What is the first maintenance interval for the Volkswagen Lamando?

1 Answers
LaJake
07/29/25 11:25pm
The first maintenance interval for the Volkswagen Lamando is after driving 5,000 kilometers or 6 months, followed by regular maintenance every 10,000 kilometers. The first maintenance includes changing the engine oil, engine oil filter, air filter, inspecting the engine belt, wipers, checking various fluid levels for normalcy, and verifying tire pressure. The Volkswagen Lamando is a compact coupe under the Volkswagen brand, with dimensions of 4615 mm in length, 1826 mm in width, and 1425 mm in height, and a wheelbase of 2656 mm. The Volkswagen Lamando is equipped with two engines: a low-power 1.4-liter turbocharged engine and a high-power 1.4-liter turbocharged engine.
Was this review help?
10
2
Share
More Forum Discussions

What does a horizontally opposed engine mean?

Horizontal opposed engine means that the engine pistons are evenly distributed on both sides of the crankshaft, moving left and right in the horizontal direction, which reduces the overall height of the engine, shortens the length, lowers the center of gravity of the vehicle, and makes the vehicle run more smoothly. The following is a related introduction about cars: 1. Definition of car: The latest national standard of China "Terms and Definitions of Types of Cars and Trailers" (GB/T3730.1-2001) defines cars as follows: Vehicles driven by power, with 4 or more wheels, not running on tracks, mainly used for carrying people and/or goods; towing vehicles carrying people and/or goods; special purposes. 2. Introduction of domestic car brands: Domestic car brands include Hongqi, Changan, Great Wall, Chery, Geely, Roewe, BYD, etc.
11
1
Share

Will the insurance company cover a car flooded by rainwater?

If you have purchased auto damage insurance, the insurance company will compensate. Below is the relevant information: Relevant information: According to the relevant provisions of the insurance clauses, vehicle losses caused by general "natural disasters" such as rainstorms, floods, landslides, and mudslides fall under the coverage of auto damage insurance in commercial auto insurance, and the insurance company will settle the claim. Therefore, the insurance company will be responsible for compensating the direct losses caused by the vehicle being flooded, as stipulated in the insurance contract. Precautions: If the engine stalls during driving through water and is damaged due to forcibly restarting it, the insurance company may refuse to compensate. Therefore, if the vehicle stalls while driving through water, never attempt to restart it. Additionally, if you knowingly drive through severe water and cause engine damage, the insurance company will not cover the loss.
1
0
Share

What are the functions of the Buick GL8 center console buttons?

The center console buttons mainly include the audio control system and the air conditioning control system. Here is a relevant introduction about the center console buttons: 1. Electronic Stability Program (ESP): Effectively prevents loss of control situations such as body sideslip and tailspin. It is generally not recommended for drivers to manually turn it off. 2. Parking Radar/Image: This button activates the panoramic image and radar function, providing the owner with alarms and visual feedback to detect surrounding obstacles. 3. Auto Hold: There is no need to keep the foot on the brake pedal continuously; the system automatically locks the wheels. When the accelerator pedal is pressed, the wheels are unlocked, and the vehicle continues to move forward.
5
0
Share

Can the old vehicle inspection sticker be removed?

Previous vehicle inspection stickers can be removed, provided that the new inspection sticker has already been obtained. The vehicle inspection sticker is an annual label issued after passing the safety technical inspection for motor vehicles in operation. For new vehicles, the inspection sticker can be printed at the vehicle management office during license plate registration. For private cars older than six years, the inspection sticker must be obtained annually after passing the inspection at the vehicle inspection center. Here are methods to avoid leaving adhesive residue when removing old inspection stickers: 1. Place a towel on the dashboard, then spray adhesive remover directly on the inspection sticker. The entire sticker must be soaked with the remover. Let it sit for two minutes before peeling off the sticker by hand, then wipe away any remaining adhesive with the towel. 2. Use a hair dryer to evenly heat the entire inspection sticker. Then slowly peel it off by hand while continuing to apply heat during the removal process.
18
1
Share

Why does the car fail to start due to steering system malfunction?

Steering system malfunction causing the car to fail to start may be due to a dead battery. Below is relevant information about automotive fault codes: 1. Meaning: Automotive fault codes are error codes generated by the vehicle's ECU (Engine Control Unit) after analyzing malfunctions. Common fault codes are usually caused by sensor failures or poor sensor performance. However, some mechanical faults cannot be detected by the ECU. The vehicle dashboard may display some basic fault indications, but these only represent a small portion. The main diagnostics still require specialized equipment—a code reader—to retrieve fault codes. There are various types of code readers, such as X-431 and KT300, but their working principles and the fault codes they read are essentially the same. 2. Classification: Fault codes are divided into current codes, history codes, and intermittent codes. Current codes are easy to detect, history codes refer to previously unresolved fault codes, while intermittent codes are not fixed.
15
5
Share

Why does the speed detection light flash twice when not speeding?

That is a camera installed by the traffic police department, which takes a photo of the driver of every vehicle. Below is relevant information: There are three methods of speed detection on China's highways: Fixed camera speed detection: This means that only vehicles passing through areas with installed cameras are monitored for speed. If speeding is detected, the vehicle will be photographed and recorded. Section speed detection: This involves setting up a row of cameras at both ends of a highway section to photograph all passing vehicles. The average speed of each vehicle over the section is calculated based on license plate recognition. If the speed exceeds the limit, it will be recorded. Mobile speed detection: This refers to traffic officers using mobile speed detection devices (typically vehicles equipped with such devices or handheld speed guns) to randomly test vehicles on both sides of the road.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.