···
Log in / Register

What is the first maintenance time for a new car?

1Answers
OscarRose
07/29/2025, 07:25:55 AM

New car first maintenance time is 3-5 months, first maintenance mileage is 3000-5000 kilometers. The following introduces the benefits of maintenance: Ensure vehicle safety: A car consists of tens of thousands of components. With use, the performance of functional components (including lubricants) gradually decreases due to wear, aging, corrosion, etc. During normal vehicle operation, this change gradually occurs in many components. Because no two cars are used exactly the same way, it is impossible to predict that every component will wear and age identically. Therefore, periodic inspections allow adjustments and replacements for components expected to change over time or use, ensuring driving safety. Extend vehicle lifespan: Adjusting and replacing components that are expected to change over time or use is called "regular maintenance." Its purpose is to restore the vehicle's performance to optimal condition, prevent small issues from becoming major problems, ensure vehicle safety, and achieve better economy and longer service life. Therefore, car maintenance is essential.

Was this review help?
107
Share
More Q&A

How to deactivate the 4LO mode on the Land Cruiser Prado?

First, press and hold the brake pedal, then shift into Neutral (N) gear. Lift the first knob (leftmost) among the four levers in front of the center console from left to right. The warning light will disappear after 3 seconds.
118
Share

What are the correct steps for parking an Audi vehicle?

Moderately press the driver's brake pedal. Park the vehicle on a safe road surface. Shift the automatic transmission lever to the P (Park) position, which is the parking gear of the transmission. Press the one-touch start button to turn off the vehicle's power. Engage the electronic parking brake of the FAW Audi A5 to ensure the vehicle remains stationary even on a slope.
101
Share

What are the differences between Mercedes-Benz A-Class and C-Class?

The differences between A-Class and C-Class are as follows: 1. The A-Class is a compact car, while the C-Class is a mid-size sedan. 2. The Mercedes-Benz C-Class is equipped with an automatic transmission, while the A-Class comes with a dual-clutch transmission. In terms of engine displacement options, the C-Class offers more choices. 3. Regarding fuel consumption, the C-Class has a relatively higher fuel consumption, with a combined fuel consumption of around 8.5L per 100km, whereas the A-Class has a combined fuel consumption of approximately 6.5L per 100km. Below is some additional knowledge about Mercedes-Benz: 1. Mercedes-Benz models include: S-Class, E-Class, C-Class, G-Class, GL-Class, M-Class, CL-Class, GLK-Class, A-Class, B-Class, SL-Class, SLK-Class, and SLS (including the classic SLR). The S-Class is the highest level. 2. The E-Class is one level below the S-Class and belongs to the mid-to-large-size car category. 3. The C-Class is one level below the E-Class and belongs to the small-to-mid-size car category. 4. Mercedes-Benz is a German automobile brand, considered one of the most successful premium car brands in the world. It is renowned for its perfect technical level, rigorous quality standards, innovative capabilities, and a series of classic coupe models.
103
Share

Why is the car air conditioning not responding?

There are several reasons why the car air conditioning may not be responding: 1. Blower motor failure: The car blower motor is a crucial component for air conditioning airflow. If the air conditioning compressor fails during use, the car air conditioning will definitely not blow air. Overheating damage to the internal coil or capacitor failure of the blower motor are common causes of blower motor failure. You can turn the car air conditioning to maximum and listen for the sound of the blower motor. If it is confirmed to be a blower motor issue, it needs to be addressed at a 4S shop, as it is difficult to resolve on your own. 2. Clogged air filter: A clogged air filter is another common reason for no airflow from the air conditioning. During operation, the car air conditioning absorbs many impurities from the air, leading to filter blockage. If the air conditioning is not blowing air, you can remove the air filter and check if it is clean. If the filter is too dirty, it should be replaced promptly. You can go to a 4S shop or a repair shop, or replace it yourself if you can handle it. 3. Control system failure: If the blower motor and air filter are not the causes of the air conditioning not blowing air, it may be due to a malfunction in the air vent, air conditioning computer, or control switch. Control system switches generally do not fail often. It is recommended that the owner visit a 4S shop for inspection, as this will make the process simpler.
105
Share

How to Turn Off the Distance to Next Maintenance Reminder

Press and hold the "Reset Button 5" while turning off the ignition switch with your other hand. Continue holding "Reset Button 5" until the clock and mileage on the instrument panel completely disappear (the panel should display nothing, showing a black screen), then release the button. Press and hold "Reset Button 5" again, then turn the ignition switch back on. Keep holding "Reset Button 5" without releasing it until the maintenance reminder stops flashing, then release the button. Turn the ignition switch back on or start the vehicle to check if the reset was successful.
119
Share

What does the key symbol on the dashboard mean?

Dashboard displaying a key symbol indicates the anti-theft system warning light. If the light is on, the vehicle cannot be started. Vehicle anti-theft indicator lights include both factory-installed anti-theft indicators and aftermarket alarm system indicators. The anti-theft indicator has armed and disarmed states, with different blinking frequencies for each state, causing the light to flash in a regular pattern. Additional information: 1. Working principle: The car ignition key contains an electronic chip with a unique fixed ID. To start the vehicle, the key chip's ID must match the engine-side ID. 2. Solution: Manually lock the driver's side door, press the "lock" button on the remote once to input the ID into the computer, then open the driver's side door to exit ID input mode.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.