What is the fuel consumption for 300 kilometers?

1 Answers
LeKimberly
07/30/25 12:24am
First, it depends on the type of car and its comprehensive fuel consumption per 100 kilometers. Assuming the fuel consumption is around 7L/100km, then the fuel consumption for 300 kilometers would be 21L. Here is some related information about vehicle fuel consumption per 100 kilometers: 1. Definition of fuel consumption per 100 kilometers: It refers to the fuel consumption of a vehicle traveling 100 kilometers at a certain speed on the road. It is a theoretical indicator for vehicles. 2. Measurement method of fuel consumption per 100 kilometers: Manufacturers measure this value in an objective environment using a dynamometer installed on the vehicle chassis, converting it into speed parameters, then specifying the speed to calculate the theoretical experimental fuel consumption data per 100 kilometers for the vehicle model.
Was this review help?
6
2
Share
More Forum Discussions

What is the minimum vision requirement for a C1 driver's license?

The naked or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart. Below is relevant information about the C1 driver's license: 1. Introduction: The C1 driver's license is a type of driving license code, permitting the operation of small and mini passenger vehicles, light and mini cargo vehicles, and light, small, and mini special operation vehicles. Applicants can directly apply for the license with their resident ID card at any location nationwide without submitting proof of residence registration. The examination subjects include four items: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving knowledge. 2. Driving requirements: According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the scope of the C1 driver's license includes small and mini passenger vehicles and light and mini cargo vehicles; light, small, and mini special operation vehicles; small passenger vehicles with a seating capacity of 9 or fewer. According to this standard, a C1 license cannot be used to drive vehicles with more than 9 seats. Additionally: The total length of the driven cargo vehicle must not exceed 6 meters.
3
4
Share

What is the process for transferring a motorcycle across different regions?

First, prepare the ID cards of the original owner and the new owner, which are mandatory documents to carry, as well as the vehicle's registration certificate. The registration certificate is an essential document for a smooth transfer. Then, bring the motor vehicle's registration certificate. Once everything is ready, you can proceed to the vehicle management office for the transfer. Wait for the staff to conduct inspections and registration: After arriving at the vehicle management office, wait for the staff to inspect the vehicle. The exterior, engine number, and license plate will all be checked, followed by photography. Afterward, proceed to the designated area to submit the required documents. The original license plate and registration certificate will be retrieved, and the new owner can then select a new license plate number. The transfer details must be signed in the registration book, and the new owner can take the chosen license plate number and inspection compliance sticker home. Important notes: If the license plate is not issued on the same day, the vehicle management office will provide a temporary license plate after the transfer is completed. If the license plate is received, it can be directly installed, and the vehicle can be driven on the road.
15
4
Share

What happens if you shift into P gear while driving?

Although the P gear can be used to achieve braking effect when the car's braking system fails, suddenly shifting into P gear during normal driving will produce a series of very loud noises, which come from inside the transmission. Of course, this does not cause significant damage to the engine, and the car can still start and drive normally, but it will accelerate the wear of the internal gears in the transmission. Here is some additional information: 1. In fact, the P gear functions similarly to N (neutral gear plus handbrake) and can replace the vehicle's braking system when the handbrake fails, preventing the car from rolling. 2. Of course, do not use the P gear for braking at high speeds unless in an emergency, as it will cause significant impact on the transmission. In such cases, the pawl and ratchet wheel may deform due to high-speed collision, and the pawl may even break. The broken parts moving inside the transmission can cause irreversible damage or even render the transmission completely unusable.
2
0
Share

How to Solve the Engine Light Caused by Poor Fuel Quality?

If the engine light is caused by poor fuel quality, you can drain all the bad fuel and refill with high-quality fuel. In some cases, the engine fault light will turn off by itself after about half a minute of driving. Below is relevant information: Fuel quality is the main cause of the engine fault light: 1. The anti-knock property of gasoline is indicated by the octane number. The higher the octane number, the better the anti-knock property. For example, 97-octane gasoline has an octane number greater than 97. Leaded gasoline can cause lead poisoning in the oxygen sensor, so fuel quality is a major factor in insufficient engine combustion, leading to the engine fault light turning on. 2. The engine has specific requirements for fuel quality indicators, especially as regulations in various regions impose higher demands on engines, thus requiring higher fuel quality standards. When refueling, always use the appropriate fuel grade for your vehicle and avoid using inferior fuel. Additionally, always refuel at reputable dealers to ensure fuel quality; otherwise, it may cause damage to your vehicle.
15
2
Share

What to Do When Running Out of Fuel on the Highway?

Solutions for running out of fuel on the highway are as follows: 1. Maintain a high gear and exit the highway as soon as possible: It is not recommended to shift into neutral. Try to maintain a constant speed in a high gear, as most vehicles are most fuel-efficient at speeds between 80 to 100 kilometers per hour. Exit the highway immediately when you encounter an exit, as gas stations are usually located near highway entrances and exits. 2. If fuel is critically low, pull over and call for help: If the fuel level is very low, be sure to stop in the emergency lane, turn on the hazard lights, place a warning triangle, and then call 110 or 122 for assistance. While waiting, occupants should not remain in the vehicle. While calling for help, you can also try to flag down passing vehicles to buy fuel. If the vehicle manufacturer provides rescue services such as fuel delivery or jump-starting, the driver can call the manufacturer's hotline for assistance. 3. If there is a gas station nearby, walk to buy fuel: If you can see a gas station or service area within sight, you can also walk to buy fuel. However, do not push the car on the highway. After parking the car safely, walk along the outside of the guardrail to the gas station, purchase a small amount of fuel, return to the car to add it, and then drive to the gas station for a full refill.
5
3
Share

What are the Penalty Standards for Not Wearing a Seat Belt?

According to the relevant provisions in the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," the following penalties apply for driving without wearing a seat belt: 1. When driving on urban expressways, if the driver fails to use the seat belt as required, a fine of 50 yuan and 2 demerit points will be imposed. 2. When driving on roads other than highways or urban expressways, if the driver fails to use the seat belt as required, a fine of 50 yuan will be imposed without demerit points. 3. Urban expressways refer to urban roads with a central divider, four or more lanes, and full or partial interchanges and controlled access, designed for higher-speed vehicle travel. If passengers fail to use seat belts as required while the vehicle is in motion, a fine of 5 yuan will be imposed. 4. When driving on highways, if the driver fails to use the seat belt as required, a fine of 50 yuan and 2 demerit points will be imposed. 5. When traveling on highways, if passengers fail to wear seat belts as required, a fine of 20 yuan will be imposed. 6. When driving on urban roads with a speed limit below 50 km/h, if passengers fail to use seat belts as required and correct the behavior immediately after being pointed out, an oral warning will be issued.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.