/h). The drive type is rear-wheel drive or all-wheel drive. The vehicle weight is 1685 kilograms.
Was this review help?
16
3
Share
LeZoey
09/19/25 8:19am
The fuel consumption of BMW vehicles is actually quite complex. Let me share from my own driving experience. After driving BMW 3 Series and 5 Series for several years, I've noticed that in city stop-and-go traffic, the fuel consumption ranges from about 9 to 12 liters per 100 kilometers, depending on traffic congestion. On highways, it can drop to around 7 liters - maintaining steady speeds on highways does save fuel. However, there are significant differences between BMW models. For example, SUVs like the X5, due to their weight and higher aerodynamic drag, might consume 12-15 liters in urban driving, while smaller models like the 1 Series are much more fuel-efficient. Driving habits also play a crucial role. By avoiding sudden braking and peak traffic hours, I've managed to keep fuel consumption lower. Regular maintenance is equally important - proper tire pressure and clean engines ensure efficient operation. Overall, while BMW's fuel consumption isn't the lowest, the driving pleasure compensates for the fuel costs, creating a balanced experience.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

How to Adjust Valves on a Four-Cylinder Engine?

Method for adjusting valves on a four-cylinder engine: Rotate cylinder 1 to the compression top dead center aligned with the 0 mark or the pointer in the timing gear chamber, then adjust the intake and exhaust valves of cylinder 1, the intake valve of cylinder 2, and the exhaust valve of cylinder 3. Rotate another 360 degrees and adjust the exhaust valve of cylinder 2, the intake valve of cylinder 3, and the intake and exhaust valves of cylinder 4. Owners can first use a screwdriver with a wooden handle to listen for which cylinder is not making noise or is making less noise, then refer to the valve clearance of this cylinder to adjust the valve clearances of the other three cylinders. When adjusting valve clearance on a cold engine, it should be slightly larger; when adjusting on a hot engine, it should be smaller. Most adjustments are done after the engine is hot and then shut off before adjusting the valve clearances.
3
4
Share

What do the S and L gears mean in the Civic?

The meanings of the S and L gears in the Civic are: 1. The S gear is the sport mode, which should be engaged when acceleration is needed; 2. The L gear is the low-speed forward gear, which should be engaged when going downhill or descending a long slope. The L gear only changes the shifting of the transmission, so if you want better power response when starting the vehicle, engaging the S gear is a good choice. The Civic is a compact car under Honda, and it comes in multiple models, including a three-door hatchback, a hardtop coupe, a hybrid version, and a five-door sedan version. The tenth-generation Civic performs well in terms of space, with ample legroom in both the front and rear seats, generous headroom in the front seats, but somewhat limited headroom in the rear seats. The central floor hump in the rear is not prominent, enhancing practicality, and the storage compartments are quite functional. The car's dimensions are 4649mm in length, 1800mm in width, and 1416mm in height, with a wheelbase of 2700mm.
16
3
Share

What is the battery model for the Volkswagen Golf key?

The battery model is CR2025. It is a lithium-manganese dioxide battery, named according to the IEC standard. Among them: C- indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R- indicates that the battery shape is cylindrical; if it is square, F is used instead; 20 indicates the battery diameter is 20mm; 25 represents the battery height is 2.5mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity ranges from 140-170mAh. CR2025 typically has a lifespan of 5 years. If the manufacturer's production level is low or quality control is poor, its lifespan will be significantly shortened. Domestic first-tier brand batteries can generally guarantee this lifespan. If the usage environment is ideal (sealed, room temperature, no moisture, etc.), the lifespan can be further extended to 8 years or even 10 years. The usage time of the vehicle remote key battery is closely related to the frequency of use—the more frequently it is used, the shorter the lifespan. If the remote key battery runs out, the mechanical key can be used directly to unlock and start the vehicle. Car remote keys use button batteries, mainly three types: CR2016, CR2025, and CR2032. For the specific model used in each vehicle, owners can refer to the battery model in the user manual for replacement. Button-type CR2016 battery: The usage rate of car key remotes is very high, making it one of the most common remote battery types. The battery voltage is 3V, while most car key batteries are powered by 9V, so three batteries need to be replaced each time. Examples include Honda, Toyota, Volkswagen, Mazda, etc. CR2016 specifications: battery diameter 20mm, thickness 1.6mm. Button-type CR2025 battery: Its usage rate is much lower than CR2016, but some car keys still use it. It is thicker than the 2016 model but has a relatively higher storage capacity. CR2025 specifications: battery diameter 20mm, thickness 2.5mm. This type of battery is also commonly used in audio remotes. Button battery CR2032:
14
5
Share

How early can a vehicle undergo its six-year inspection?

Vehicle six-year inspection can be performed up to 90 days in advance. According to the motor vehicle registration regulations, the owner can apply for the inspection compliance mark at the vehicle management office in the registration location within three months before the expiration of the current inspection validity period. If a vehicle fails to undergo the annual inspection on time and continues to be driven on the road, it will be subject to fines and may be temporarily impounded. Moreover, if an accident occurs during this period, the insurance company will not provide compensation. Before the annual inspection, the vehicle owner should prepare relevant documents, including the original vehicle license, duplicate of the compulsory traffic insurance, copy of ID card, and the vehicle itself. If it is a company vehicle, the agent's information should also be prepared.
18
0
Share

What does the 'service' light on the car mean?

The 'service' light on the car is a maintenance reminder indicator. When this light illuminates, it alerts the driver that the vehicle requires inspection or replacement of certain worn parts. It is recommended that the owner performs maintenance within the specified intervals, which are typically set at 5,000, 7,500, or 10,000 kilometers. The car dashboard features various indicator or warning lights, including the coolant level warning light, fuel level indicator, washer fluid level indicator, charging system indicator, high/low beam indicator, transmission gear position indicator, anti-lock braking system (ABS) indicator, traction control indicator, and airbag (SRS) warning light, among others.
17
1
Share

What to Do When a Car Fuse Blows?

Solutions for a blown car fuse: 1. Identify the cause of the blown fuse, checking for behaviors such as washing the engine compartment with water, installing high-power headlights, or adding other high-power accessories; 2. Locate the fuse position according to the specific car model, carefully referring to the manual to find the fuse; 3. Use tweezers to remove the blown fuse and replace it with a spare fuse of the same model. In a car's electrical system, numerous electrical devices are connected by wires of different colors, among which the fuse is crucial. The term "fuse" is a common name, while the national standard refers to it as a "circuit breaker." The function of a fuse is to protect the circuit (wiring) and electrical devices.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.