···
Log in / Register

What is the Ford tire model?

3 Answers
MiaDella
07/29/25 7:55am
Ford tire model is 205/60R16. The first number 205 represents the tire width of 205MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and 16 stands for the rim diameter of 16 inches. The middle letters or symbols have special meanings: "X" denotes high-pressure tires; "R" and "Z" represent radial tires; "—" indicates low-pressure tires. Maximum speed 193km/h, 0-100km/h acceleration in 7.5 seconds, fuel consumption 12.0L per 100km. In addition to the model, the tire also marks the following common data: Tire cord material: represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire. For practical use, such as "Standard rim 5.00F".
Was this review help?
2
3
Share
LaEvelyn
08/13/25 2:57am
I study cars a lot, and Ford's tire models are really not fixed because they vary completely across different models. Based on my experience, for a truck like the Ford F-150, the factory often uses large sizes like LT275/65R18, which are suitable for off-roading. But for a compact car like the Ford Focus, it usually comes with 195/65R15, offering agility for city driving. You must check the label on your car's B-pillar door, as it indicates the size, including width, aspect ratio, and rim diameter. If the tires don’t match when replacing them, handling will worsen, and it may accelerate tire wear. I also recommend choosing well-known brands like Michelin for good cost-performance—don’t just go for cheap alternatives. Regularly checking tire pressure and wear conditions can also extend their lifespan. Remembering these details can save you from unnecessary trouble. In short, the key is matching the tire model to your car—don’t guess wrong for the sake of fuel efficiency and safety.
Was this review help?
11
1
Share
Expand All
LaPhoebe
10/05/25 3:10am
Having driven for many years, I've changed the tires on my Ford vehicles several times, and the model really depends on the specific car. The ones on my Escape are 225/65R17, while my colleague's Fiesta uses 185/60R15. Can't find the model? Simply check the owner's manual or the sticker on the B-pillar, and you'll know. Wrong sizes might lead to higher fuel consumption or unstable braking, so I recommend consulting a 4S shop—they're familiar with the needs of different models. In daily use, consider your driving environment: opt for wear-resistant tires in the city and comfort-oriented ones for highways. If your budget allows, mid-range brands like Goodyear offer durability without breaking the bank. Don’t overlook the season when changing tires: winter tires are safer in cold months. These small details become second nature with experience. Ensuring the correct model keeps your drive safe and cost-effective.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

How Often Should Internal Engine Cleaning Be Performed?

Engine internal cleaning is generally recommended every six months. Below is relevant information about internal cleaning: Drip Bottle Cleaning Method: Currently, the engine cleaning method adopted by 4S shops is commonly known as the "drip bottle" non-disassembly approach. During cleaning, you only need to inject the cleaning agent into the engine and then use a circulation machine to remove carbon deposits and other debris. This method not only effectively eliminates gum, sludge, deposits, and other contaminants inside the engine but also thoroughly cleans the components of the engine lubrication system, preventing damage from acidic substances and metal shavings. Most importantly, it ensures the optimal performance of the lubricating oil and reduces secondary contamination of new lubricating oil. This is because the engine operates in a high-temperature and high-pressure environment, where engine oil and gasoline inevitably generate carbon deposits and gum over time. Prolonged accumulation of these harmful substances can impair oil fluidity and engine combustion conditions, accelerating engine wear. Generally, engine internal cleaning should be performed every 20,000 kilometers as follows: You can use an engine cleaning agent by pouring it into the oil filler port, running the engine for about 5 minutes, and then draining the oil. If the engine is particularly dirty, first drain the oil, add diesel fuel, disconnect the high-voltage line, and use the starter motor to circulate the mixture for about 2 minutes (avoid exceeding this time to prevent damage to the engine oil seals). Alternatively, you can visit an auto detailing shop for professional cleaning, though labor costs may be higher.
3
3
Share

How much fuel does one bar on the Honda Vezel fuel gauge represent?

One bar on the Honda Vezel fuel gauge represents 2 to 3 liters of fuel. Related information about vehicle fuel consumption is as follows: Methods to reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed; apply gentle acceleration and braking, and brake early; maintain tire pressure at the manufacturer-recommended level, and regularly organize the trunk. Precautions for fuel consumption: Plan your route before driving, check traffic conditions, and try to avoid roads prone to congestion; maintain a steady speed while driving; unstable driving speeds can increase fuel consumption by approximately 6% in suburban areas and 2% in urban areas; avoid carrying unnecessary items in the car to reduce vehicle weight.
5
2
Share

Is the Prado the same as the BaDao?

Prado is the BaDao, which is a mid-to-large-sized SUV. Its body dimensions are: length 4840mm, width 1885mm, height 1890mm, wheelbase 2790mm, front track 1585mm, rear track 1585mm, fuel tank capacity 87L, and body weight 2285kg. The Prado features a double-wishbone independent front suspension and a four-link non-independent rear suspension. It is equipped with a 3.5L naturally aspirated engine, delivering a maximum horsepower of 280PS, maximum torque of 365Nm, and maximum power of 206kW, paired with a 6-speed automatic transmission.
15
1
Share

What is the method to modify a car's odometer?

The method to modify a car's odometer is: 1. Unplug the odometer sensor connector under the car's hood; 2. Insert the output plug of the mileage adjuster into the sensor's signal port; 3. Plug the mileage adjuster into the cigarette lighter; 4. Turn the car key to start the dashboard and adjust the settings on the mileage adjuster; 5. Adjust the speed as needed. The function of the car odometer is to record the total kilometers driven since the car left the factory. Its working principle is based on knowing the diameter of the car's wheels. By calculating the circumference of the wheel, the number of rotations needed to cover one kilometer can be determined. The odometer automatically records the number of wheel rotations and divides it by the rotations corresponding to one kilometer to obtain the total mileage.
7
3
Share

What transmission does the ix25 use?

ix25 uses a 6-speed manual transmission and a CVT transmission. Taking the 2020 manual fashion ix25 as an example, its body length, width and height are: 4300mm, 1790mm, 1620mm, the wheelbase is 2610mm, the fuel tank capacity is 50l, and the body weight is 1150kg. The 2020 manual fashion ix25 is a MacPherson independent suspension, the rear suspension is a torsion beam non-independent suspension, equipped with a 1.5t naturally aspirated engine, the maximum horsepower is 115ps, the maximum power is 84.4kw, the maximum torque is 143.8nm, matched with a 6-speed manual transmission.
16
2
Share

What is the low ash engine oil designation?

Low ash engine oil is designated as API SP grade. The functions and usage precautions of engine oil are as follows: Functions of engine oil: Separate the relatively sliding parts to reduce wear, bring heat back to the oil tank and then dissipate it into the air to help the radiator cool the engine; circulate carbon deposits, sludge, and worn metal particles on engine parts back to the oil tank, and flush away dirt generated on the working surfaces of parts through the flow of lubricating oil. Precautions for using engine oil: The selection of engine oil should be based on the requirements of the engine, and the oil should match the engine. Multi-grade oil should be selected as it has advantages such as fuel economy, long service life, and high efficiency, providing better protection for the engine; when refueling, the oil quantity should be slightly lower than the scale on the dipstick, and do not overfill.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.