···
Log in / Register

What is the fog light bulb model for the Volkswagen Lamando?

4 Answers
MacCameron
09/04/25 7:57am

The fog light bulb model for the Volkswagen Lamando is H3. Fog lights generally refer to automotive fog lights. Automotive fog lights are installed at the front and rear of the vehicle to illuminate the road and provide safety warnings during rainy or foggy driving conditions, enhancing visibility for the driver and other road users. Introduction to automotive fog lights: In adverse weather conditions such as fog, snow, heavy rain, or in environments filled with smoke or dust, vehicles must use front fog lights to illuminate the road ahead and ensure driving safety. In recent years, fog lights have often been integrated into the front bumper in terms of design. Classification of automotive fog lights: Based on installation location, they can be divided into front fog lights and rear fog lights. Based on the principle of illumination, they can be categorized into gas fog lights and LED fog lights. Audi has recently developed a laser fog light.

Was this review help?
14
0
Share
VonValerie
09/17/25 2:02am

As an owner of the Volkswagen Lamando, I once discovered that the fog lights weren't working during rainy weather. After taking it to a repair shop for inspection, I learned that the bulb had burned out. The model is H8, which comes as standard equipment. The replacement process is quite simple: locate the fog light position under the front bumper, remove the cover, pull out the old bulb, and insert the new one. H8 bulbs can be purchased online for just a few dozen yuan. Opting for a reputable brand like Osram ensures better durability. The yellow light from fog lamps has strong penetration, making driving in foggy conditions much safer. Regular checks can prevent sudden failures, and I recommend fellow car owners replace them once before winter. Using the wrong model can result in weak lighting or even damage to the wiring, so always verify with the manual or consult a professional shop. I later learned to replace them myself, saving on labor costs, but it's best to have a technician guide you the first time to avoid damaging the socket.

Was this review help?
3
3
Share
Expand All
StMicah
10/31/25 2:33am

After years of car repair experience, I've often encountered Volkswagen Lamando fog light issues caused by burnt-out H8 bulbs. Most Volkswagen models use this bulb type for front fog lights, with a power rating around 35 watts. When replacing, first disconnect the power to prevent electric shock, then use a small screwdriver or special tool to remove the lamp cover and replace the old bulb with a new one. Remember to test if the brightness is normal. The H8 bulb has good compatibility, but there are counterfeit products on the market with insufficient brightness - it's recommended to buy from reputable manufacturers. Fog lights are designed with yellow light to improve visibility in foggy conditions, and using the wrong bulb type may cause overheating or failure. After replacement, check for oxidation at the wiring contacts to ensure safe driving in rainy weather. While DIY replacement isn't difficult, beginners might find it more convenient to visit an auto parts store.

Was this review help?
2
3
Share
Expand All
JuliannaMarie
12/14/25 2:41am

I enjoy studying the details of Volkswagen cars, and indeed, the front fog light bulb for the Lamando is the H8 model. This standard is quite common across the Volkswagen family, as the yellowish light from fog lamps penetrates mist more effectively. When replacing, pay attention to the H8 marking on the original bulb to avoid counterfeit products that may result in dim lighting or short circuits. Regular maintenance, such as cleaning the lamp cover to prevent dust buildup, can extend the bulb's lifespan to several years. Fog lights are indispensable in harsh weather, and once the model is confirmed, DIY replacement is straightforward with plenty of online tutorials available. I've also noticed that the brightness of H8 bulbs is adjustable, and opting for a high-brightness version during modifications can be more practical.

Was this review help?
6
5
Share
Expand All
More Forum Discussions

How to reset after replacing brake pads on BMW X1?

The method to reset after replacing brake pads on BMW X1 is: 1. Close the door and turn on the key; 2. Press and hold the black button at the lower left corner of the instrument panel until the oil or brake pad indicator appears; 3. When a triangle symbol appears in the middle, do not release the button; 4. When the brake pad indicator appears, release the button and press and hold it again. It will display RESET or reset. At this time, release and press and hold again to complete the reset. The BMW X1 is positioned as a compact SUV, with body dimensions of 4454mm in length, 1798mm in width, and 1545mm in height, a wheelbase of 2760mm, a fuel tank capacity of 63L, ventilated disc brakes, and a maximum speed of 295 kilometers per hour.
18
2
Share

What does the 'folder' in the car mean?

The 'folder' in the car refers to a physical folder. Additionally, there are several other buttons in the car: 1. The 'SEL' button is a menu selection confirmation button, usually located on the multifunction steering wheel; 2. The 'AC' button is the compressor switch, which is the air conditioning cooling switch; 3. 'MUTE' is the mute button for instant silencing; 4. 'MODE' is the mode switching button; 5. 'SET' on the multifunction steering wheel is the cruise control function button; 6. The button with an 'A' circled and 'off' below it is the auto start-stop function switch, which can be pressed to turn the engine auto start-stop function on or off.
2
5
Share

How to Remove a Car Steering Wheel?

To remove a car steering wheel, follow these steps: 1. Adjust the steering wheel angle by turning it 90 degrees; 2. Position the screwdriver - when the hole behind the steering wheel is at the top, insert a flat-head screwdriver horizontally along the top edge of the opening; 3. The screwdriver will now be above a horizontal wire, which needs to be pressed downward; 4. Remove the airbag by gently pulling it outward; 5. Repeat the same process on the other side to complete the steering wheel removal. The steering wheel's function is to convert the force applied by the driver on the wheel's edge into torque, which is then transmitted to the steering column. It mainly consists of a frame, foam padding, and mounting clips or screw holes corresponding to the driver's airbag (DAB).
17
3
Share

What Components Does the Valve Train Include?

The valve train includes components such as valves, valve guides, valve seats, valve locks, and valve springs. The valve train (internal combustion engine valve train) operates according to the working cycle and ignition sequence requirements of each cylinder in the engine. It precisely times the opening and closing of the intake and exhaust valves for each cylinder, ensuring that fresh combustible mixture (for gasoline engines) or air (for diesel engines) enters the cylinders in a timely manner, and exhaust gases are promptly expelled from the cylinders. The valves are specifically responsible for introducing air into the engine and expelling the post-combustion exhaust gases. Structurally, they can be categorized into intake valves and exhaust valves.
8
2
Share

What is the relationship between Venucia and Dongfeng Nissan?

Venucia and Dongfeng Nissan have a technical cooperation relationship. Taking the Venucia D50 as an example: The manufacturer of this car is Dongfeng Nissan Venucia, its class is a compact car, the engine is a 1.6L L4, the intake form is naturally aspirated, the maximum horsepower is 117ps, the maximum torque is 153nm, and the top speed is 185 kilometers per hour. The car's length, width, and height are 4480mm, 1695mm, and 1535mm respectively, the wheelbase is 2600mm, the body type is a 4-door 5-seater sedan, the transmission is a 5-speed manual, the drive method is front-wheel drive, the steering assistance type is electric power, and the body structure is a unibody.
5
4
Share

What is Indirect Tire Pressure Monitoring?

Indirect tire pressure monitoring uses wheel speed sensors to compare the rotational speeds of the tires to determine if there is any abnormality in tire pressure. If a monitoring fault is detected, it is likely due to a problem with the wheel speed sensor or poor internal contact. Reasons for the tire pressure monitoring light to illuminate include: 1. The tire pressure monitoring light may come on due to a punctured tire; 2. Sometimes, the tire pressure monitoring light illuminates because the tire pressure is too high; 3. Driving with low tire pressure for an extended period can also cause the tire pressure monitoring light to turn on. Indirect tire pressure monitoring devices essentially utilize the speed sensors in the car's ABS braking system to compare the rotation counts of the four tires. If one tire has lower pressure, its rotation count will differ from the others. By using the same sensors and signals as the ABS system, the vehicle's computer can adjust the software to establish a new function in the driving computer, warning the driver that one tire has lower pressure compared to the other three.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.