What is the fuel consumption of a 250cc motorcycle for 100 kilometers?

1 Answers
BrielleFitz
07/28/25 3:40pm
The actual fuel consumption of a 250cc motorcycle for 100 kilometers is between 2.5-3.2 liters. Here are the specific methods for daily maintenance of motorcycles: Control idle speed: During the break-in period, control the motorcycle's idle speed at 100 rpm. Gear correspondence: Match the motorcycle's gear with the speed. Braking method: When you need to brake due to a situation ahead, release the throttle, step on the rear brake with your right foot, and gently apply the front brake with your right hand. Spark plug installation method: For new spark plugs, hand-tighten until you can't turn it anymore, then use a spark plug socket to tighten it an additional quarter to half turn.
Was this review help?
17
1
Share
More Forum Discussions

What does emergency braking mean?

Emergency braking refers to the situation when a driver quickly and correctly applies the brakes to stop the vehicle in the shortest possible distance during an emergency while driving. There are three key points to note when using emergency braking: 1. Use emergency braking only in dangerous situations: Emergency braking can cause significant damage to the vehicle and tires, and often due to inconsistent braking between the left and right wheels or differences in adhesion coefficients, it may lead to the vehicle swerving, spinning, or losing directional control. 2. Do not pull the handbrake when performing emergency braking on rainy or icy roads: On such surfaces, locking the tires not only has no effect on braking but may also cause the vehicle to skid sideways. 3. Try to avoid obstacles: Minimize harm to the driver, passengers, pedestrians, and other vehicles by choosing relatively safer obstacles to force the vehicle to stop.
1
3
Share

What is the fuel consumption of the GW250?

The comprehensive fuel consumption of the GW250 is basically around 3.5L per 100 kilometers. The actual fuel consumption may vary slightly depending on each individual's driving habits and skills. More stable driving habits result in lower fuel consumption, while aggressive driving behaviors such as frequent high-speed overtaking can appropriately increase the fuel consumption. Below are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance may lead to increased fan speed and lower temperature settings to achieve a cooler effect. 2. Frequent hard braking: Frequent hard braking is a major factor contributing to high fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid excessive use of air conditioning in small-displacement vehicles: For vehicles exposed to the sun, it is not advisable to turn on the air conditioning immediately upon entering. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside the vehicle. After the vehicle has cooled down moderately, then turn on the air conditioning.
10
3
Share

How to Remove the Steering Wheel Airbag of a Wrangler?

Steps to disassemble the steering wheel airbag of a Wrangler: First, remove the cover behind the steering wheel and take out the airbag component. Then, unscrew the central screw to remove the steering wheel, ensuring proper alignment. Finally, detach the steering wheel airbag. Here is some information about the steering wheel airbag: 1. Airbag System: It is a passive safety protection system that, when used in conjunction with seat belts, provides effective collision protection for occupants. 2. During a collision: The car airbag can reduce head injuries by 25% and facial injuries by approximately 80%. 3. In the event of a frontal impact: The airbag effectively protects passengers, and even if the seat belt is not fastened, the collision airbag is sufficient to significantly reduce injuries.
17
2
Share

Is it necessary to install a dash cam?

It is necessary to install a dash cam. The specific reasons are as follows: 1. A dash cam can protect the driver's legal rights. It records the entire driving process, and in the event of an accident, it can help restore the truth, quickly determine liability, and avoid losses. 2. After installing a dash cam, the incidence of accidents will significantly decrease, and hit-and-run cases will also be greatly reduced. 3. A dash cam can be used as a home surveillance device or for parking monitoring. 4. Car owners who enjoy self-driving tours can use the dash cam as a DV to record the wonderful experiences of their journey. After the trip, processing the videos is a great way to document the outing.
2
3
Share

Difference Between 215 Tires and 225 Tires

225 and 215 represent the cross-sectional width of the tires. The cross-sectional width of a 225 tire is 225 millimeters, while that of a 215 tire is 215 millimeters. The differences between 215 tires and 225 tires are as follows: The cross-sectional width of the tires is different. The tread of a 225 tire is wider than that of a 215 tire, increasing the contact area between the wheel and the ground, resulting in stronger adhesion and better grip for the wider tire. The tread of a 215 tire is narrower than that of a 225 tire, reducing the contact area between the wheel and the ground, leading to lower adhesion and poorer grip for the narrower tire.
20
3
Share

What are the precautions for novice drivers on highways?

Novice drivers should pay attention to the following four points when driving on highways: 1. Different speed limits for each lane: The speed range varies for each lane on the highway. Although the maximum speed limit on domestic highways is 120km/h, the actual driving speed should comply with the speed indicated by the road signs. 2. Do not occupy the emergency lane unless in an emergency: Unauthorized use of the emergency lane will result in severe penalties. 3. Turn on the low beam when entering a tunnel: Traffic laws clearly stipulate that vehicles must turn on the low beam after entering a tunnel. 4. Avoid tailgating or driving close to large trucks for extended periods: Large trucks have massive bodies and significant blind spots in their driving visibility, so it's best to stay away from them as much as possible when driving at high speeds.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.