What is the Frame of an Off-Road Vehicle?

Is the transmission of the Chery Tiggo 8 dry or wet?

Tiggo 8 transmission is dry. The following are the methods for maintaining the transmission: Manual transmission: If the transmission uses mineral gear oil, it needs to be replaced every 3 years or 60,000 kilometers. If synthetic oil is used, regularly check the transmission oil. As long as the oil quality is good, it can be used continuously without replacement. Automatic transmission: For most brands with automatic transmission models, the transmission oil should be replaced every 4 years or 60,000-80,000 kilometers. CVT transmission: Due to its simple structure and the use of synthetic transmission oil, the replacement interval is slightly longer than that of automatic transmissions. It is more appropriate to replace it every 80,000-100,000 kilometers.

1

Share

What to Do When a Motorcycle Engine Won't Start Due to Being Too Cold?

The solutions for a motorcycle engine that won't start due to being too cold are: 1. Check the carburetor, fuel mixture ratio, fuel level, and choke; 2. Check if the valve clearance is too small or if there is air leakage; 3. Inspect whether the high-voltage spark for ignition is strong; 4. Open the choke to force start. The reasons why a motorcycle engine won't start when too cold are: 1. Low cylinder pressure, resulting in poor atomization of the mixture provided by the carburetor or fuel pump at low temperatures, making it difficult to ignite; 2. High engine operating resistance at low temperatures. Methods to prevent a motorcycle engine from failing to start when too cold include: 1. Switch to engine oil with a lower viscosity suitable for winter use; 2. Clean carbon deposits.

4

Share

How to Lift the Wiper Blades Up?

To lift the wiper blades up: 1. Hold the middle part of the wiper blade and lift it upward; 2. Pull the wiper blade to the end and stand it upright. The function of the wiper blades is to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. Wiper blades are blade-like structures installed in front of the windshield, consisting of a motor, reducer, four-link mechanism, wiper arm spindle, and wiper blade assembly. The characteristics of wiper blades are: 1. Heat-resistant, cold-resistant, acid and alkali resistant, and corrosion-resistant; 2. Can fit the windshield well, reducing the burden on the motor; 3. Low noise, strong water repellency, soft material that does not scratch the windshield.

9

5

Share

What are the reasons for the electric car lights not working?

The reasons for the electric car lights not working are: 1. The bulb is burnt out; 2. Poor grounding contact of the light; 3. Damage to the relay or combination switch; 4. Short circuit or open circuit in the power line; 5. The fuse is damaged. The methods to address electric car lights not working are: 1. Check if the fuse is in good condition; 2. Check if the voltage regulator of the generator is set too high. The maintenance methods for car lights are: 1. Regularly check the sealing of the lights, and replace the sealing ring between the diffuser lens and reflector if it is damaged; 2. Clean the reflector regularly, and replace it if it turns black or the light intensity decreases; 3. Regularly clean dust and stains from the bulb.

13

0

Share

How to Install Spark Plugs in the Nissan Qashqai?

The installation method for Nissan Qashqai spark plugs is: hand-tighten the spark plug first, then use a wrench to turn it an additional quarter to one-third of a turn. The spark plugs in the Qashqai should be replaced every 30,000 kilometers. The working principle of a spark plug is: it discharges the high-voltage pulse electricity delivered by the high-voltage wire, breaking down the air between the two electrodes of the spark plug to generate an electric spark, which ignites the air-fuel mixture in the cylinder. The Nissan Qashqai is a compact 5-door, 5-seat SUV equipped with a 2.0L naturally aspirated engine and a CVT (Continuously Variable Transmission), delivering a maximum power of 111kW and a maximum torque of 194Nm. It features front-wheel drive (FWD), with a MacPherson strut independent front suspension and a multi-link independent rear suspension.

9

0

Share

What does it mean when the EPC light on the dashboard is on?

The EPC indicator light can illuminate in two states: during the power-on self-test and under other circumstances. The power-on self-test is an indication that the vehicle is monitoring the status of all sensors before driving. Generally, if the engine is not started after power-on, the light will turn off by itself after about 3 seconds. In other cases, if the EPC light remains on after the vehicle is started, the main causes for the EPC light staying on include faults in the engine intake system, throttle valve issues, fuel system problems, engine malfunctions, ECU control unit failures, or brake light faults. Below is a detailed explanation of the reasons for the EPC light illuminating in other cases: Engine intake system fault: The EPC light will alert when the engine intake is obstructed or insufficient. Throttle valve fault: Carbon buildup is a common issue with the throttle valve. Additionally, dirt accumulation can affect intake, causing the indicator light to illuminate. Fuel system fault: Examples include substandard fuel, fuel deterioration, or poor fuel atomization. Engine fault: Insufficient engine pressure or issues with the intake valves and other powertrain components can also trigger the EPC light. ECU control unit fault: For instance, interference with the vehicle computer signals or false alarms from the vehicle computer. Brake light fault: Situations such as brake lights not working, faulty brake switches, or brake circuit issues. Solutions for when the EPC light comes on: Troubleshoot intake system issues, use fuel with the appropriate octane rating, clean the throttle valve, etc. Remove carbon deposits from relevant parts. Re-flash ECU-related data. If the EPC light comes on, the owner can first try turning off the engine and restarting it to check if the EPC light remains on. If it does not illuminate again, there may be no issue, possibly just the EPC light being affected. If the EPC light stays on or frequently illuminates, drive to the nearest service point for professional assistance in diagnosing and resolving the fault to eliminate safety hazards promptly. The full English name of EPC is Electronic-Power-Control, which translates directly to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system mainly includes controllers and sensors related to the powertrain. When sensor data in the system is abnormal, the EPC system will take predefined actions on the powertrain. Common EPC indicator lights generally display two colors: yellow and red. If the EPC fault light is yellow and the car can still drive normally, proceed slowly to a repair point for inspection. If the EPC fault light is red, the situation is more severe. Pull over immediately and contact a repair technician right away. Continuing to drive could directly affect the vehicle's core components or driving safety.

20

2

Share

What is the Frame of an Off-Road Vehicle?

Is the transmission of the Chery Tiggo 8 dry or wet?

What to Do When a Motorcycle Engine Won't Start Due to Being Too Cold?

How to Lift the Wiper Blades Up?

What are the reasons for the electric car lights not working?

How to Install Spark Plugs in the Nissan Qashqai?

What does it mean when the EPC light on the dashboard is on?

What Causes the Abnormal Noise When Braking and Shifting to P Gear?

How to Adjust the Time on a Dash Cam?

What is the normal tire pressure for the Geely Binyue?

What are the effects of a broken driveshaft?