What is the fuel consumption of a 1.5L engine idling with AC on for one hour?

1 Answers
DeFrank
07/29/25 2:25pm
1.5L engine idling with AC on for one hour will increase fuel consumption by about 20% compared to normal driving. Here are some methods to reduce fuel consumption: 1. Strengthen vehicle maintenance: Car adjustments and maintenance affect engine performance and driving resistance. Owners should regularly perform routine maintenance at auto repair shops, such as checking tire pressure, wheel alignment, adjusting brake pad and brake drum clearance, lubricating chassis points, timely oil changes, and filter inspections. 2. Avoid prolonged engine idling: Fuel consumption during parking idling is much higher than during normal driving. Therefore, it's best to turn off the engine when the vehicle is stationary for extended periods, such as waiting for someone.
Was this review help?
14
1
Share
More Forum Discussions

Can a motorcycle only carry one person?

Some motorcycles can carry two people, while others can only carry one. Relevant legal regulations: Article 55 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" stipulates the following rules for motor vehicle passenger carrying: Highway passenger vehicles must not exceed the approved passenger capacity, except for children exempt from tickets as per regulations. When the passenger capacity is full, the number of exempt children must not exceed 10% of the approved capacity; cargo vehicle compartments must not carry passengers. On urban roads, cargo motor vehicles may carry 1 to 5 temporary workers in the compartment if safe space is reserved; when cargo height exceeds the compartment barriers, no passengers are allowed on the cargo; motorcycles must not carry minors under 12 years old on the rear seat, and light motorcycles must not carry passengers. Specific differences: Motorcycles with blue license plates can only carry the driver, while those with yellow license plates can carry the driver plus one additional passenger.
13
1
Share

Does a Hybrid Car Need the Engine to Run the Air Conditioner?

Hybrid cars require the engine to run the air conditioner. A hybrid electric vehicle, also known as a hybrid vehicle, is equipped with more than one power source: storage batteries, fuel cells, solar panels, or internal combustion engine generators. Currently, hybrid vehicles generally refer to those combining an internal combustion engine generator with a storage battery. Below are the functions of a car air conditioner: 1. Temperature regulation: This is the primary function of a car air conditioner. In summer, the cooling system produces cold air to lower the temperature inside the car; in winter, except for large commercial vehicles that use independent combustion heaters, most vehicles utilize waste heat from the engine for heating. 2. Humidity regulation: Humidity significantly affects passenger comfort. The humidity inside the car should generally be maintained between 30% and 70%. Standard car air conditioners do not have the capability to regulate humidity; this is only possible through ventilation systems or advanced luxury cars equipped with integrated heating and cooling systems. 3. Airflow regulation: The speed and direction of airflow greatly influence comfort. If air is blowing directly, the speed should be limited to a certain range when the temperature is appropriate. The airflow speed can be adjusted based on passengers' living environment, age, health, and temperature preferences. 4. Air purification: The quality of air inside the car is crucial for comfort.
11
0
Share

Which gear to use for hill start?

Use first gear for hill start. Key points: Upon hearing the "hill start and stop" instruction, immediately turn on the right turn signal and steer towards the right side of the area; when approaching the roadside, slightly turn the wheel left, then quickly straighten it right to keep the car parallel to the roadside within 50cm (using the white line at the front parking spot as a reference, do not cross the white line); depress the clutch and slowly approach the stopping point. When the small rearview mirror on the right hood aligns with the stop sign, press the foot brake, stop, pull the handbrake (until two clicks are heard), and turn off the turn signal; before starting, shift to first gear, turn on the left turn signal, and honk once; slowly release the clutch while holding the handbrake lever ready to start; when the car body vibrates or gear engagement sounds are heard, release the handbrake, and the car will move forward (some instructors may use the technique of slowly releasing the clutch while pressing the accelerator to start, with the same result in the road test). Test purpose: To assess the driver's ability to operate the vehicle on a slope, accurately judge the vehicle's position, and correctly use the brake, gear, and clutch to meet the needs of stopping and starting on an uphill section.
18
5
Share

Porsche or Maserati for 1 Million?

Porsche is a German automobile brand, while Maserati is an Italian car brand. Both are outstanding representatives in the luxury car segment. Among domestic consumers, Maserati and Porsche are considered superior to BBA (BMW, Benz, Audi). If asked, 'Which is better, Maserati or Porsche?' it would indeed require a thorough comparison to determine the winner. The specific details are as follows: 1. Brand Recognition: In terms of brand recognition, Porsche has an incomparable advantage. In the 2017 ranking of the world's top ten famous car brands, Porsche was listed, while Maserati was nowhere to be found. Domestic consumers' admiration for Porsche is undoubtedly more direct than for Maserati. 2. Sales Volume: Sales might help determine the winner. In 2017, Maserati's global sales reached 48,700 units, a year-on-year increase of 21%, with annual sales in the Chinese market reaching 14,498 units, a year-on-year growth of over 18%. In contrast, Porsche's global sales in 2017 were 246,375 units, a year-on-year increase of 4%. Among these, sales in China ranked first globally, reaching 71,508 units, a year-on-year growth of 10%.
4
1
Share

Does Idling Affect the Car?

Idling has a certain degree of harm to the vehicle. Why idling consumes fuel: The cylinders consume fuel during operation, and idling is equivalent to doing useless work. According to the law of energy conservation, the fuel is converted into heat and lost, while the car does not move at all. The reason for fuel waste is that when the engine speed is very low (idling is generally the lowest point), the leakage of the valves and piston rings increases, and the contact time between the combustion gases in the cylinder and the cylinder wall lengthens, increasing heat dissipation losses, thus causing the engine's fuel consumption to rise. For gasoline engines, since the intake airflow is relatively weak during idling, the carburetor has difficulty dispersing the fuel mist, requiring a richer mixture, which also increases fuel consumption. The hazards of idling: Under idling conditions, due to incomplete combustion in the cylinder, the exhaust contains a large amount of harmful and toxic components such as hydrocarbons, carbon monoxide, and nitrogen oxides. During the emission of these harmful and toxic components, some deposit in the cylinder. During idling, the engine oil pressure is relatively low, worsening the lubrication of moving parts. Unburned fuel washes the cylinder walls, the intake vortex is weak, and fuel combustion is incomplete, leading to the easy formation of carbon deposits. The above factors will accelerate the wear of moving parts. In addition, when the coolant temperature drops below 60 degrees, combustion byproducts in the cylinder may react chemically with water, forming acidic substances, thereby increasing cylinder corrosion.
9
2
Share

Why Does the Volkswagen Dry Dual-Clutch Make a Clanging Noise in 1st and 2nd Gears?

Because the dry dual-clutch transmission is not immersed in fluid internally, it involves mechanical collisions and friction. When passing over speed bumps, there may be metal clanging sounds. If abnormal noises occur, it is best to conduct a thorough inspection to rule out whether it is a transmission fault. If computer diagnostics and test driving exclude issues with the transmission itself, then it can be confirmed that the problem is caused by uneven surfaces due to burning spots on the clutch plates. Below are common transmission faults: 1. Oil Leakage: Oil seeping from the transmission housing or oil pan can be due to aging seals causing poor sealing or manufacturing defects leading to porosity in the housing. 2. Engine Stalling When Engaging Gear: Stalling when shifting into D or R may be caused by a damaged lock-up solenoid valve or a stuck lock-up control valve. 3. Locked Gear: Incorrect input or output signals from the transmission, or issues with components or wiring, can cause this. Sometimes, communication problems between the transmission computer and other system computers can also lead to this. 4. No Response When Engaging Gear: The vehicle does not move after shifting into D or R and releasing the brake. This is often due to damage to the input shaft or reverse clutch, or failure of the D/R brake. 5. Abnormal Noises: Unusual sounds from the transmission area while driving are usually caused by worn parts or improper installation of the transmission.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.