What is the fault when the SVS light is on in the Domain Tiger 5?

1 Answers
JoelFitz
09/08/25 2:01am
When the SVS light is on in a Jiangling vehicle, it may indicate an issue with the engine or automatic transmission. Below are the specific reasons and solutions: Engine Fault: Fuel quality is the primary factor causing the engine fault light to illuminate. The anti-knock property of gasoline is represented by its octane rating—the higher the octane number, the better the anti-knock performance. Therefore, poor fuel quality is a major cause of insufficient engine combustion, leading to the engine fault light turning on. Solution: Pull over to the side of the road or drive to the nearest service area and stop. Observe the engine self-check light, check if the engine coolant temperature is too high, inspect whether the engine is low on oil, and monitor if the engine is running smoothly. Automatic Transmission Fault: Transmission slipping and lack of acceleration: During driving, if you hear the engine revving without an increase in vehicle speed and feel the car lacks power, this phenomenon is often caused by burnt clutch plates. Solution: In this case, it is necessary to hand the vehicle over to professionals for handling.
Was this review help?
10
5
Share
More Forum Discussions

What is the 0-100 km/h acceleration time for the Sylphy?

According to official data, the Sylphy is available in three engine variants: 1.2L, 1.6L, and 1.8L. The 1.2L model accelerates from 0-100 km/h in 8.63 seconds, the 1.6L model in 12.1 seconds, and the 1.8L model in 11.4 seconds. Official data shows that the 1.4T variant of the Yidong accelerates from 0-100 km/h in 9.2 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in simple terms, represents the strength of the force. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The maximum torque of the Verano is 250 Nm, with a 0-100 km/h acceleration time of 7.7 seconds. The Sylphy 1.6L has a torque of 174 Nm, with a 0-100 km/h acceleration time of 12.1 seconds. Transmission efficiency: The transmission, as the medium for power delivery, inevitably involves power loss. Higher transmission efficiency leads to better acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Sylphy 1.6L is equipped with a CVT transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). A higher power-to-weight ratio results in faster acceleration. The Verano has a power-to-weight ratio of 137 Hp/T, with a 0-100 km/h acceleration time of 7.7 seconds. The Sylphy 1.6L has a power-to-weight ratio of 109 Hp/T, with a 0-100 km/h acceleration time of 12.1 seconds.
16
5
Share

Why is the BMW X5 car key not responding?

Here are the specific reasons why the BMW X5 car key is not responding: Remote lock failure: It is very likely that the remote lock is malfunctioning or factors such as aging of the car's remote transmitter antenna are causing the remote key to not work. In this case, you can use the spare mechanical key to lock the car. Signal interference: There is strong magnetic signal interference around the car. Since the smart key uses low-intensity radio waves, it cannot function properly under magnetic interference. LED display screens, radio monitoring equipment, walkie-talkies, infrared anti-theft alarms, high-voltage lines or substations, etc., may all generate interference to the remote key, with an interference range of 30 meters to 100 meters.
5
4
Share

What is the fuel consumption per 100 kilometers for the Jetta Pioneer?

Jetta Pioneer generally consumes 8 to 9 liters of fuel per 100 kilometers. Lightly press the accelerator: When the car starts at low speed, it is the peak fuel consumption area. Therefore, lightly pressing the accelerator during startup to prevent excessively high RPM can effectively reduce fuel consumption. Avoid high RPM: Try to avoid unnecessary high RPM as fluctuating engine speeds can significantly increase fuel consumption. Regular maintenance: Change the engine oil and remove carbon deposits. Avoid emergency braking: Anticipating road conditions in advance not only improves driving safety but also saves fuel. For example, gradually slowing down before traffic lights and utilizing inertia to coast.
16
2
Share

How Long is the Original Factory Warranty for Audi?

Audi's original factory warranty covers 3 years or 100,000 kilometers. Different components have different warranty periods: Generally, different parts and components have varying warranty periods. For example, fast-wearing components like batteries, air filters, cabin air filters, and timing belts typically have shorter warranty periods. Wear-and-tear parts are not covered by the warranty: The Maintenance Manual usually specifies that wear-and-tear parts such as tires, brake pads, clutch plates, window glass, wiper blades, and headlights are not covered by the warranty. These components are considered functional at the time of vehicle delivery and are expected to wear out naturally over time. Subsequent issues are usually due to accidents or human damage.
1
2
Share

Where is the engine speed sensor located on the new Passat?

The engine speed sensor on the new Passat is located at the connection point between the engine flywheel and the transmission. Function of the speed sensor: The engine speed sensor detects the engine speed, determines the position of the crankshaft, and detects signals for the top dead center of the piston and the crankshaft angle. These detected signals are then transmitted to the ECU to control ignition timing and fuel injection timing. Working principle: The engine speed sensor and the camshaft position sensor have similar structures and working principles. They work in coordination to ensure the engine operates properly. They are usually installed together, typically within the distributor, on the clutch housing of the transmission, or at the front or rear end of the crankshaft. A pulse signal-type speed sensor is used to measure the engine speed.
1
0
Share

What is the wiper size for the Venucia D50?

The wiper size for the Venucia D50 is 18 inches. Common sizes: Common wiper sizes correspond to rubber blade lengths: 14 inches is 350mm, 15 inches is 375mm, 16 inches is 400mm, 17 inches is 425mm, 18 inches is 450mm, 19 inches is 475mm, 20 inches is 500mm, 21 inches is 525mm, 22 inches is 550mm, 24 inches is 600mm, 26 inches is 650mm. Precautions: Wipers are rubber products and should ideally be replaced annually. If the wiper's water-clearing ability declines, it will be difficult to observe road conditions during rainy weather. Before daily use, clean the windshield to prevent sand particles on the glass from damaging the wiper blades and reducing their lifespan.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.