What is the first maintenance time and mileage for the Audi A3?

How Long Does It Take for an Imported Car to Be Considered a Stock Car?

An imported car is considered a stock car if it has been in storage for more than half a year. Here is a related introduction to stock cars: 1. Definition of a stock car: Parallel imported cars take up to 3 months to arrive at the port from the factory abroad, depending on the location of the foreign factory, such as the United States, Canada, Europe, or the Middle East. However, delays in customs clearance at the port can prolong this time. Therefore, if an imported car has been in storage for more than 6 months from the date of manufacture, it is considered a stock car. 2. Tips for identifying a stock car: The manufacturing date marked on the engine compartment nameplate indicates the actual storage time of the car. An imported car with a storage time exceeding 6 months can be classified as a stock car. Additionally, if there are obvious signs of aging on parts such as the wipers, engine belts, or tires, the car can also be considered a stock car.

14

1

Share

What does traffic law code 1345 mean?

Traffic violation code 1345 refers to the illegal act of a motor vehicle driving in violation of prohibition signs or prohibition line instructions. Below is a detailed introduction to traffic violation codes: 1. Meaning of violation codes: Traffic violation codes are a set of encoding regulations established by the Ministry of Public Security for traffic violations committed by motor vehicles and pedestrians. 2. First digit code: The behavior code consists of numbers 1 to 5 and 7, 8. 1 indicates motor vehicle passage, 2 indicates non-motor vehicle passage, 3 indicates pedestrian or passenger passage, 4 indicates highway passage, 5 indicates other regulations, 7 indicates implementation rules of provinces, autonomous regions, or municipalities directly under the central government, and 8 indicates local regulations of cities (regions, autonomous prefectures, or leagues). 3. Second digit code: The point deduction classification code consists of numbers 0, 1, 2, 3, 6, and 7. 0 indicates no points deducted, 1 indicates 1 point deducted, 2 indicates 2 points deducted, 3 indicates 3 points deducted, 6 indicates 6 points deducted, and 7 indicates 12 points deducted.

17

5

Share

What to Do When the Clutch and Throttle Are Not Well Coordinated?

Engine power is transmitted from the clutch to the wheels, with the reaction distance on the clutch pedal being only about 1 cm. Therefore, after depressing the clutch pedal and engaging the gear, when lifting the clutch pedal to the point where the clutch friction plates begin to make contact, the foot should pause briefly at this position while simultaneously applying the throttle. Once the clutch plates are fully engaged, the clutch pedal can be completely released. Below is an introduction to the clutch and throttle: 1. Clutch: The clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. During driving, the driver can depress or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the engine's power to the transmission. 2. Throttle: The throttle, also known as the 'accelerator' or 'throttle valve,' is the control device that regulates the engine's power (thrust). In piston aircraft engines, the throttle controls the carburetor's throttle opening to regulate the cylinder's filling volume, thereby determining the engine's output power.

15

3

Share

What does the yellow P light mean?

The yellow P on the car dashboard indicates that the parking brake is engaged, meaning the handbrake is in the braking position. Below are the specific reasons why the P light remains illuminated in yellow: 1. Handbrake not fully released: Some drivers forget to release the handbrake or do not release it completely, causing the handbrake light to turn on. 2. Brake fluid leakage: It is necessary to check the brake fluid, as leakage or insufficient brake fluid may cause the handbrake light to illuminate. The braking system mainly consists of energy supply devices, control devices, transmission devices, and brakes. The primary function of the braking system is to slow down or stop a moving car, maintain a stable speed for a car going downhill, and keep a parked car stationary. Using a fault detection device for inspection can quickly and accurately locate the fault and identify the cause step by step. 3. Worn brake discs: Accompanied by body vibration or abnormal noises when braking, it is likely due to thinning brake discs or foreign objects entering the brake pads. Uneven surfaces on the brake discs can cause sharp metal friction sounds when braking, as well as insufficient braking force, longer braking distances, and softer braking.

19

1

Share

Reasons for Car Shaking and Abnormal Noises

Car shaking and abnormal noises are caused by friction between the car door and the frame, or shaking, or friction between steel plates due to welding failure. Additionally, loose fastening between car body components can also lead to abnormal noises. Below is a detailed introduction to car shaking and abnormal noises: 1. The cause of abnormal noises in the car engine should be determined based on the sound: a. A sharp belt squealing noise is caused by belt slippage; b. A sharp metal-on-metal friction sound during engine operation indicates damage to the generator, water pump, or power steering pump bearings; c. A hissing sound during engine operation may be due to a blocked exhaust system, vacuum tube leakage, or breakage. 2. Tire noises: When car tires come into contact with the ground, various noises of different intensities are produced depending on the type of road, surface irregularities, car speed, tire type, and tire air pressure. If the tire noise is rhythmic and increases in frequency with speed, the cause can be determined by the sound. A dull "thud" sound often indicates tire tread deformation, bulging, severe wear, or insufficient air pressure. A "clicking" sound may be caused by small stones stuck in the tread. 3. Suspension noises: Suspension components are not only related to ride comfort but also to driving safety. When passing over speed bumps or uneven roads, suspension noises can be very severe. A "thumping" or "clunking" noise on flat roads is usually caused by shock absorber issues or loose suspension components. 4. Engine guard noises: Screws on frequently moving parts of the car often shift. If you frequently hear a "rattling" noise near the grille area, aside from the grille being loose, the owner should also check if the engine guard screws are loose or if the engine guard is loose against the underbody. Besides tightening the screws, placing cardboard-like materials in the noisy area can help eliminate the noise.

2

1

Share

What engine does the Volkswagen Passat have?

The Passat engine is produced by FAW-Volkswagen Engine (Dalian) Co., Ltd., manufactured at the Dalian Powertrain Plant. The Passat 2.0T engine model is EA888, with a maximum power of 162kW and maximum torque of 350Nm. The 1.4T engine model is EA211, with a maximum power of 137kW and maximum torque of 320Nm. For daily maintenance of the Passat engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, bypassing through the relief valve and carrying contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. Small amounts remain suspended in the oil, while large amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.

12

3

Share

What is the first maintenance time and mileage for the Audi A3?

How Long Does It Take for an Imported Car to Be Considered a Stock Car?

What does traffic law code 1345 mean?

What to Do When the Clutch and Throttle Are Not Well Coordinated?

What does the yellow P light mean?

Reasons for Car Shaking and Abnormal Noises

What engine does the Volkswagen Passat have?

Should the Negative Terminal of the Car Battery Be Disconnected When the Car Is Not Used for a Long Time?

How to Handle Traffic Violations with 0 Points and 0 Fine?

Reasons for Rapid Rise in Car Engine Temperature

Where is the car air conditioning cooling button located?