What is the first maintenance mileage for the Lynk & Co 01?

2 Answers
SanAsher
08/27/25 6:09am
The first maintenance for this vehicle is due at one year or 10,000 kilometers, whichever comes first. Additional information: Change engine oil and oil filter (using the oil provided by the 4S store is sufficient); Clean the air filter and cabin air filter, check if brake fluid, antifreeze, and power steering fluid are lacking, and top up if necessary. Inspect the chassis components and suspension for any abnormal oil leaks or looseness (including tire pressure). Check if all lights are functioning properly. Inspect the wear condition of the brake pads. Measure the battery voltage to ensure it is normal. The above items are generally free of charge, and it is recommended to make an appointment in advance. All recommended items by the 4S store should be performed.
Was this review help?
8
1
Share
McJayla
09/09/25 5:02am
I haven't been driving my Lynk & Co 01 for long, and just had its first maintenance service, which is due at either 10,000 km or one year, whichever comes first. The car's design is quite smart, with maintenance reminders popping up. I personally went to the dealership for a check-up at 9,000 km. The technician said the key points of the first maintenance include changing the engine oil, filters, and so on, with many free services included. Why is the mileage so important? After the break-in period of a new car, mechanical components need to be properly adjusted to extend the engine's lifespan and ensure smoother driving. Delaying maintenance for too long can lead to minor issues, such as increased fuel consumption or strange noises. I recommend new car owners go early and not exceed the limit; you can also learn some maintenance tips and drive with more peace of mind. Missing the deadline might affect the warranty, which would be a big problem. Regular maintenance can save you money on repairs—totally worth it!
Was this review help?
12
0
Share
Expand All
More Forum Discussions

What is the fuel consumption of the RS7?

RS7 owner average fuel consumption: average fuel consumption of 17.8 liters per 100 kilometers, official fuel consumption: 10.3 liters. Here is additional information: Engine: The Audi RS7 is a mid-to-large-sized imported luxury car, originally equipped with a 4.0T V8 turbocharged engine, providing ample power. Design style: The Audi RS7 concept car was designed by a designer from Austria, and the car's exterior design incorporates the styles of several Audi models. The side body and rear design are very similar to the Audi R8, while the car doors adopt Lamborghini's classic scissor door design.
4
1
Share

How to Tighten Motorcycle Mirrors?

First, take a wrench and loosen the screws on the mirror to make them slack. Hold the mirror with your hand and rotate it counterclockwise until the mirror comes off. Place the removed mirror on the ground to inspect the extent of damage. Adjust the mirror angle and use the wrench to tighten the screws on the mirror.
8
2
Share

How to Reset the Maintenance Reminder for the 2020 Magotan?

First, turn the ignition key of the Volkswagen Magotan to the ON position to illuminate the car's dashboard. Then, press the down button on the steering wheel to locate and select the maintenance option. After entering the maintenance interface, a selection screen will appear; choose the reset option. Finally, the vehicle's maintenance reminder will be canceled.
14
1
Share

What is the correct method for B2 pressing the pancakes?

Use the raised left ridge inside the car hood to align with the direction of the front 1st and 2nd pancakes. When the car is about to pass the 4th pancake, center the steering wheel. Once the car is about to pass the 5th pancake, straighten the steering wheel.
8
1
Share

How to Adjust the Angle of the Wiper Linkage Rod?

First, turn the key to the ON position, activate the wipers, then turn off the switch and the key. At the base of the wiper arm, remove the dust cover, use an appropriate wrench or socket to loosen the screw until it can be rotated. Then lift the wiper blade and gently shake it. Once it becomes loose, position the wiper blade to the desired angle, tighten the screw, and replace the dust cover.
15
2
Share

Difference Between TPR Wheels and Rubber Wheels?

TPR tires are tire products that do not require high wear resistance or strength, whereas rubber tires used in vehicles demand high load-bearing capacity, wear resistance, and mechanical strength. Here is additional information: TPR tires: Primarily used for casters, cart wheels, and toy tires where load-bearing capacity and wear resistance strength requirements are not very high. They are typically made of pure TPR material or a composite of TPR with other materials like PP or ABS through injection molding. Rubber tires: Usually vulcanized rubber tires, used for various vehicle tires. Due to the high demands on load-bearing capacity, wear resistance, and mechanical strength, the material requirements for these tires are stringent. Besides vulcanization, materials like steel wires and nylon fabric are incorporated into rubber tire products to enhance impact resistance and anti-burst performance.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.