What is the first maintenance mileage for the 14th-generation Sylphy?

Can a B2 license drive a tractor head?

No, a B2 license cannot drive a tractor head. Here are the specific reasons: 1. A tractor head is classified as a semi-trailer tractor head, which requires an A2 driver's license to operate. 2. The vehicles that a B2 license can drive include heavy-duty, medium-duty trucks or large, heavy, and medium-duty special operation vehicles, as well as heavy-duty and medium-duty trucks. Here is some relevant information about semi-trailer tractors: 1. A semi-trailer has two vehicle licenses: one for the tractor (main vehicle) and one for the trailer. The tractor, or the tractor head, is labeled as a 'semi-trailer tractor' on its vehicle license. 2. It can operate independently on the road. The types of vehicles that can be driven with each license level are detailed on the back of the driver's license. Driving a vehicle that does not match the permitted vehicle type can result in a 12-point penalty and a fine if caught by traffic police.

5

Share

What does the wrench light on the car indicate?

Car dashboard wrench indicator light means: maintenance reminder, the car has reached the service interval. Introduction about car maintenance: 1. The small wrench warning is a maintenance reminder function set by the manufacturer to alert the owner to perform scheduled mileage-based maintenance. When reaching the preset maintenance date, the indicator light will appear to notify the driver. After maintenance is completed, the maintenance reminder light needs to be reset according to the procedure before it can be turned off. 2. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting or replacing certain parts of the car, also known as car servicing.

1

4

Share

Is Engine Shaking Normal During the Break-in Period of a New Car?

Engine shaking during the break-in period of a new car is normal. Here are the specific reasons for engine shaking during this period: 1. The engine may experience slight shaking when starting. If you purchase a 3-cylinder engine, shaking may occur during operation due to mechanical movement. The more cylinders an engine has, the smoother it will run, but this also comes with higher fuel consumption and engine costs. 2. Shaking during idling depends on the severity of the shaking. You can determine whether the engine shaking is normal by observing the intermittency of the idling shake. If the idling is steady and regular, it is normal. However, if the idle speed is unstable and the RPM needle fluctuates up and down, it indicates abnormal car shaking. 3. During a cold start, engine shaking decreases as the water temperature rises. If the shaking persists after the water temperature normalizes, it may be due to other reasons, and a timely inspection is necessary.

3

5

Share

What Causes Abnormal Noise During Cold Start?

There are several main reasons for abnormal noise during cold start: 1. Lack of lubrication in the starter internal gears: This causes the starter to become stiff or stuck, preventing the gears from retracting promptly. 2. Excessive dirt inside the starter or ineffective lubricant: When the flywheel forcibly drives the starter to rotate, the speed difference between them creates abnormal noise. 3. This noise typically disappears after the starter warms up with the engine, but severe cases may produce noise with every start. To eliminate this noise, the starter requires cleaning, maintenance, or replacement.

1

5

Share

What is the function of an eccentric shaft sensor?

The specific functions of an automotive eccentric shaft sensor are as follows: 1. The engine eccentric shaft sensor detects the position of the eccentric shaft when equipped with an electronic valve control system. The eccentric shaft adjusts the camshaft to achieve the optimal intake valve lift under various operating conditions. The eccentric shaft is adjusted by the electronic valve control servo motor. 2. The eccentric shaft sensor is equipped with two independent angle sensors with opposite characteristic curves. The eccentric shaft sensor operates based on the magnetoresistive effect principle, where a ferromagnetic conductor changes its resistance under the influence of a magnetic field. This sensor features a redundant design structure, with two sensor elements housed in a single unit. One sensor serves as the primary unit, while the other acts as a reference sensor for monitoring purposes.

5

4

Share

How many kilometers can you drive with one bar of fuel left in the car?

When there is one bar of fuel left in the car, it can generally travel an additional 40-50 kilometers, but the range may vary depending on the vehicle model. It is recommended to carefully check the owner's manual. Below are some precautions regarding the fuel gauge: 1. Do not wait until the warning light comes on to refuel: Since the fuel pump is located inside the fuel tank and relies on gasoline for cooling and lubrication, insufficient fuel can impair the pump's normal operation and reduce its lifespan. 2. It is not advisable to fill the tank completely: Gasoline expands when heated and evaporates into gasoline vapor under high summer temperatures, requiring space to accommodate this. If the tank is overfilled without any space left, gasoline vapor or even liquid gasoline may enter the carbon canister for storage. Once the carbon canister is full, the excess will escape into the air, resulting in both waste and environmental pollution.

9

0

Share

What is the first maintenance mileage for the 14th-generation Sylphy?

Can a B2 license drive a tractor head?

What does the wrench light on the car indicate?

Is Engine Shaking Normal During the Break-in Period of a New Car?

What Causes Abnormal Noise During Cold Start?

What is the function of an eccentric shaft sensor?

How many kilometers can you drive with one bar of fuel left in the car?

How to Use an Adjustable Wrench?

What is a Parallel Import Car?

Does prolonged idling affect a sedan?

How to Change Transmission Fluid with a Flush Machine?