What is the fuel consumption of a blue plate 4.2-meter truck?

2 Answers
OLeila
07/30/25 2:26am
The fuel consumption of a blue plate 4.2-meter truck is 13-15L. The blue plate is a small vehicle license plate, featuring white characters and borders on a blue background. This plate is installed on trucks with a total mass below 4500KG (excluding) and vehicles with fewer than 20 passengers (excluding the driver) and a body length under 6 meters (excluding). Below are the reasons for high fuel consumption: 1. Improper driving habits: Fuel consumption is closely related to the driver's habits, such as prolonged idling without turning off the engine or frequent ignition, aggressive acceleration or frequent braking, driving at low gear with high speed or high gear with low speed, etc. These habits significantly contribute to increased fuel consumption. 2. Abnormal tire pressure and tire wear: Low tire pressure increases friction between the tire and the ground, leading to greater resistance and higher fuel consumption. The normal tire pressure is around 2.5bar, which can be slightly reduced by 0.1bar in summer. However, tire pressure should not be too high either; it's best to maintain the standard value recommended for the vehicle. Additionally, severely worn tires can cause frequent skidding, also increasing fuel consumption. 3. Fuel quality and carbon deposits: Many drivers overlook fuel quality. Poor-quality gasoline can lead to increased carbon deposits, which roughen the intake pipe walls, affecting air intake and the quality of the air-fuel mixture, causing a sharp rise in fuel consumption. Therefore, gasoline quality should not be neglected. Regular maintenance at a 4S shop is a forward-looking investment, ensuring normal vehicle performance and saving unnecessary expenses in the long run.
Was this review help?
2
4
Share
MacTravis
08/15/25 8:34am
I've been driving this blue-plate 4.2-meter light truck for over a decade, delivering goods frequently, so fuel consumption is always on my mind. Generally speaking, this type of vehicle averages 12 to 15 liters per 100 kilometers, depending on the load and road conditions. My Dongfeng Dolika consumes at most 11 liters on the highway when empty, but that jumps to over 16 liters when fully loaded in the city. Using air conditioning or driving in rainy weather with higher wind resistance also burns more fuel. I remember one long trip to Anhui, fully loaded for 300 kilometers, using 38 liters of fuel—I was relieved it wasn’t worse. I recommend developing good habits, like checking tire pressure and engine condition regularly. Saving on fuel means more earnings. Though these trucks are compact and agile, don’t overlook maintenance details—fuel efficiency equals cost savings.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

What to do when the Tiguan displays 'triprip'?

Tiguan displays 'triprip', you need to press the buttons on both sides of the dashboard simultaneously. Here is more information about the Volkswagen Tiguan: 1. The Volkswagen Tiguan is a compact SUV produced by Shanghai Volkswagen, a model under the Volkswagen brand. Shanghai Volkswagen Tiguan offers a total of 4 versions and 7 models, including Urban Edition, Trendline, Comfortline, and Highline. 2. The Tiguan is equipped with the industry-leading 1.8TSI and 2.0TSI engines. The 2.0TSI engine delivers a maximum power of 147kW and a maximum torque of 280Nm, achieving peak torque at just 1700rpm, combining the characteristics of small displacement with high power and low-speed high torque. The 1.8TSI engine also performs excellently, reaching a maximum torque of 250Nm at 1500rpm, surpassing its peers by 25%-30%.
1
3
Share

What are the reasons for intermittent cooling failure in the 8th generation Accord's air conditioning system?

The reasons for intermittent cooling failure in the 8th generation Accord's air conditioning system include the following points: 1. Overcharged refrigerant. During high-speed driving, the fast engine speed leads to high pressure in the refrigeration system, causing the pressure controller (pressure switch) to activate and the compressor to stop, resulting in cooling interruption. During low-speed driving, the slower engine speed reduces the refrigeration system pressure, allowing the pressure switch to close, the compressor to operate, and cooling to resume. This creates the intermittent cooling effect. 2. Excessive external temperature or poor heat dissipation triggering compressor overheating protection. Alternatively, a dirty external unit evaporator may prevent the compressor from working. 3. A dirty indoor unit filter screen. Open the panel and remove the filter. If dust is present, clean it with a used toothbrush in water and reinstall it.
15
0
Share

What does the internal and external air circulation in a car mean?

Car air conditioning internal and external circulation means: 1. Internal circulation allows air to circulate only inside the car, driven by the blower to cycle the air within the vehicle. 2. External circulation connects the inside of the car with the outside. While driving, airflow automatically enters the car using wind pressure, and when stationary, outside air can still enter the blower through the air ducts and be blown into the car. There are two situations when deciding whether to use internal or external circulation in car air conditioning: 1. When the outside air quality is poor, to prevent harmful gases from entering the cabin, it is necessary to set it to internal circulation. 2. During long highway drives, to prevent a decrease in oxygen levels inside the car, it is advisable to alternate between internal and external circulation.
8
0
Share

How to Turn On/Off the Rear Wiper of Borgward?

The switch for the Borgward rear window wiper is located on the control stalk on either side of the steering wheel. Generally, when facing the steering wheel, the wiper control stalk can be seen on the right side. Locate the right-hand combination control switch on the steering wheel. There is a rotatable switch at the head of the wiper control stalk, which is used to operate the rear window wiper. Gently rotate the control stalk to activate the rear wiper, pushing the stalk in the opposite direction of the driver. Move the control stalk to the 'off' position to turn off the Borgward rear wiper.
10
0
Share

What is the best solution for SX4 engine noise?

Tighten or adjust the screws of the engine underguard. The engine mount cushions support the engine and need replacement when aged. Accessory belts such as the power steering belt and alternator belt may cause noise if worn, loose, or overly tight—replace or adjust tension accordingly. Bearing noise typically produces a rhythmic "humming" sound; components like the engine tensioner pulley, idler pulley, or alternator may require part replacement for resolution. Excessive carbon buildup inside the engine or use of substandard fuel can be addressed by cleaning carbon deposits and switching to proper fuel.
10
4
Share

How to Remove the Jetta Radiator Fan?

Jetta radiator fan removal method is as follows: 1. First, open the car's hood and remove the intake pipe located above the fan. 2. The electric fan and air conditioning fan are located on the fan frame, with four corners in total, each corner has a screw. Use professional tools to unscrew these four screws. 3. After all screws are removed, the fan can be taken off the car. Here is more information about Jetta: 1. Jetta is a car brand under FAW-Volkswagen. Its first product, the Jetta (Jetta-MK1), was launched in Europe in 1979. 2. The new Jetta was launched on December 7, 2016, including 1.4L, 1.5L, and 1.4TSI engine displacements, with 5-speed manual, 6-speed automatic, and 7-speed dual-clutch transmissions, totaling 9 models, equipped with Volkswagen's latest generation EA211 series engine.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.