What is the first maintenance mileage for the 2021 Passat?

2 Answers
VonElaina
07/25/25 9:22pm
The first maintenance for the 2021 Passat is at 5,000 kilometers or three months after taking delivery of the vehicle. Below are the details: 1. Content: Inspect and tighten all mechanical connection nuts in the engine compartment and throughout the vehicle; check tire tread and pressure, perform four-wheel alignment; replace engine oil and oil filter; inspect and adjust all vehicle lights; use software to check the onboard electronic system; inspect and lubricate front and rear door hinges, check automatic opening and closing of doors and sunroof glass; check levels of engine coolant, windshield washer fluid, brake fluid, and battery fluid; finally, inspect the vehicle chassis; perform a driving check on the suspension and braking system. 2. Preparation: Have the user manual and vehicle registration ready. If any faults or questions arise during daily driving, note them down and inform the staff during the first maintenance registration for corresponding checks.
Was this review help?
2
0
Share
MacRachel
08/11/25 10:16pm
I've been driving my 2021 Passat for almost two years now. The manual clearly stated that the first service should be done at 7,500 km when I bought the car, mainly to change the engine oil and oil filter to remove impurities from the break-in period. I delayed it until 8,000 km before visiting the dealership, where the technician warned that delayed maintenance could lead to engine wear or affect warranty coverage. They also checked the tires, brakes, and chassis condition—quite thorough. Now with nearly 30,000 km on the odometer, I've realized that regular maintenance really keeps the engine running smoother and fuel consumption more stable. Considering your daily driving habits, like frequent city traffic, you might want to service it a bit earlier. After all, the Passat isn't cheap—proper maintenance saves headaches, extends its lifespan, and avoids costly repairs down the road.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

What is the method for removing the taillights of a Cadillac CT5?

The method for removing the taillights of a Cadillac CT5 is as follows: 1. Use a screwdriver to release the fixed clips; 2. Remove the inner lining cotton; 3. Locate the three nuts securing the rear taillight and remove them; 4. Disconnect the wiring harness plug of the rear taillight to complete the removal. The Cadillac CT5 has a body length, width, and height of 4924mm, 1883mm, and 1453mm respectively, with a wheelbase of 2947mm, a fuel tank capacity of 66 liters, and a trunk capacity of 384 liters. The Cadillac CT5 is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 237PS, a maximum power of 174kW, a maximum torque of 350Nm, and is paired with a 10-speed automatic transmission.
20
3
Share

What kind of engine oil is used for Changan CS55?

Changan CS55 uses 5W40 full synthetic engine oil or 0W40 full synthetic engine oil. The steps for changing the engine oil are: 1. Lift the car, remove the protective plate, and place a container of about 10L under the oil drain screw; 2. Unscrew the oil drain screw, use an air gun to blow for two minutes at the oil filler port, tighten the oil drain screw after draining, and wipe it with a tissue to check for oil leakage; 3. Install the protective plate and lower the car, then use a funnel to add engine oil into the oil filler port. The length, width, and height of the Changan CS55 are 4500mm, 1855mm, and 1690mm respectively, with a wheelbase of 2650mm and a fuel tank capacity of 58L.
16
2
Share

What are the solutions for beginners stalling the car?

Solutions for beginners stalling the car are: 1. When starting, control the clutch properly and only release it after the vehicle begins to move; 2. While controlling the clutch, apply the throttle gently when releasing the clutch; 3. Use the handbrake to prevent rolling back and stalling; 4. Find the right time to shift gears to avoid driving at high gears with low speed. The reasons for beginners stalling are: 1. Nervousness and tension; 2. Insufficient mastery of the clutch; 3. Incoherent control of the clutch and throttle; 4. Lack of understanding of gear positions, leading to wrong gear selection; 5. Only stepping on the brake without the clutch during emergency braking.
20
5
Share

What car has a star-like logo?

The car with a star-like logo is the Dongfeng Venucia. Venucia models include: Venucia Star, Venucia T60, Venucia T70, Venucia T90, Venucia E30, etc. Taking the 2020 Venucia T70 Deluxe Edition as an example, its body dimensions are: length 4614mm, width 1786mm, height 1653mm, with a wheelbase of 2630mm, a fuel tank capacity of 65 liters, and a trunk capacity of 534 liters. The 2020 Venucia T70 Deluxe Edition is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, a maximum torque of 198Nm, and is paired with a continuously variable transmission.
17
2
Share

What are the reasons for the failure of tire pressure monitoring sensors?

The reasons for the failure of tire pressure monitoring sensors are: 1. Malfunction of the tire monitoring system; 2. Short circuit of the tire pressure sensor. The solutions for the failure of tire pressure monitoring sensors are: 1. Inspect and repair the tire pressure monitoring system; 2. Replace the tire or tire pressure sensor. The functions of tire pressure monitoring sensors are: 1. Prevent accidents; 2. Extend the service life of tires; 3. Reduce wear and tear on vehicle components. The working principle of tire pressure monitoring sensors is that the sensors installed on the tires monitor the pressure and temperature of the tires in real time, transmit the data wirelessly to the receiver, display the data changes on the display to alert the driver, and issue an alarm when there is a tire leak or the pressure changes exceed the safety limit.
7
1
Share

How to Charge an Electric Vehicle at Home?

Electric vehicles can be charged at home using the following method: 1. Connect the battery's positive terminal to the power source's positive terminal and the negative terminal to the power source's negative terminal; 2. Charge until the electrolyte releases bubbles and the single-cell voltage rises to 2.3 to 2.4 volts, then stop; 3. Reduce the charging current to half; 4. Measure the single-cell battery voltage until it reaches 2.7 volts. Maintenance methods for electric vehicles: 1. Avoid parking the electric vehicle in an open parking lot for extended periods; 2. In winter, avoid repeatedly starting the car without intervals; 3. Frequently charge the electric vehicle's battery; 4. Regularly clean the battery terminals and apply grease to protect the wiring harness.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.