What is the front brake friction pad?

1 Answers
Branden
07/30/25 8:16am
Front brake friction pads are brake pads. The following are specific introductions about brake friction pads: 1. Wear: During the use of a car, braking is frequent. Due to the friction effect, the friction blocks of the brake pads will gradually wear out, and the braking effect will become increasingly poor. If not replaced in time, it will eventually lead to the loss of braking effect, affecting driving safety. 2. Replacement: The lifespan of brake friction pads is about 30,000 kilometers. Brake friction pads need to be replaced when worn to a certain extent to ensure that the braking effect is not affected. Since the wear of the braking system is influenced by various factors, it should be checked approximately every 3,000 kilometers. For newly replaced brake pads, a certain break-in period is required to effectively maximize the braking performance.
Was this review help?
4
0
Share
More Forum Discussions

Does a car registered in July 2013 require an annual inspection in 2021?

If the vehicle underwent its last annual inspection before the new policy implementation on November 20, 2020, it will require an inspection in 2021; if the inspection was conducted after November 20, 2020, it will not need an inspection in 2021. Here is relevant knowledge about vehicle annual inspections: Annual inspections for private cars over 10 years old: For private cars that have been in use for more than 10 years, the inspection cycle still follows the original regulations, i.e., an annual inspection is required for cars between 10 to 15 years old, and a semi-annual inspection for cars over 15 years old. Annual inspection precautions: Large decorative stickers on the car body or large eye-catching car club logos are considered unauthorized modifications to the vehicle's appearance and will not pass the annual inspection.
15
0
Share

What is the fuel consumption of the Roewe RX5?

Roewe RX5 manual transmission models have a fuel consumption of 6.5 liters per 100 kilometers, while automatic transmission models consume 7.4 liters per 100 kilometers. The following is a related introduction to fuel consumption: Fuel consumption per 100 kilometers: This refers to the fuel consumption of a vehicle traveling a certain distance at a specified speed on the road. It is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is measured by the manufacturer in an objective environment, using a dynamometer installed on the vehicle's chassis to obtain speed parameters, and then calculating the theoretical experimental fuel consumption data for the model at specified speeds. Road condition fuel consumption: Road condition fuel consumption (Fuel-Economy-of-Chassis-Dynamometer-Test-Cycles) is a fuel indicator calculated by repeatedly testing the values obtained when a vehicle travels on specified roads at specified speeds and times, also known as multi-condition road cycle fuel consumption. The specification stipulates that each cycle includes various driving conditions and records driving conditions according to various indicators such as specified shift times, parking times, driving speeds, acceleration, braking, and deceleration in each cycle. The measured values obtained by this method are closer to actual values.
20
1
Share

Is Wuling a Rear-Wheel Drive Vehicle?

Wuling is a rear-wheel drive vehicle. In rear-wheel drive cars, the front and rear wheels have distinct roles, with the steering wheels and driving wheels separated. This results in excellent high-speed stability, strong climbing ability, balanced front-to-rear weight distribution, and good handling. Rear-wheel drive vehicles excel in acceleration and uphill performance: The Wuling Hongguang is a front-engine commercial vehicle with a front-engine, rear-wheel drive configuration. Its advantages include strong acceleration and uphill performance, greater load-bearing capacity, reduced noise and vibration due to the front-engine layout, and a more comfortable rear passenger area. Rear-wheel drive vehicles provide greater effective traction: Rear-wheel drive vehicles generate greater effective traction. During acceleration, the center of gravity shifts backward, increasing the weight on the rear wheels. This makes rear-wheel drive less prone to slipping, and with greater friction comes increased traction. Therefore, rear-wheel drive vehicles outperform front-wheel drive in acceleration. The rear wheels provide longitudinal force while the front wheels are solely responsible for steering and generating lateral force.
6
1
Share

What is the reason for the Roewe 350 clutch not springing back?

The main reasons for the clutch not springing back are air entering the clutch pipeline system and dirty clutch fluid with impurities. The specific explanations are as follows: Air entering the clutch pipeline system: Air entering the system causes excessive clutch travel and poor return. This type of fault can be self-diagnosed. If the first press of the clutch pedal feels without resistance and the travel is excessive, and the pedal rises after repeatedly pressing it, it is mostly due to air entering the hydraulic system. In this case, the cause of the air entry should be identified as soon as possible, and the air in the hydraulic system should be expelled. Dirty clutch fluid with impurities: Impurities cause severe internal wear of the clutch master cylinder or blockage of the return oil hole, preventing the clutch from returning. You can open the engine hood to check if the fluid in the clutch fluid reservoir appears black or gray. If discolored, the clutch fluid should be replaced promptly.
16
2
Share

Why was the Roewe RX8 discontinued?

Roewe RX8 was positioned to compete with the top tier in the industry. In May 2020, only 542 units of the Roewe RX8 were sold, with a total of 3,043 units sold in the first five months, which was less than one month's sales from the previous year. This model did not gain the market recognition the manufacturer had anticipated. Below is relevant information about the Roewe RX8: Introduction: The Roewe RX8 is a new vehicle from SAIC. SAIC Group officially released the official images of the Roewe RX8, positioning it as a mid-to-large luxury SUV. Exterior: The Roewe RX8 can be considered another masterpiece of Roewe's 'Rhythm Design' language. The front features an integrated grille and full-LED headlights, delivering a highly technological visual effect. The headlights use dual-lens low beams and full-LED technology, with two built-in light guides. The fog lights employ four matrix-style full-LED lens units, leveraging curved surface variations to create four powerful wheel arch contours.
10
0
Share

What is the meaning behind the composition of motor vehicle license plates?

The meaning of motor vehicle license plates can be understood from two aspects: the code character count and the license plate number character count. The motor vehicle registration authority code consists of 2 characters, composed of Chinese characters and English letters. The Chinese character represents the abbreviation of the province, autonomous region, or municipality directly under the central government, while the English letter denotes the code of the vehicle management office. For car-type license plates, the motor vehicle registration authority code is located at the top center of the plate, with the Chinese character and English letter arranged horizontally. For motorcycle-type license plates, the code is positioned on the left side of the plate, with the characters arranged vertically. The license plate number consists of 5 characters, which can be Arabic numerals or a combination of Arabic numerals and English letters. There are 10 Arabic numerals ranging from 0 to 9 and 26 English letters from A to Z. Among these, Arabic numerals must be used for numeric parts, and the letters O and L cannot be used in the alphabetic parts.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.