What is the following distance when visibility is 200 meters in foggy weather?

1 Answers
OMartin
07/29/25 11:51pm
When visibility on the highway is less than 200 meters, maintain a distance of more than 100 meters from the vehicle ahead in the same lane. The speed should not exceed 60 kilometers per hour, and fog lights, low beams, position lights, and front and rear position lights should be turned on. Here is some additional information: 1. Less than 100 meters: When visibility is less than 100 meters, turn on fog lights, low beams, position lights, front and rear position lights, and hazard warning flashers. The speed should not exceed 40 kilometers per hour, and maintain a distance of more than 50 meters from the vehicle ahead in the same lane. 2. Less than 50 meters: When visibility is less than 50 meters, turn on fog lights, low beams, position lights, front and rear position lights, and hazard warning flashers. The speed should not exceed 20 kilometers per hour, and exit the highway as soon as possible from the nearest exit.
Was this review help?
1
1
Share
More Forum Discussions

How Many Years Can Car Tires Last?

Car tires can last up to 6 years. Here are some details about car tires: 1. Tire wear and aging: This is closely related to the vehicle's usage and environmental conditions. It's not possible to definitively determine how often tires must be replaced, but you can at least decide whether they need replacement based on your own judgment. There is a wear limit—simply put, small ridges appear periodically in the tire tread grooves. 2. Timely replacement: When tires have worn to their limit, they should be replaced immediately. Continuing to use them compromises traction, leading to longer braking distances and increased risk of skidding in wet conditions.
9
1
Share

How to Use Rearview Mirrors?

Rearview mirrors should be adjusted to view the left and right positions of the center rearview mirror. Below are some instructions on how to use rearview mirrors: 1. Center rearview mirror: Adjust the left and right positions of the center rearview mirror so that the left edge of the mirror just cuts off your right ear in the reflection, and position the distant horizon in the center of the mirror. 2. Viewing angles: For the left side mirror, position the distant horizon in the center when adjusting the lower part, and adjust the left and right positions so that the car body occupies 1/4 of the mirror's area. For the right side mirror, leave a larger ground area, about 2/3 of the mirror's area, when adjusting the upper and lower positions. As for the left and right positions, similarly adjust so that the car body occupies 1/4 of the mirror's area.
5
1
Share

What to Do When There Is Green Powder on the Negative Terminal of a Car Battery?

Green powder on the negative terminal of a car battery occurs because the negative terminal gradually changes from pure lead to lead oxide during operation, resulting in the formation of green powder. Below are the relevant explanations: 1. Principle of Formation: When different metals come into contact, electrochemical reactions occur due to the diffusion of electrons, which is a normal chemical phenomenon. To prevent corrosion of the battery terminals, both the positive and negative terminals and the connectors are made of pure lead to minimize corrosion. Due to electron transfer during the battery's charging and discharging processes, over time, the negative terminal changes from pure lead to lead oxide, leading to the appearance of blue-green powder. 2. Solution: Remove the terminal, spray an alkaline cleaning agent on the lead terminal and wire connector, and wipe them clean. Use a wrench to tighten the wire connector onto the terminal. To avoid sparks, ensure all vehicle electronics and ignition are turned off before removing the battery terminals, and always remove the negative terminal first, followed by the positive terminal. When reinstalling the terminals, attach the positive terminal first, then the negative terminal.
17
0
Share

Should Cars Be Waxed?

Yes, cars should be waxed. Here are some key points about car waxing: 1. Benefits: Proper waxing significantly enhances the protection level of the car's paint surface. It not only makes the paint less susceptible to damage and slows down the aging process, but also helps to some extent in preventing the paint from getting dirty. 2. Precautions: Incorrect waxing frequency or methods can cause some irreversible damage to the car's paint. Generally, new cars come with a layer of protective wax on their paint when they leave the factory. Waxing too early may remove this original protective wax from the new car's surface.
10
2
Share

How Long Does a Turbocharger Generally Last?

The lifespan of a turbocharger can generally last around 250,000 kilometers. For example, the design lifespan of the Citroen 1.6T is approximately 10 years or 240,000 kilometers, while the General Motors 1.4T has a design lifespan of about 250,000 kilometers. The lifespan of both the turbocharger and the engine is significantly influenced by maintenance, with the turbocharger being particularly affected. Here is some related information: 1. Turbocharger: A turbocharger consists of two parts: a compression turbine and an exhaust turbine. The working principle of a turbocharged engine is quite simple. When the engine reaches a certain speed, the exhaust gases have enough energy to spin the exhaust turbine, which in turn spins the compression turbine. This allows the compression turbine to compress air and blow it into the cylinders. 2. Precautions: After driving a car with a turbocharged engine at high speeds or on a long-distance trip, it is advisable not to turn off the engine immediately. Instead, let the engine idle for a few minutes to help cool down the turbocharger.
4
3
Share

Brief Description of the Causes of Drive Axle Oil Leakage

Drive axle oil leakage is caused by loosening or damage. Below are some of the fault causes: 1. Loosening: Drive axle loosening may be due to loose oil filler or drain plugs; worn or hardened oil seals, oil seals installed in reverse, misalignment between the oil seal and shaft neck, or grooves worn into the shaft neck. Additionally, the drive axle must withstand vertical forces, longitudinal and lateral forces acting between the road surface and the frame or body, as well as braking torque and reaction forces. 2. Damage: Drive axle damage may be caused by damaged fastening screws; blocked ventilation holes; casting defects or cracks in the axle housing; excessive gear oil leading to increased internal pressure during operation, causing gear oil to seep out, etc.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.