···
Log in / Register

What is the fuel consumption displayed for the CHR?

4 Answers
Nick
07/29/25 8:38pm

Toyota CHR has a combined fuel consumption of 5.7-5.9 (L/100km). Since fuel consumption is related to driving habits, vehicle load, and road conditions, an actual average fuel consumption fluctuation of around 10% is normal. Below is some relevant information about the Toyota CHR: 1. Powertrain: The Toyota CHR is equipped with a 2.0-liter naturally aspirated engine, delivering a maximum power of 126kW (171PS) and a peak torque of 203N·m. In terms of the transmission system, the CHR uses a new-generation Direct-Shift-CVT continuously variable transmission with a gear drive mechanism that can simulate 10 speeds. 2. Features: The Toyota C-HR comes standard with a multi-function steering wheel adjustable in four directions, a leather gear shift knob, a 4.2-inch instrument display screen, and fabric seats. Additionally, six-way adjustable front seats and 4/6 split-folding rear seats are also standard. The trunk size is as large as 770/950/680mm. The Leading Edition and higher trims are equipped with a 9-inch central control screen featuring a built-in voice-controlled navigation system. The Leading Edition and Luxury Edition come with dual-tone fabric seats, while the Luxury Edition and Flagship Edition feature a leather steering wheel. The top-tier Flagship Edition exclusively offers leather and synthetic leather combination seats.

Was this review help?
16
0
Share
SanVivian
08/14/25 5:49pm

I've been driving for over ten years and have experience with the Toyota C-HR. I'm quite familiar with its fuel consumption. The official data claims an average of 6.5 liters per 100 kilometers. On highways, it can indeed drop to 5-6 liters, but in congested urban areas with frequent stops and starts during my commute, the consumption often rises to 8-9 liters. Many factors affect fuel efficiency—driving habits are the most critical. Aggressive acceleration or braking consumes extra fuel, so I’ve developed a habit of gently pressing the throttle to maintain steady speed. Using air conditioning in summer can add about 0.5 liters, while in winter, the impact is smaller. Tire pressure shouldn’t be overlooked either—low pressure increases friction and raises fuel consumption. I’ve also tried ECO mode, which optimizes throttle response and helps me maintain around 7 liters. Vehicle weight and engine efficiency matter too. The C-HR’s compact design reduces drag, making it more fuel-efficient than other SUVs in its class. Regular maintenance, like oil changes and air filter cleaning, ensures stable fuel consumption. Overall, it’s a practical performer.

Was this review help?
9
1
Share
Expand All
Guzman
10/16/25 5:40am

As a daily driver, I've been driving the C-HR for several years, with a daily commute of 40 kilometers and an average fuel consumption of 7 liters per 100 kilometers. During morning rush hour traffic jams, it can go up to 8.5 liters, while on weekends, driving on the highway easily brings it down to 6 liters. With a fuel tank capacity of 50 liters, a full tank can cover around 700 kilometers, making it economical and practical. The main factors affecting fuel consumption are speed and road conditions—60-80 km/h is the most fuel-efficient, while going too fast or too slow consumes more. The car's air conditioning has minimal impact, adding only about 0.2 liters. I recommend fuel-saving tips: avoid sudden braking and use cruise control more often; maintain standard tire pressure at 2.3, saving both time and fuel; the car also has a real-time fuel consumption display, allowing you to adjust driving habits on the go. The C-HR is highly efficient among small-displacement cars, with affordable maintenance costs, making it very family-friendly.

Was this review help?
4
4
Share
Expand All
MacReagan
11/29/25 6:26am

The fuel consumption variation in the C-HR is quite noticeable. The official standard is 6.5 liters per 100 kilometers, but in real-world driving, highway cruising can reach 6 liters, while city traffic jams can spike it above 8 liters. Fuel consumption depends on engine conditions, such as rapid acceleration increasing RPM and consuming fuel quickly; factors like tires or wind resistance also play a role—I feel it guzzles more when driving faster. It's recommended to activate ECO mode to help control consumption and use gradual acceleration to save some fuel.

Was this review help?
9
1
Share
Expand All
More Forum Discussions

What are the reasons for the durability of Fukang engines?

Below are the reasons for the durability of Fukang engines: Fukang is specifically designed to match the Chinese market, and the TU series engines it is equipped with are among the advanced in their technical field. The TU3JP/K and TU5JP/K engines, equipped with the MP5.2 multi-point injection system, offer more robust power, improved acceleration, and enhanced operational reliability. Advantages and disadvantages of Fukang engines: The advantages include a simple engine structure, inexpensive maintenance parts, sufficient power, and direct response from the cable throttle. The disadvantages are that some sensors can be affected by crankcase exhaust gases, leading to unstable idling or acceleration hesitation.
15
0
Share

What is the method for starting on a B2 slope with fixed points?

Here is the method for starting on a B2 slope with fixed points: 1. Going uphill: Before ascending, keep the car close to the right side of the road, within 0.3m of the edge line. 2. Accelerating uphill: Before ascending, appropriately accelerate uphill, and when 20m away from the pole, release the accelerator pedal. Below is additional information related to the Subject 2 driving test: 1. Test requirements: The requirement for parallel parking is for the driver to park the vehicle in the right parking space without the wheels touching the lane boundary or parking space boundary. 2. Subject 2 assessment content and requirements: The five assessment items are reversing into a parking space, parallel parking, stopping and starting on a slope with fixed points, turning at a right angle, and driving on a curved path. Subject 2 requires 26 study hours, of which 2 hours are theoretical knowledge, so the actual practice is 24 hours.
8
3
Share

What Causes the Frequent Malfunction of the Elantra's Reversing Radar?

Frequent malfunction of the Elantra's reversing radar may be due to non-functioning sensors, poor internal contact, or a non-working system display. The specific reasons and solutions are as follows: Non-functioning sensors or poor internal contact: When the car is in reverse, if a specific sensor consistently fails to detect obstacles or the four green indicator lights on the dashboard display flicker erratically, it may indicate that the sensor is not working or has poor internal contact. Solution: Replace the malfunctioning sensor. Non-working system display: When the car is in reverse, if the buzzer sounds but the display shows nothing, the cause may be a loose controller connector, poor contact, or a malfunctioning display. Solution: Replace the combination instrument panel.
4
2
Share

Where is the Audi Q3 audio fuse located?

The fuse box for the Audi Q3 audio system is located on the electrical control box, on the left side of the engine compartment. Function of the fuse: To protect electrical equipment from damage caused by excessive current or overheating. When the current abnormally rises to a certain level and temperature, the fuse will melt and cut off the current, ensuring the safe operation of the circuit. How a fuse works: A fuse is made by melting several types of metals together, making it easier to melt than a wire made of a single metal. When the current is too high, the fuse will melt and break, cutting off power to the wires and electrical appliances, preventing accidents and ensuring electrical safety.
16
3
Share

What is the resistance of a Mercedes seat belt buckle in ohms?

Mercedes seat belt buckle resistance is generally between 2.5 to 3 ohms. Function of seat belts: They serve to restrain movement and provide cushioning, absorbing impact energy, dissipating inertial forces, and preventing or reducing the severity of injuries to vehicle occupants. Correct method for fastening seat belts: Sit in the vehicle seat, pull out the seat belt with one hand while holding the buckle with the other hand. Insert the buckle tongue into the buckle until it clicks securely to ensure the belt is firmly fastened around your body. Before driving, check that the seat belt is secure and functioning properly. To release the seat belt, hold the buckle tongue with one hand and press the "release" button with the other hand, allowing the belt to retract into the reel and storing the buckle tongue in its designated position.
10
3
Share

Where is the DS6 VIN number stamped?

DS6 VIN number is located on a small metal strip at the contact point between the front windshield and the lower left side of the dashboard, where the vehicle identification number is engraved. Additional information: 1. Basic information: The DS6 is DS brand's first A-segment luxury SUV, produced by Changan PSA Co., Ltd. On September 27, the DS6 was launched at the Shuiguan Great Wall in Beijing, offering 6 different models based on configurations. The new vehicle provides consumers with 9 body colors and 6 seat color options. 2. Powertrain: Equipped with the 1.6THP engine that has won the International Engine of the Year award for eight consecutive years, the DS brand-exclusive THP200 engine delivers a maximum output power of 200 horsepower and a peak torque of 275N.m, with performance comparable to mainstream 2.0T engines. All damping pads in the vehicle use PVC materials or butyl rubber, eliminating asphalt materials. It also features an AQS air quality control system and an ion generator to provide a fresh and clean driving environment.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.