What is the first maintenance mileage for Brilliance BMW?

3 Answers
DylanLee
07/29/25 8:35pm
The first maintenance should be performed at 10,000 kilometers or 6 months. All vehicle models are equipped with an automatic maintenance reminder system, which determines the maintenance schedule based on the owner's driving habits and road conditions. The specific items for BMW's first maintenance include: changing the engine oil, replacing the oil filter, cleaning the air filter, inspecting the generator belt and wiper blades for damage, checking the levels of various fluids, verifying proper tire pressure, and examining tires for uneven wear, bulges, or damage. Below is an introduction to car maintenance: 1. Introduction to car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle upkeep. 2. Scope of car maintenance: Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. Purpose of car maintenance: The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
Was this review help?
6
3
Share
AliviaLee
08/14/25 5:40pm
When I bought a Brilliance BMW, the salesperson specifically emphasized that the first maintenance should be done at around 12,000 kilometers, roughly after driving for a year. I remember I made an appointment with the 4S dealership as soon as I hit a little over 11,000 kilometers. The whole process was quite simple—they replaced the oil filter and checked the brakes and tire wear. Newbies are advised not to delay it for too long, as this can prevent minor issues from turning into major problems, such as increased engine noise or higher fuel consumption. Continuing maintenance every 12,000 kilometers afterward can save a lot of hassle. Don’t just focus on the mileage; if it exceeds a year, you should still go. Develop a habit of regular record-keeping—I set reminders on my phone to avoid forgetting and causing subsequent issues.
Was this review help?
18
4
Share
Expand All
HaileyMarie
10/16/25 5:22am
As a seasoned driver with years of experience, I find Huachen BMW's fixed first maintenance at 12,000 kilometers to be reliable. Compared to older cars that required maintenance every 5,000 kilometers, technological advancements have truly made things more convenient. After the break-in period for a new car, this milestone is the right time for a comprehensive inspection. I always remind friends and family to do it on time to avoid issues like aging wiring or a dead battery. During maintenance, it's also wise to check the air conditioning and lighting systems, which can enhance driving safety. An additional tip is to replace the cabin air filter every two years—it's cost-effective and efficient, so don't wait until problems arise to fix them.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

Which model is the Camry V6 engine?

A25A/A25C is the engine model used in the Camry V6, with a maximum horsepower of 209 hp, a maximum power output of 154 KW, a maximum power speed of 6600 rpm, and a peak torque of 250 N.m. The Camry's engine is domestically produced, manufactured by GAC Toyota Engine Co., Ltd. For the daily maintenance of the Camry V6 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to the mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil, but in large amounts, it precipitates out, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
7
5
Share

How many kilometers should a major maintenance be performed?

Generally, a major maintenance is performed every 40,000 kilometers. However, this interval is not absolutely fixed, as some vehicle models may require it every 60,000 kilometers. The specific schedule should follow the maintenance manual (vehicle user manual) which provides detailed instructions. Additional information: 1. Major maintenance replacement items: Major maintenance builds upon minor maintenance. Routine minor maintenance only requires oil and oil filter replacement, while major maintenance involves more items. In addition to oil and oil filter, major maintenance typically includes the following: (1) Replace air filter, cabin air filter, and fuel filter. (2) Replace transmission fluid. (3) Replace brake fluid. (4) Replace coolant. (5) Replace spark plugs. 2. Major maintenance inspection items: Additionally, tires and brake pads require special attention. If severe wear is detected, immediate replacement is necessary. The replacement intervals for these components vary significantly due to various objective factors, but generally fall within the range of 40,000 to 60,000 kilometers. Another critical component is the timing belt, which is often overlooked. Check for signs of aging in the timing belt, and replace it promptly if any abnormalities are found.
5
3
Share

Does the OEM bumper come painted?

OEM bumpers come painted. Below is some information about OEM bumpers: 1. Currently in the market, there are two types of bumpers: OEM and original vehicle. OEM bumpers are supplied directly by the manufacturer, while original vehicle bumpers are produced and supplied by aftermarket manufacturers, and some are even made by small workshops. 2. If it is an OEM bumper, the manufacturer has already painted it before leaving the factory. The advantage of OEM bumpers lies in their toughness, as they are unlikely to deform even under high pressure. 3. If the source is from aftermarket manufacturers or small workshops, the paint on the bumper is usually applied later (only containing primer).
19
1
Share

What is the difference between China V and China VI when buying a car?

China V and China VI mainly have the following differences: 1. Different test cycles: China VI conducts a comprehensive assessment of vehicle emissions during cold starts, acceleration and deceleration, and high-speed high-load conditions, covering a wider range of engine operation and imposing higher requirements on vehicle emission control performance. 2. Different test procedure requirements: The mass requirements of test vehicles and road load settings directly affect the fuel consumption and emission performance of vehicles. The China VI standard adopts stricter test requirements, such as increasing the weight of test vehicles and requiring tire specifications to be consistent with mass-produced vehicles.
4
4
Share

Which car currently uses a rotary engine?

Currently, only Mazda persists in developing twin-rotor engines. However, due to technical challenges and inherent drawbacks of rotary engines, Mazda has only equipped its mass-produced RX-8 with this powertrain. Here are some key points about rotary engines: 1. Rotary engines differ significantly from conventional engines in terms of production, assembly, and maintenance, resulting in high development costs. 2. With substantial improvements in power-to-weight ratio, emissions, and fuel efficiency of reciprocating piston engines, coupled with the automotive industry's mature expertise in piston engine technology versus limited knowledge of rotary engines, rotary engines haven't demonstrated clear advantages. Consequently, most automakers lack motivation to develop them, leaving Mazda as the sole exception.
17
0
Share

What brand is Firelli tires?

Firelli is Pirelli. Pirelli tires are products of the Italian company Pirelli. Pirelli is one of the world's most renowned tire companies, founded in Italy in 1872, and is currently the fifth-largest tire manufacturer globally, with 24 factories worldwide. Tire maintenance precautions: 1. Tire pressure check: Check the tire pressure when the tires are cold, i.e., after the vehicle has been parked for three hours or driven less than 2 kilometers. Check at least once a month, including the spare tire, with the pressure value based on the parameters recommended by the vehicle manufacturer. If any abnormalities are found, thoroughly investigate the cause. Tire pressure is a crucial indicator of tire lifespan; exceeding the normal pressure by 20% reduces tire life by 10%, while being 30% below normal pressure reduces tire life by 52%. 2. Avoid foreign objects: While driving, especially at high speeds, even a small pebble can cause significant damage to the tires. Pay special attention during driving. Unexpected cuts, incorrect tread patterns, and contamination by gasoline or diesel can all degrade tire performance. 3. Wear level: Stop using the tire when it wears down to the wear indicator, which is generally at a remaining tread depth of 1.6 mm. 4. Wheel alignment, balancing, and tire rotation: Due to factors like different driving positions, front and rear tires wear unevenly. Rotating tires can achieve optimal wear and extend their lifespan. Generally, tires should be rotated every 8,000-10,000 kilometers, but if uneven wear is noticed, rotation should be done as soon as possible. 5. Prevent tire aging and damage: Since tires are rubber products, avoid contact with oil, acid, hydrocarbons, and other chemicals during driving, parking, or storage, as they can cause corrosion, deformation, or softening. When parking, it's advisable to park in the shade to prevent direct sunlight from causing premature aging and damage. Regular maintenance can include using tire wax for care.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.