What is the first car maintenance for?

How deep a cut on the new tire tread requires replacement?

If the tread is damaged, holes penetrating the crown with a diameter not exceeding 6mm can be normally repaired and used. Below is relevant information: 1. The service life of car tires is four years or 80,000 kilometers, whichever comes first. If there are more than 5 damages, early replacement is required. If there is damage on the sidewall, even just one instance requires replacement. If you frequently drive on poor road conditions causing severe tire wear, early replacement is necessary. 2. This means that if no issues occur with the tire (such as excessive patches, sidewall punctures, etc.), replacement is required when the tire has been in service for four years even if the mileage hasn't reached 80,000km. Similarly, if the mileage reaches 80,000km before four years, replacement is also recommended.

2

3

Share

Is the Audi Q2L a Three-Cylinder or Four-Cylinder?

Audi Q2L is a four-cylinder vehicle. Relevant information is as follows: 1. The Audi Q2L is a compact SUV under the Audi brand, with a body length, width, and height of 4236 mm, 1785 mm, and 1548 mm respectively, and a wheelbase of 2628 mm. 2. The 1.4-liter turbocharged engine of the Audi Q2L has the model code djs. This engine has a maximum power of 110 kW, with the power peak occurring between 5000 to 6000 rpm, and a maximum torque of 250 Nm, with the torque peak occurring between 1750 to 3000 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission.

16

0

Share

How to Replace Spark Plugs for Teana 2.0?

Teana 2.0 spark plug replacement method: Open the engine plastic cover, locate the engine high-voltage distributor wires, remove the high-voltage wires in sequence, use a spark plug socket to remove the spark plugs (be careful to prevent dust and debris from falling in), install the new spark plugs into the spark plug holes and tighten them with the socket, then reattach the high-voltage wires to the spark plug holes. It is recommended that owners replace spark plugs every 40,000 kilometers. The Teana has a length of 4901mm, width of 1850mm, height of 1450mm, wheelbase of 2825mm, front/rear track of 1620mm, and features a 4-door 5-seater sedan body structure that meets China VI emission standards.

19

1

Share

What are the four major systems of an automobile chassis?

An automobile chassis consists of four major systems: the transmission system, the running system, the steering system, and the braking system. The following introduces the functions of each component of the automobile chassis: 1. Transmission system: The function of the transmission system is to transmit the power from the engine to the driving wheels. 2. Running system: The function of the running system is to support and install various parts and assemblies of the automobile, transmit and bear various loads above and below the vehicle to ensure normal driving. 3. Steering system: The function of the steering system is to ensure that the automobile can travel in the direction selected by the driver. 4. Braking system: The function of the braking system is to decelerate and stop the automobile and ensure reliable parking.

9

0

Share

Is the AC button on or off when lit?

AC light on indicates the system is active. Here is relevant information: 1. The AC button controls the air conditioning compressor. During summer usage, the AC button must be activated (with light illuminated) to enable cooling; The cooling function operates by compressing refrigerant into liquid then vaporizing it to absorb heat from the air; When active, the compressor pulley engages, increasing engine load and fuel consumption. 2. AC stands for Air-conditioning - the climate control system that regulates cabin temperature, humidity, air purity and circulation to optimal levels, ensuring passenger comfort and reduced travel fatigue while providing drivers with better working conditions. This ventilation system plays a vital role in safe driving.

13

4

Share

Do You Need to Press the Brake When Engaging the Clutch?

When driving a manual transmission, it's not always necessary to press the clutch while braking. The key factors to consider are vehicle speed, gear position, and engine RPM. Here's some relevant information: 1. The engine's power is transmitted to the gearbox through the clutch, and the gearbox alters the engine's RPM (through gear shifting) before transmitting it to the wheels. The engine and wheels always rotate synchronously at a certain ratio. 2. Therefore, the theoretical minimum speed for each gear is the vehicle speed at engine idle. When the vehicle speed in a particular gear falls below this threshold, the engine is prone to stalling. During deceleration, as long as the current speed is above the idle speed for that gear, there's no need to press the clutch. When braking in the current gear, you don't need to press the clutch as long as the engine RPM doesn't drop below idle speed.

6

2

Share

What is the first car maintenance for?

How deep a cut on the new tire tread requires replacement?

Is the Audi Q2L a Three-Cylinder or Four-Cylinder?

How to Replace Spark Plugs for Teana 2.0?

What are the four major systems of an automobile chassis?

Is the AC button on or off when lit?

Do You Need to Press the Brake When Engaging the Clutch?

What are the consequences of suddenly shifting to P gear while driving?

Why does a new car shake severely during cold start?

How to Fix P1604 Trouble Code?

What is the difference between horsepower and power?