What is the first inspection mileage for the Avalon?

2 Answers
JaylaFitz
07/24/25 1:36am
The first inspection for the Avalon is at 5,000 kilometers. During this inspection, only the wear-prone components such as engine oil, oil filter, tires, and lights need to be checked. It's important to note that the first inspection is different from the first maintenance. The first maintenance is performed at 10,000 kilometers or six months of driving. Below is an introduction to the content and precautions for the first maintenance: Content of the first maintenance: Tighten the engine compartment and inspect and tighten all mechanical connection points and nuts; check tire tread and pressure, and remove small stones or debris stuck in the tires; replace engine oil and oil filter; use software to inspect the vehicle's electronic systems, check and adjust all lights, and inspect the suspension and braking systems; add lubricants, check the hinges of front and rear doors, automatic opening and closing of doors and sunroof glass, and inspect the chassis condition. Precautions for the first maintenance: Before the first maintenance, record any issues the vehicle may have and inform the service staff at the 4S shop. Before maintenance, review the user manual to understand the general scope of the maintenance. Many 4S shops offer free services for the first maintenance of new cars. Secure or remove valuable items from the car, such as mobile phones or cash, and store them at home or carry them with you.
Was this review help?
13
1
Share
LaKendra
08/10/25 9:15pm
As a reliable family sedan, I often pay attention to the maintenance schedule of the Avalon. According to Toyota's standards, the first inspection is usually conducted around 5,000 kilometers, which is equivalent to a few months of driving for a new car. It mainly involves a free oil change and inspection of key components, including tire wear, brake system, and fluid levels. If you don't go on time, you might miss warranty conditions or cause premature engine wear. I recommend fellow car owners to note down the mileage and not delay until 6,000 kilometers to take action. Regular maintenance can save you both trouble and money. Having used the car for several years myself, I found that timely first inspection helps maintain better performance and stable fuel consumption. It's worth developing this habit—safety first.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

How to heat the rearview mirror of Dongfeng Fengguang S560?

Dongfeng Fengguang S560's rearview mirror heating function shares the same button with the rear window defogging function, which is a rectangular button with three wavy arrows. Below is an introduction to the Dongfeng Fengguang S560: 1. The Dongfeng Fengguang S560 offers two seating layouts: five-seater and seven-seater (2+3+2). It comes in five body colors: Elegant White, Graceful Red, Charming Blue, Glacier Silver, and Ink Blue. In terms of configuration, it features full leather seats, a full-size spare tire, and the CVT Elite model can be optionally equipped with an electric panoramic sunroof. 2. In terms of power, the new Fengguang S560 is equipped with a 1.5T engine, delivering a maximum power of 110kW (150PS) and a peak torque of 230N·m. It is paired with either a 6-speed manual transmission or a CVT transmission, with combined fuel consumption of 7.4L and 7.2L per 100 kilometers, respectively.
20
4
Share

Where is the drainage hole of the Peugeot 408 door?

The location of the drainage holes on the Peugeot 408 doors: They are usually near the row of welds at the very bottom of the door, typically rectangular in shape, and can be found on both the front and rear doors. Common locations for drainage holes in vehicles: at the front windshield in the engine compartment, in the four corners inside the sunroof, at the lower part of the front and rear doors, inside the fuel filler cap, at the bottom of the spare tire in the trunk, and in the gaps between the front and rear headlights and the body fenders. Additional information: 1. Causes of clogged car drainage holes: The accumulation of debris such as leaves falling from trees is the main cause of clogged drainage holes in vehicles. Decaying leaves often attract insects, and if not cleaned for a long time, the decaying leaves and insect remains can enter the engine compartment, causing the drainage holes to clog. 2. Hazards of clogged drainage holes: Once the drainage holes are clogged, the speed at which water inside the car drains will slow down, eventually leading to a large amount of water accumulating inside the vehicle. Some of this water may flow into the car through the drainage pipes, damaging the interior and instruments. 3. Methods for cleaning car drainage holes: When there is poor drainage, it is necessary to determine which drainage hole or pipe is causing the issue based on the location of the accumulated water.
6
2
Share

Where is the OBD port located on the Dongfeng Fengguang 330?

The OBD interface of the Dongfeng Fengguang 330 is located inside the glove compartment on the passenger side. More relevant information is as follows: 1. OBD refers to the On-Board Diagnostics system. When a car malfunctions, the warning light on the dashboard will illuminate, and the On-Board Diagnostics system will generate corresponding fault codes, which are uploaded to the vehicle's computer. This helps mechanics quickly identify the problem. 2. The dimensions of the Dongfeng Fengguang 330 are 4365mm in length, 1720mm in width, and 1790mm in height, with a wheelbase of 2725mm, front track of 1425mm, and rear track of 1445mm.
2
5
Share

What is the range of Tesla Model X?

Tesla Model X has a maximum range of 580 kilometers. Here is more information about Tesla Model X: 1. The Model X is an SUV model, but its center of gravity is lower than that of a typical SUV, making it a crossover between an SUV and a coupe. 2. In terms of appearance, the rear is equipped with falcon-wing doors that open by folding upwards, which does not take up much space and allows passengers to get in and out easily in tight parking spaces. 3. The Model X is equipped with a medical-grade HEPA filter that can effectively filter pollutants or allergens in the air, such as pollen, bacteria, and PM2.5. Additionally, the vehicle's air conditioning system includes a bioweapon defense mode, which increases the air pressure inside the cabin to prevent outside contaminated air from entering.
2
5
Share

Can a bicycle pump be used to inflate a car tire with low pressure?

Car tires can be inflated using a bicycle pump because the tires used in household cars are low-pressure, with tire pressure around 2.3-2.5 bar. If the car is driven for long periods, it is advisable to keep a bicycle pump in the vehicle to prevent delays due to insufficient tire pressure. Below is relevant information about tires: 1. The internal pressure of a tire is significantly affected by temperature changes due to environmental conditions, typically varying by 0.1-0.3 bar. During driving, tire temperature increases further, and it decreases when the engine is turned off. Additionally, when temperatures drop sharply, tire pressure may decrease further. Temperature fluctuations affect pressure, and pressure changes impact the clamping force of the bead wires, which can also lead to minor leaks. 2. During aggressive driving or on rough road conditions, severe tire bouncing can affect the clamping force between the bead wires and the rim, potentially causing momentary gas leakage from the bead gaps. 3. The tire inflation valve has a self-locking mechanism based on internal pressure. However, if debris enters the valve, it may cause poor resealing and minor leaks.
9
0
Share

What is the difference between the GLC200 and GLC260?

Here are the relevant introductions of the GLC200 and GLC260: 1. The GLC200 is the standard configuration, while the GLC260 is the mid-range configuration. The main difference between the GLC200 and GLC260 lies in the tuning of the engine parameters. The GLC200 has a maximum power of 135kW, maximum horsepower of 184Ps, and maximum torque of 300N·m; the GLC260 has a maximum output power of 155kW, maximum horsepower of 211Ps, and maximum torque of 350N·m. 2. The design of the Mercedes-Benz GLC200 is relatively ordinary, while the Mercedes-Benz GLC260 is a sporty model with a more athletic exterior design. 3. The GLC200 lacks the following configurations compared to the GLC260: rearview camera; front seat heating; aviation headrests; lane change assist; lane departure warning; 360-degree panoramic camera; automatic folding mirrors; and electric memory. 4. The GLC200 features a more dynamic and rounded exterior line design, with details that exude luxury. The front face adopts a double-slat grille. Both models use the latest headlights, with an LED Intelligent Light System that automatically adjusts based on lighting and driving conditions, providing excellent visibility on rural roads, highways, and during turns. LED technology not only enhances the attractiveness of the headlights but also offers stronger brightness and lower energy consumption. Clear road conditions are visible at a glance.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.