What is the first maintenance mileage for the Baojun 530?

3 Answers
MacRichard
07/29/25 7:50am
Baojun 530's first maintenance is at 50,000 kilometers. The first maintenance items include: 1. Replace engine oil, oil filter, clean air filter, check whether the generator belt and wiper blades are damaged, check whether the levels of various fluids are normal, and check whether the tire pressure is normal; 2. Check the car chassis: including whether the brake pads, brake discs, connecting rods, ball joints, and ball cages are scratched; 3. Check whether all switches and lights in the car are working properly. Below is information about the first maintenance of a new car: 1. Check the tire wear condition and whether pressure adjustment is necessary. 2. Check the entire lighting system: headlights, indicator lights, emergency signal lights, trunk light, passenger compartment light, glove box light, dashboard warning lights, etc. 3. Check the operation of the windshield wiper, the position of the wiper blade, and its wear condition. 4. Check the condition of the exterior of the car body, the protective parts and pipes under the car body (exhaust-fuel lines-brake lines), and rubber parts (dust covers, bushings, spacers). 5. Check the condition of various control belts. 6. Check and adjust the height and travel of the clutch pedal. The clutch is a component we use frequently, so its inspection is very necessary. 7. Check and adjust the handbrake travel. 8. Check and tighten the chassis screws, as the chassis is inevitably impacted during driving, which may loosen the screws. 9. Clean the air filter element. The air filter plays a protective role for the air. 10. Refill various fluids (engine coolant, brake fluid, windshield washer fluid, etc.). 11. Replace the engine oil. 12. Replace the engine oil filter.
Was this review help?
3
0
Share
JakeMarie
08/13/25 2:34am
I remember when I drove the Baojun 530, it was brand new, and the salesperson specifically reminded me that the first maintenance should be done around 5,000 kilometers and not to delay it. I took mine to the 4S shop at 4,900 kilometers, where the technician replaced the oil filter and checked the tire pressure and brake system. When a new car is just driven, the impurities in the engine need to be cleared early, otherwise fuel consumption will increase, and the power won't be as smooth. After the maintenance, I felt the throttle was more responsive, and the fuel consumption dropped a bit. I suggest everyone keep track of the odometer and not wait until it's overdue to go, as it might affect the warranty terms and make repairs more expensive. Safety comes first when driving, and timely maintenance can save a lot of trouble.
Was this review help?
10
3
Share
Expand All
VanNorah
10/05/25 2:41am
As a mechanic who frequently works on cars, I've noticed that the first maintenance mileage for models like the Baojun 530 is generally set at around 5,000 kilometers, as clearly stated in the manufacturer's manual. New cars are just breaking in, and the parts need time to adjust. The engine oil will carry metal shavings and other debris, making 5,000 kilometers the perfect time for a cleanup. During maintenance, it's also essential to inspect the transmission system and electrical components, such as checking if the battery and lights are functioning properly. Neglecting this maintenance period can lead to faster engine wear, resulting in costly repairs or even the risk of breaking down on the road. I recommend car owners set a reminder on their phones to schedule a visit to the shop on time—don't risk major losses for minor savings.
Was this review help?
12
5
Share
Expand All
More Forum Discussions

What to Do If the Car Suspension Is Too Hard?

The solutions for a car suspension that is too hard are: 1. Reduce tire pressure to improve ride comfort, but avoid lowering it too much as it can damage the tires and pose safety risks to passengers; 2. Adjust the stiffness of the shock absorbers; 3. Install adjustable shock absorbers; 4. Use seat cushions—excessive stiffness can make passengers feel bumpy and uncomfortable, so car seat cushions can help improve comfort; 5. Break in the shock absorbers; 6. Slow down when encountering bumps, potholes, or muddy roads. The working principle of shock absorbers: When relative motion occurs between the frame or body and the axle due to vibration, the piston inside the shock absorber moves up and down. The oil inside the shock absorber chamber repeatedly flows from one chamber to another through different orifices. The friction between the orifice walls and the oil, as well as the internal friction between oil molecules, creates a damping force that converts the car's vibration energy into heat energy, which is then absorbed and dissipated into the air by the shock absorber.
19
5
Share

How to correctly activate the Mintong Card ETC?

To activate the Mintong Card, you need to visit a nearby Mintong Card Service Center. Since the Mintong Card is designated for one vehicle only, there is a sensor on the back of the electronic tag. If you remove and reattach it yourself, it will become invalid, and you must go to a nearby Mintong Card Service Center to reactivate it for normal use. To activate the Mintong Card, you need to visit a nearby Mintong Card Service Center: because the Mintong Card is designated for one vehicle only, there is a sensor on the back of the electronic tag. If you remove and reattach it yourself, it will become invalid, and you must go to a nearby Mintong Card Service Center to reactivate it for normal use; the Mintong Card is the ETC card issued in Fujian Province, equivalent to a subcategory of ETC cards. However, remember to call the ETC service point in advance for consultation when reactivating the Fujian ETC. The consultation number is 059112122. The activation requirements vary by region, so don't waste a trip—it wouldn't be worth it.
3
0
Share

Why does the car smell bad?

In the case of a bad smell in the car, it is necessary to clean the evaporator and the air conditioning ducts. Almost all new cars contain several toxic substances such as formaldehyde, benzene, acetone, and xylene, which are the main toxic substances causing air pollution inside new cars. The leather seats, chemically treated decorative panels, and easily accessible engineering plastics, rubber, and synthetic fabrics in the car will emit unpleasant odors when the car is new or during extreme weather (after exposure to the sun), affecting people's health and safety. The sources of odors in the car usually come from three aspects. First, from the new car itself: cars are composed of many components, and if the harmful gases and odors in these components are not sufficiently released, they can pollute the cabin for a long time. Second, from the interior decorations: the harmful gases contained in the decorative materials, including benzene, formaldehyde, acetone, and xylene, can cause varying degrees of air pollution inside the car. Third, due to the use of air conditioning or poor cabin sealing, pollutants such as sulfur dioxide, carbon dioxide, and evaporated gasoline can enter the car and cause pollution.
12
3
Share

How to Deal with Steering Wheel Play?

Steering wheel play can be adjusted by performing a wheel alignment on the steering gear. Below are specific explanations regarding increased steering wheel play: 1. Cross joint wear: The steering column cross joint is essentially a universal joint, which functions to change the direction of the steering column torque and prevent the steering column from puncturing the driver in the event of a severe accident. Wear on the cross joint can lead to increased steering wheel play and produce a clicking sound. 2. Steering gear rack and pinion wear: Not returning the steering wheel to the center position when parking can subject the rack and pinion to greater pressure, accelerating wear. When the rack wear is not particularly severe, the tightening force of the rack and pinion can be increased using the adjustment screw on the steering gear, but this will correspondingly make the steering wheel heavier. 3. Tie rod end wear: The steering gear has inner and outer tie rod ends. The inner tie rod end connects the tie rod to the steering gear rack, while the outer tie rod end connects the steering knuckle to the tie rod. Lifting the car and manually shaking the wheel can allow you to feel the play in the tie rod ends and hear a rattling sound.
5
4
Share

How to Properly Turn Off the Car Radio?

How to turn off the car radio? On the navigation interface, simply press the MODE button and switch to AUX. If it's a button-operated system and you want to turn off the radio, the radio switch is usually located at the bottom left corner of the screen. Press it with your hand, and the car radio will turn off. The car radio is a voice entertainment configuration installed in vehicles and is one of the earliest and most common features of in-car audio and video entertainment systems. How to use the car radio: Start the vehicle or turn on the ignition switch. Insert the car key into the keyhole and turn it halfway; this will activate the ignition switch, illuminating the dashboard and ensuring all circuits are powered. Alternatively, you can directly start the vehicle. The car radio screen will turn on. Locate the radio's power switch and press it to activate the radio screen. For radio settings, click the "Settings" button on the right to access various options, including channel selection, saving favorite channels, or deleting unwanted channels.
18
4
Share

What are the three golden principles of safe driving?

Safe driving relies on three golden principles: stay focused, observe carefully, and prevent in advance. Five key reminders are: 1. Strictly adhere to traffic regulations and never drive under the influence of alcohol; 2. Adjust your speed according to road conditions, traffic flow, and weather conditions; 3. Remember to take a break every two hours during long-distance driving; 4. Stay focused while driving and avoid using mobile phones or eating; 5. Maintain a good mental state for driving. Additional information: Correct driving posture is crucial for safe driving. It not only reduces fatigue during long drives and ensures good visibility but also makes driving actions more precise and swift. Driving posture mainly relates to the steering wheel and seat. After sitting in the driver's seat, you should first sit deeply in the back of the seat, allowing your lower back and shoulders to rest against the backrest.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.