What is the formula for calculating car fuel consumption?

What does the 'R' on tires represent?

Tire 'R' represents radial tires (radial-tire). Radial tires are a type of tire structure, different from bias tires, arched tires, and pressure-adjusted tires, among others. More information about car tires is as follows: 1. Car tires are one of the important components of a car, directly in contact with the road surface, working together with the car suspension to mitigate the impact experienced during driving, ensuring good ride comfort and smooth driving. 2. Car tires can be divided into radial tires and bias tires according to their structure.

20

0

Share

What type of engine oil does the Lynk & Co 01 use?

Lynk & Co 01 uses Shell SN-grade engine oil with the specification 0W-20. If you want to change the engine oil during later maintenance, you can choose fully synthetic Mobil 1 Gold or Castrol Edge. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity—5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the car. The latter number represents the oil's kinematic viscosity at 100°C. A higher value means the oil can maintain its viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Lynk & Co 01 is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan. Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out. Use a specialized wrench to remove the oil filter. Apply a thin layer of oil to the seal of the new oil filter and tighten it clockwise by hand. Pour the new engine oil into the oil filler cap on the engine valve cover, typically filling about three-quarters of the bottle. Start the engine and let it run for 5 minutes, checking for leaks around the drain plug and oil filter. If leaks are found, repairs should be made. After stopping the engine, pull out the dipstick to check that the oil level is within the standard range.

17

5

Share

What are the reasons why the Nissan X-Trail air conditioner is not cooling?

Reasons why the Chery car air conditioner is not cooling include insufficient refrigerant, severely clogged air filter, excessive debris on the surface of the evaporator, dirty condenser, refrigerant leakage, compressor damage, etc. Solution: Go to a repair shop to check whether the high and low pressure pipelines of the air conditioner are normal, whether the refrigerant is sufficient, whether the air filter is clogged, the working status of the compressor, etc., to troubleshoot the problem. Maintenance methods for car air conditioners: Comprehensive inspection of the air conditioner: When using the air conditioner for the first time in summer, first inspect the air conditioning system, such as checking the refrigerant and whether the air filter is too dirty through the liquid storage tank, whether there are foreign objects in the radiator, etc. Do not turn off the air conditioner immediately after parking: After arriving at the destination, car owners usually turn off the air conditioner and leave the car directly. Unlike in autumn and winter, the huge temperature difference between the inside and outside of the car in hot summer can cause the air conditioning system to become moldy, leading to the growth of mold. Therefore, car owners should turn off the cold air a few minutes before reaching the destination, turn on the natural wind, allow the temperature in the air conditioning pipes to rise, eliminate the temperature difference with the outside, thereby maintaining the relative dryness of the air conditioning system and avoiding mold reproduction.

20

5

Share

How to Replace the Battery in a CS75 Car Key?

There are several steps to replace the battery in a CS75 key, which are as follows: 1. Use a small flat-head screwdriver or a plastic pry tool to gently pry open the remote control shell. Be careful not to damage the internal circuit during the prying process, especially in winter; it is advisable to touch metal to discharge static electricity before operation. 2. For detachable mechanical keys, the mechanical key needs to be removed first. You can use the mechanical key to pry at the gap. Once the gap is pried open, the entire cover can be opened. 3. After opening the remote key cover, you can see the battery, which can then be taken out and replaced. 4. When installing, pay attention to the positive and negative directions. After installing the battery, simply close the key cover.

14

3

Share

Can You Transfer to Another Driving School?

You can transfer to another driving school. The specific process for transferring during driver's license training is as follows: 1. Obtain a transfer certificate: Apply to your current driving school, and after approval, use your ID card to complete the transfer procedures and obtain a transfer certificate. 2. Retrieve your records: Collect your electronic records from the vehicle management office or the driving school. 3. Register: After selecting a new driving school, bring your ID card, electronic records, and transfer certificate to register. 4. Transfer registration: After registration, use your ID card and electronic records to complete the electronic transfer registration at the local vehicle management office. Once the transfer is successful, you can begin your studies and tests.

13

1

Share

What Causes the ABS Warning Light to Illuminate?

ABS warning light can illuminate in various states, each indicating different causes and requiring different solutions. Details are as follows: State 1: ABS warning light stays on (most common). Cause 1: The ABS speed sensor's sensing area is covered by mud, sludge, or other contaminants, affecting its ability to detect the vehicle's speed signal. This prevents the ABS computer from determining the speed and the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt off the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal function. Cause 2: Loose connections in the system wiring or poor contact in the ABS relay can lead to signal issues, causing system failure. Solution: Check the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage may drop below 10.5V. As the engine speed increases, the voltage rises, and the ABS warning light turns off. This can also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; ABS computer malfunction. Solution: Loosen and retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary. Check if the connector gaps have widened. Replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: The ABS computer detects a significant discrepancy between the rear and front wheel speed signals during high-speed driving. This may also occur due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the fuel tank cap label. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and push the brake switch lever down fully with your fingers. Release the brake pedal to complete the self-setting position. Replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, making it difficult for the driver to slow down or adjust the vehicle's trajectory, posing significant safety risks.

19

2

Share

What is the formula for calculating car fuel consumption?

What does the 'R' on tires represent?

What type of engine oil does the Lynk & Co 01 use?

What are the reasons why the Nissan X-Trail air conditioner is not cooling?

How to Replace the Battery in a CS75 Car Key?

Can You Transfer to Another Driving School?

What Causes the ABS Warning Light to Illuminate?

What to Do When Sudden Brake Failure Occurs While Driving?

What are the dimensions of the FAW-Volkswagen Tacqua?

What brand is Greenmax tires?

What does the AST button in the car mean?