What is the fine for a car's brake light not working?

2 Answers
StWillow
07/24/25 12:43pm
A fine ranging from 20 to 200 yuan will be imposed. The specific amount depends on the enforcement standards of local traffic police. Below are the safety hazards of a car's brake light not working: 1. Increased risk: It unknowingly raises the risk of rear-end collisions. The purpose of brake lights is to warn the following vehicle: the car ahead has braked, please slow down. The probability of rear-end accidents due to non-functioning brake lights is very high. 2. Liability: If a rear-end collision occurs because the brake light is not working, the driver will bear some liability. If the brake light of the leading car does not illuminate when braking, leading to a rear-end collision, the leading car will be held primarily responsible, as determined by the police. 3. Vehicle inspection: A car with non-functioning brake lights will not pass the vehicle inspection.
Was this review help?
17
3
Share
VivienneMarie
08/11/25 6:48am
I've been driving for decades and seen many drivers fined for non-functioning brake lights. It's quite common - if caught by traffic police, the fine is usually 100 to 200 yuan, possibly with demerit points too. Safety is the big concern here - without brake lights, following vehicles can't see when you're braking, increasing rear-end collision risks. I once neglected to check and got fined 100 yuan plus a lecture from an officer after my brake light failed during a short trip. My advice: don't skip routine maintenance. Make it a weekly habit to check all lights - bulb replacements are cheap and quick, saving you bigger headaches. While the fine amount isn't huge, the hassle is real, and accident liabilities are far worse. Developing good maintenance habits is absolutely worth it.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

Should You Press the Clutch When Driving?

Whether you need to press the clutch when driving mainly depends on the type of vehicle. Automatic transmission vehicles do not require pressing the clutch, while manual transmission vehicles do. Functions of the clutch: Ensures smooth vehicle starting. Enables smooth gear shifting. Prevents overload of the transmission system. Reduces torsional vibration impact. Types of clutches: Electromagnetic clutch. Magnetic particle clutch. Friction clutch. Hydraulic clutch. Introduction to the clutch: The technique for controlling the clutch in a car is to use the left heel as a pivot point, place the ball of the foot on the clutch pedal, and press or lift using the ankle and knee; when lifting the clutch, the heel can move slightly backward to prevent the clutch pedal from getting stuck under the ball of the foot.
12
3
Share

Does Playing Music While Driving Damage the Car Battery?

Playing music while driving does not damage the car battery, so you can fully enjoy the charm of music. When playing music while driving: During the driving process, the kinetic energy of the car can be converted to a certain extent into electrical energy in the battery, continuously replenishing it. When the vehicle's battery is in good condition, normal use of functions such as lights, radio, and music players will not cause any adverse effects on the car battery. For example, a battery with a capacity of 35Ah can last for about 3 hours on standby. When using the battery while parked: Using the battery for an extended period while parked or idling may lead to battery depletion, preventing the vehicle from starting or igniting normally. Therefore, avoid prolonged use of the battery when the car is parked.
5
2
Share

What Causes Abnormal Noise in Seat Belt Adjusters?

Vehicle seat belt adjusters may produce abnormal noise due to friction contact, shock absorber adjustment, connection gaps, and other reasons. Friction contact noise: Due to their position, vehicle seat belt adjusters may generate abnormal noise when rubbing against other objects. Shock absorber adjustment too tight: Vehicle seat belt adjusters generally have shock absorption functions. If screws are not tightened properly during adjustment, abnormal noise may occur. Installation with pin connection gaps: When there are pin connection gaps in the seat belt adjuster, driving on uneven roads can cause shaking, resulting in impact noise from the pin collisions.
1
1
Share

How to Activate Cruise Control on the Honda Avancier?

Method to activate cruise control on the Honda Avancier: The cruise control activation button is located on the steering wheel. When driving above 40 mph, press the button on the upper/lower toggle switch with your right hand, then push the toggle switch downward. The center console will display the speed, and you can set the desired speed using the toggle switch. The cruise control can be canceled by pressing the brake or the button below the toggle switch. The dimensions of this vehicle are 4816 mm in length, 1942 mm in width, and 1669 mm in height, with a wheelbase of 2820 mm. The Avancier is equipped with an ANC active noise cancellation system, utilizing extensive sound-absorbing and sound-insulating materials. Through noise reduction designs applied to the engine, body, and even the wheels, it achieves a quietness performance comparable to luxury vehicles.
7
3
Share

What's the reason for the hood secondary lock not latching properly?

The reasons why the hood secondary lock won't latch properly: It could be that the release handle inside the cabin is stuck and hasn't returned to its original position. It might also be due to rust or debris stuck in the locking mechanism. If there was a front-end collision, it's possible that misaligned body panels are causing the latch and lock mechanism to not align properly. Hood: Made of rubber foam and aluminum foil materials, it reduces engine noise while simultaneously isolating heat generated during engine operation, effectively protecting the paint surface on the hood and preventing aging. Assisted driving visibility: During driving, the driver's front view and natural light reflection are crucial for correctly judging road conditions. The hood's shape can effectively adjust the direction and form of reflected light, thereby reducing the impact of light on the driver.
17
0
Share

What Causes Trunk Malfunction?

Reasons for trunk button malfunction: Linkage rod breakage: If you frequently use the key to open the trunk lid, it is likely that the linkage rod is broken, and you need to go to a repair shop to open the trunk. Key battery dead: If the remote key is not used to unlock, it will be difficult to open. Before attempting to open, it's best to press the unlock button on the key or check if the key battery is dead. Trunk itself: It may also be an issue with the trunk itself, such as a broken trunk wire or other trunk-related problems that prevent the car trunk from opening. If the trunk cannot be opened after washing the car in winter, it may be due to the trunk being frozen. If the trunk cannot be opened after washing the car in summer, it may be due to something obstructing the trunk.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.