What is the firing order of a 6-cylinder diesel engine?

What to Bring for the First Maintenance of Changan CS55?

Items required for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle's driving license; vehicle registration book, vehicle purchase invoice, to perform the first maintenance at the designated maintenance facility. Note: Make an appointment with the 4S store in advance. The first maintenance refers to the initial service after the new car has been driven, with specific timing varying by vehicle, generally after driving 1,000 to 3,000 kilometers or three months. It's essential to attend the first maintenance promptly, neither in advance nor delayed. The completion of the first maintenance marks the end of the car's break-in period, allowing it to be driven under standard load and normal speed as required by the vehicle. The timing for the first insurance is calculated from the date of vehicle pickup. There are two indicator values for the first maintenance: mileage and time. Whichever comes first serves as the standard. First maintenance items include: changing engine oil and oil filter, cleaning the air filter, checking various oil levels for normalcy, inspecting the generator belt and wiper blades for damage, checking tire pressure for normalcy, and inspecting tires for damage or bulging, etc. Time required: Completing all tasks takes approximately 2 hours. The most crucial aspect of the first maintenance for a new car is changing the engine oil and oil filter. When changing the engine oil, the oil filter must also be replaced simultaneously. The choice of engine oil must refer to the "Vehicle Use and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not rinse the interior of the car body with water: Many people clean their cars during holidays, washing the body with water and wiping with a cloth. Here, it's important to note that the interior of the car body should not be directly washed with water. If the floor mats are dirty, a vacuum cleaner can be used, or they can be taken out, brushed with detergent, dried, and then placed back. There are many holes under the rubber mats on the cabin floor. If water enters, it won't dry naturally but will flow through these holes to areas like the gearbox, causing erosion and corrosion. A better approach is to clean with a vacuum and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is insufficient, it's recommended to drain the antifreeze and add the same brand from the beginning. Since different brands of antifreeze have vastly different chemical properties, mixing them can lead to corrosion among various functional additives. Different brands of antifreeze use different corrosion inhibitors, so they should not be mixed to avoid unnecessary trouble. Do not lubricate tire bolts and nuts: When bolts on a moving car rust, it's common to oil them to restore functionality. However, some people apply lubricant to the bolts and nuts to prevent rust, which can pose necessary risks to safe driving. At high speeds, bolts and nuts can easily loosen or even fall off, leading to driving malfunctions. Electronic fuel injection cars do not require stepping on the accelerator when starting: The starter of an electronic fuel injection car differs from that of a regular car. Its fuel injection control device can automatically adjust the fuel supply based on the starter's temperature and operating conditions, ensuring a smooth start.

11

2

Share

How to Reset the Tire Pressure Light on the New Excelle?

Press the "MENU" button on the turn signal lever to switch the small screen to the "Vehicle Information" column. Once selected, the dashboard will display "Tire Pressure Learning in Progress". Use a tool to press the valve core to deflate and calibrate all four tires. Start the vehicle and observe if the dashboard lights display normally. If no warning lights flash, the reset is complete.

16

3

Share

How to Install the Camshaft in a Sylphy

Before installing the camshaft, first install all the bearing caps and check if the camshaft holes are misaligned. The camshaft for cylinder 1 must be facing upwards and not pressing on the valves. Tighten the 2nd and 5th bearing caps alternately in a diagonal pattern with a torque of 20Nm, then install the 1st and 3rd bearing caps, and finally install the 4th bearing cap.

16

3

Share

How to Use the One-Touch Window Control with Civic Key?

Use the lock and unlock buttons on the key to perform one-touch window operations. Press and hold the lock button for about 3 seconds, and all four windows will automatically roll up. Hold the unlock button on the key for about 3 seconds, and all four windows will simultaneously roll down automatically. If you're inside the car, pressing the button to the second detent will fully open the window; briefly pulling the switch to the second detent will automatically close the window.

2

4

Share

How to Replace Coolant in a Polo?

Polo replacement coolant method is as follows: 1. First, unscrew the coolant filler cap, then lift the vehicle and remove the engine underbody panel. 2. Locate the radiator lower hose, use a tool to loosen the clamp at the hose connection, then slowly pull out the lower hose to drain the coolant. 3. After cleaning up the remaining coolant, you can replace it with new coolant. Notes: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with special attention to the five-way hose. Additionally, after draining the old coolant, it is necessary to flush the liquid channels with clean water.

4

Share

How to Repair Scratches on the Windshield?

Here are the methods to deal with scratches on the car: 1. Hairline scratches: For hairline scratches, polishing or applying a rubbing compound is usually sufficient to remove them. Simply wiping gently can make the scratches disappear. 2. Light scratches: For light scratches, just prepare a tube of toothpaste. Toothpaste is very effective for shallow scratches that haven't damaged the car's primer. Especially for marks left by another vehicle's paint during a scrape or adhesive residue from stickers, most can be completely wiped off. 3. Moderate to deep scratches: Moderate and deep scratches cannot be repaired by polishing. For small dents not exceeding 5mm, they can be leveled with filler putty before repainting.

20

4

Share

What is the firing order of a 6-cylinder diesel engine?

What to Bring for the First Maintenance of Changan CS55?

How to Reset the Tire Pressure Light on the New Excelle?

How to Install the Camshaft in a Sylphy

How to Use the One-Touch Window Control with Civic Key?

How to Replace Coolant in a Polo?

How to Repair Scratches on the Windshield?

How to Adjust the Dashboard Brightness of Cadillac XT4?

What to Do After Audi Pedestrian Protection is Triggered?

How to Connect Bluetooth in the New Buick Excelle?

How to Connect Besturn Carlife?