What is the first maintenance mileage requirement for the Hongqi HS5?

2 Answers
FernandoLee
07/24/25 2:18am
The first maintenance requirement for the Hongqi HS5 is 3,000 kilometers. Key items: The main items for the first maintenance of a new car are changing the engine oil and oil filter. Therefore, some dealerships may offer significant discounts to sell the vehicle, but essentially no one would purchase it under such circumstances. Reason: Since the period before the first maintenance is the vehicle's break-in period, the gradually breaking-in engine will continuously mix mechanical impurities such as dust, metal wear, and carbon deposits into the engine oil. Driving at high speeds during this period can lead to abnormal engine wear. If the debris and impurities generated by the engine operation are not promptly removed, they may cause abnormal damage to the internal parts of the cylinders.
Was this review help?
18
3
Share
DeVivian
08/10/25 9:57pm
Driving the Hongqi HS5, I didn’t pay much attention to the first service mileage at first. Later, after checking the owner’s manual, I learned that the requirement is 5,000 kilometers or 6 months, whichever comes first. Getting the first service done on time not only includes a free oil and filter change but also checks the engine, brakes, and suspension system, preventing small issues from becoming big ones. In daily use, I always remind my friends not to slack off, as neglecting maintenance can affect the car’s performance and waste fuel money. Regular maintenance is like adding a health guarantee—safe and cost-effective. Now, every few thousand kilometers, I glance at the odometer to ensure I don’t exceed the limit, forming a good habit.
Was this review help?
7
4
Share
Expand All
More Forum Discussions

Wiper Switch Gear Symbols and Their Meanings

Wiper Switch Gear Symbols and Their Meanings include the following types: 1. Front wiper mist wipe. When the lever is in the MIST position and released, it automatically returns to the OFF position, and the front wiper performs a mist wipe operation. 2. Front wiper off. When the lever is in the OFF position, the front wiper is turned off. 3. Front wiper auto wipe. When the lever is moved to the INT position, the front wiper performs an intermittent wipe operation. At this time, the wiper control system adjusts the wiping speed according to the intermittent wiper sensitivity adjustment knob. 4. Front wiper low-speed wipe. When the lever is moved to the LO position, the front wiper performs a low-speed wipe operation. 5. Front wiper high-speed wipe. When the lever is moved to the HI position, the front wiper performs a high-speed wipe operation.
10
4
Share

Can I switch back to 92 after using 95?

If a car that normally uses 95-octane gasoline wants to switch back to 92-octane, it must be ensured that the car can use 92-octane fuel. Otherwise, issues such as insufficient power may occur. The relevant introduction to gasoline is as follows: Appearance: The English name for gasoline is Gasoline/Petrol. It appears as a transparent liquid, is flammable, and mainly consists of C5-C12 aliphatic hydrocarbons and cycloalkanes, along with a certain amount of aromatic hydrocarbons. Gasoline has a high octane number (anti-knock combustion performance). Gasoline grades: Gasoline is classified into grades such as 90, 93, 95, and 97 based on octane levels. Starting from January 2012, the gasoline grades 90, 93, and 97 were revised to 89, 92, and 95. Gasoline composition: Gasoline is produced by refining different gasoline components obtained from petroleum refining, such as straight-run gasoline components, catalytic cracking gasoline components, and catalytic reforming gasoline components, and blending them with high-octane components. It is mainly used as fuel for spark-ignition internal combustion engines in automobiles.
10
5
Share

Does Half Fuel Gauge Mean Half Tank?

Half fuel gauge does not mean half tank. It is less than half tank. Here are several methods to reduce fuel consumption: 1. Start slowly. When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. 2. Light acceleration, light braking, and early braking. While driving, press the accelerator lightly, avoid sudden increases in engine speed, and prevent the car from shaking during driving to make the car more fuel-efficient. 3. Maintain proper tire pressure. Keep the tire pressure at the level recommended by the manufacturer. 4. Regularly organize the trunk to reduce weight. Frequently check if there are unnecessary items in the trunk. 5. Close the windows. Driving with windows open increases wind resistance, and greater wind resistance means more resistance for the car, requiring more power and thus increasing fuel consumption. 6. Regularly maintain the vehicle or perform inspections. Timely oil changes can reduce carbon buildup. 7. Replace fluids on time. Change engine oil and transmission fluid regularly.
19
0
Share

What is a Pre-tensioner?

Pre-tensioner introduction is as follows: 1. The pre-tensioner tightens the seat belt during the initial phase of moderate to severe frontal collisions, near-frontal collisions, or rear-end collisions. 2. For vehicles equipped with side-impact airbags and roof curtain airbags, the seat belt pre-tensioner can assist in tightening the seat belt during side collisions or rollover accidents. The control devices for pre-tensioning retractors are divided into two types as follows: 1. Electronic control device. The electronic control unit (ECU) detects abnormal changes in the vehicle's acceleration, processes the signal through the computer, and sends it to the retractor's control device to activate the pre-tensioning device. This type of pre-tensioning seat belt is usually used in combination with auxiliary airbags. 2. Mechanical control device. The sensor detects abnormal changes in the vehicle's acceleration, and the control device activates the pre-tensioning device. This type of pre-tensioning seat belt can be used independently.
6
1
Share

Why is it not recommended to install tire pressure monitoring for new cars?

Most new cars basically come with original tire pressure monitoring devices, and some models even have tire pressure warning devices. Tire pressure monitoring is not a real-time monitoring function. If there is an abnormality in the tire, information will be automatically displayed on the dashboard. The displayed content does not have specific values, only indicating which tire has a problem. The working principle of tire pressure monitoring is: Using pressure sensors installed in the tires to measure the tire pressure, and using wireless transmitters to send the pressure information from inside the tire to the central receiver module. How to eliminate the tire pressure alarm: There is a tire monitoring indicator button on the central console. After the system issues a low tire pressure warning, the car must remain stationary for about one minute. Do not move the car or turn off and restart the ignition switch until the button is pressed to recalibrate the tire monitoring indicator. Find the tire pressure reset option in the settings on the central display. If none of the above methods work, you need to go to a 4S shop to eliminate the tire pressure alarm. What to do if the tire pressure is insufficient: If no damage is visible, you can directly inflate to the normal tire pressure and reset the tire pressure system. If the tire is found to be punctured during inspection, you need to drive to a tire shop promptly for repair and then reinflate. If the tire pressure is still indicated as insufficient after inflation for a while, but there is no puncture in the tire, it may be due to air leakage caused by wheel hub deformation. It is recommended to check the wheel hub and replace it.
16
5
Share

What items are included in a car first aid kit?

A car first aid kit mainly contains dressing supplies such as elastic head covers, buckle-type tourniquets, elastic bandages, etc., sterile dressings like gauze, bandages, disposable gloves, etc., and tools such as first aid scissors, medical tweezers, safety pins, and life-saving whistles. Precautions for car first aid kits: 1. Ensure proper sealing: The items in the car first aid kit must be properly sealed, especially waterproofing. Once water gets in, the first aid supplies will certainly be affected and may even become unusable, which could be problematic in an emergency. 2. Regularly check expiration dates: If medications are unused for a long time, make sure to check their expiration dates. Expired items should be promptly discarded and never reused, as this could worsen the situation rather than alleviate it.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.