What is the first maintenance mileage for Volvo?

1 Answers
LeEli
07/24/25 6:28pm
Volvo XC60's maintenance manual specifies the first maintenance at 3,000 kilometers or 3 months. During the break-in period, as the gears of the engine, transmission, etc., have not yet fully smoothed out, it is generally advised not to drive too fast—absolutely do not exceed 100 km/h, and it's best not to exceed 80 km/h. Below is some relevant information about the Volvo XC60: 1. This sport utility vehicle combines the performance of an off-road vehicle with the personality of a sports car, designed specifically for young elites who pursue sporty characteristics. 2. While inheriting the traditional design genes of the Volvo family, the designers have boldly innovated on the car's exterior, with unconventional interior design; it is also equipped with the world's first City Safety system, ensuring high safety. 3. The launch of the new Volvo XC60 further highlights Volvo Cars' strength as a luxury automotive brand and its exceptional taste.
Was this review help?
12
2
Share
More Forum Discussions

What is the proper oil level position?

Engine oil should be maintained between the min and max marks on the dipstick. Overfilling engine oil may cause it to enter the combustion chamber during driving, leading to increased carbon deposits in the combustion chamber. This raises piston movement resistance and reduces engine power. The functions of engine oil are: 1. To alleviate friction and high temperatures; 2. To reduce gas leakage and prevent external contaminants; 3. To prevent contact between water, air, acidic harmful gases and engine components. The oil change procedure is: 1. Lift the vehicle and remove the underbody protection panel; 2. Place an oil container under the oil pan and loosen the drain plug; 3. After draining the oil, replace the oil filter and apply a layer of oil around it; 4. Tighten the drain plug, reinstall the protection panel, lower the vehicle, and pour in the new engine oil.
4
3
Share

What is the working principle of an automotive turbocharger?

Automotive turbocharger works by converting the power generated from exhaust gases into intake pressure. There are fan blades in both the exhaust and intake pipes. When the engine operates and produces exhaust gases, the blades in the exhaust pipe rotate, thereby increasing the intake pressure. As the throttle is pressed harder, exhaust increases, and the intake increases correspondingly with the exhaust. The maintenance methods for a turbocharger include: 1. After starting the car engine, do not abruptly press the accelerator pedal; 2. Do not immediately turn off the engine after prolonged high-speed operation; 3. Choose the appropriate engine oil; 4. Regularly clean the engine oil and filter; 5. Clean the air filter on time; 6. Periodically check the sealing rings of the turbocharger; 7. Regularly clean the air filter; 8. Periodically inspect the lubrication oil pipes and joints.
9
5
Share

What is the fuel consumption of the Camry 2.5G Luxury Edition?

The fuel consumption of the Camry 2.5G Luxury Edition is 6 liters per 100 kilometers. The method to calculate fuel consumption is as follows: fill up the fuel tank when refueling and start counting the mileage. The next time you refuel, fill up the tank again. Then, divide the amount of money spent on fuel by the fuel price to get the number of liters consumed. Divide the number of liters by the mileage and multiply by 100 to obtain the fuel consumption per 100 kilometers. Taking the Camry 2.5G Luxury Edition as an example, its front suspension is a MacPherson independent suspension, and the rear suspension is an E-type multi-link independent suspension. It is equipped with a 2.5L naturally aspirated engine, with a maximum horsepower of 209 PS, a maximum power of 154 kW, and a maximum torque of 250 Nm. It is paired with an 8-speed automatic transmission.
11
1
Share

What are the causes of excessive oil consumption?

The causes of excessive oil consumption include: 1. Wear or damage to piston rings, misalignment or incorrect installation of piston rings; 2. Excessive clearance between pistons and cylinder walls; 3. Excessive wear of the intake valve guide; 4. Oil leakage in the oil circuit; 5. Excessive engine speed. The functions of engine oil are: lubrication, auxiliary cooling, cleaning, sealing and leak prevention, rust and corrosion prevention, shock absorption, and anti-wear. The method for adding engine oil is: 1. Lift the car, remove the undercover, and place a container of about 10 liters under the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow into the oil filler port for two minutes, tighten the oil drain plug after draining, and wipe with a paper towel to check for leaks; 3. Reinstall the undercover and lower the car, then use a funnel to add oil through the filler port.
13
2
Share

How long can a Volkswagen dry dual-clutch transmission last under normal conditions?

The lifespan of Volkswagen's dry dual-clutch transmission depends on the vehicle's usage conditions, with the longest service life potentially exceeding ten years. Additional information: 1. Volkswagen vehicles use two types of dual-clutch transmissions: dry dual-clutch and wet dual-clutch. Identifying which type is used in a Volkswagen model is very simple—just check the badge at the rear of the vehicle. 2. Models with 230 or 280 badges at the rear use a dry dual-clutch transmission, while those with 330 or 380 badges use a wet dual-clutch transmission. Different engine displacements are paired with different types of transmissions. 3. Compared to wet dual-clutch transmissions, dry dual-clutch transmissions have lower production costs, smaller size, simpler structure, and higher transmission efficiency. However, dry dual-clutch transmissions tend to heat up during operation. 4. During operation, the clutch plates of a dry dual-clutch transmission are in direct contact with the engine's flywheel. The heat generated during operation is dissipated by air cooling, which makes the transmission prone to heating up during operation.
20
5
Share

How Many Chances Are There for New Vehicle Plate Selection on Traffic Management 12123?

There are 5 chances for new vehicle plate selection on Traffic Management 12123. There are two methods for new vehicle plate selection: 1. Internet random selection: Each time, 10 plate numbers are generated, and you can choose one to add to the candidate queue. There are a total of 5 chances (the number may vary by region, with a maximum of 5). After 5 chances, you can confirm your selection from the 5 candidate numbers. 2. Internet self-edited selection: You can directly edit a plate number and verify if it is available. If the number is available, the system will confirm it immediately, ending the selection process. If the number is not available, it means the verification has failed. There are a total of 20 chances for verification failure (the number may also vary by region, with 20 being the minimum). New plate number segments will be added to the self-edited selection pool at a random time 7 days after being added to the random selection pool, and the exact time is not disclosed.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.