What is the four-wheel drive system of the Audi Q5L?

1 Answers
DelJulian
07/29/25 3:06pm
The four-wheel drive system of the Audi Q5L is an on-demand four-wheel drive system. This system only switches to four-wheel drive when appropriate, while remaining a two-wheel drive system under other conditions. The on-demand four-wheel drive system automatically switches between two-wheel drive and four-wheel drive modes based on the vehicle's driving conditions, without requiring manual operation. The Audi Q5L is a mid-size SUV under FAW-Volkswagen Audi, with a length, width, and height of 4753mm, 1873mm, and 1659mm respectively, and a wheelbase of 2908mm. The vehicle offers features such as a multifunction steering wheel, full LCD instrument panel, 8.3-inch multimedia display, MMI navigation Plus system, head-up display system, and more.
Was this review help?
3
4
Share
More Forum Discussions

Should You Shift Gears or Apply the Handbrake First When Parking?

When parking, you should first apply the handbrake and then shift into gear. The principle behind the handbrake stopping the vehicle is to clamp the rear brake discs, preventing the rear wheels from rotating. Mechanical cable-type handbrakes use a steel cable to pull the brake caliper, which then clamps the brake disc, while electronic handbrakes operate by controlling a servo motor on the brake caliper to clamp the disc. The P (Park) gear locks the front wheels, and the handbrake locks the rear wheels, ensuring the vehicle cannot move. However, if you try to push the car while only in P gear, you may notice the vehicle can move slightly. This is because the pawl and gear have a relatively large meshing gap. Additionally, the P gear's pawl gear has a self-protection mechanism—once the pushing force reaches a certain level, the pawl will disengage to avoid damaging the transmission. Therefore, the P gear is not as reliable as the handbrake.
1
1
Share

Do I Need to Add Cleaner When Switching to Ethanol Gasoline?

Switching to ethanol gasoline does not require adding a cleaner. As a new generation of clean and environmentally friendly fuel, ethanol gasoline itself is an excellent organic solvent with strong dissolving effects. After adding ethanol gasoline, impurities, dirt, and sediments at the bottom of the fuel tank and in the fuel lines will automatically be softened and dissolved into the gasoline. With increasingly stringent national controls on vehicle emissions, both engine technology and fuel quality have been gradually improving. The cleanliness of today's gasoline is very high, and the amount of sediment and dirt produced in the fuel tank is minimal. For cars that are 5 to 6 years old, there is no need to clean the fuel lines at all. If no issues occur after switching to ethanol gasoline, even after driving an additional 30,000 kilometers, cleaning the fuel lines is still unnecessary.
18
4
Share

Is the Cadillac CT4 a B-segment car?

Cadillac CT4 is a B-segment sedan, meaning the vehicle length is between 4.5 to 5 meters, wheelbase between 2.7 to 3 meters, and engine displacement between 1.6 to 2.4 liters. The dimensions of this car are 4760mm in length, 1815mm in width, and 1421mm in height, with a wheelbase of 2775mm. The Cadillac CT4 is equipped with a 2.0-liter turbocharged engine across all variants, with the engine code LSY. The CT4 features a shield-shaped grille paired with new starfall-style headlights and vertically arranged LED daytime running lights, giving its front fascia high recognizability. The rear section has substantial camouflage, but the vertically designed taillight clusters are visible, with the more striking feature being the quad exhaust layout on both sides, emphasizing its performance orientation.
17
1
Share

What are the differences between the Lynk & Co 05 Time Limited Edition and the regular version?

Lynk & Co 05 Time Limited Edition and the regular version have the following differences: 1. Model aspects: The Time Limited Edition of Lynk & Co 05 is four-wheel drive, and the interior design is different from the regular version. The Time Limited Edition has higher configurations and features suede upholstery. 2. Engine aspects: The Lynk & Co 05 series all use a 2.0-liter turbocharged engine, with a maximum power of 187 kW and a maximum torque of 350 Nm. The engine's maximum power speed is 5500 rpm, and the maximum torque speed ranges from 1800 to 4800 rpm. This engine is paired with an 8-speed automatic transmission. 3. Structure aspects: The front suspension of the Lynk & Co 05 uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.
19
2
Share

Can You Continue Driving with a Faulty Spark Plug?

You can continue driving for a short period with a damaged spark plug, but it should be replaced promptly. Methods to determine if a spark plug is faulty: Remove the spark plug and observe its condition based on the following appearance characteristics. A normal spark plug's insulator skirt and electrodes should appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm and no signs of electrode burn. If the spark plug is covered in oil or deposits but not damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged, showing signs like blistering, black streaks, cracking, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plug with a new one. Additionally, if the spark plug appears black as if smoked, it indicates the wrong heat range was selected, the air-fuel mixture is too rich, or there is oil leakage.
2
3
Share

Does a New Car Need Polishing Before Crystal Coating?

Crystal coating a new car does not require polishing. Whether polishing is needed before crystal coating a new car mainly depends on the following factors: 1. If the new car has just been delivered and hasn't undergone long-distance transportation or prolonged storage, the paint surface will be smooth without an oxidation layer. In this case, polishing is unnecessary, and crystal coating can be applied directly. 2. If the car has been transported over long distances or stored for an extended period, resulting in a noticeable oxidation layer on the paint surface, light polishing is required to remove it. This ensures the crystal coating adheres fully to the paint surface, providing effective protection. Additional Information: 1. Waxing can be done after crystal coating, but it is not necessary. 2. Crystal coating is essentially an upgraded version of car waxing. It enhances the brightness and hardness of the paint, offering protection. After crystal coating, car owners will notice that the paint appears more transparent and glossy, with increased resistance to scratches and corrosion.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.