What is the fault light of Mercedes-Benz gla200?
1 Answers
Mercedes-Benz gla200 fault light information is as follows: 1. Mercedes-Benz GLA water temperature gauge warning light: The water temperature gauge is mostly pointer-type in vehicles. Its pointer usually points within the red area under normal temperature conditions, with a temperature value around 95 degrees Celsius, and some vehicles may have higher values. The water temperature gauge indicates the current temperature of the vehicle, showing whether the engine is operating within the normal temperature range and if there are any abnormal conditions such as overheating. 2. Mercedes-Benz GLA engine fault light: If this warning light illuminates or the pressure gauge indicates too high, the engine must be turned off immediately. First, check if the engine oil is low by turning off the vehicle and pulling out the engine oil dipstick to see if the oil level is between the minimum and maximum marks. If the oil level is normal, a technician should be consulted to determine the cause of the light. 3. Mercedes-Benz GLA ABS warning light: If the ABS light comes on while driving, it indicates an abnormality in the ABS electronic control system; in this case, the normal braking system usually remains functional, but the ABS may not work. 4. Mercedes-Benz GLA brake warning light: If the brake warning light comes on when the handbrake is released during normal driving, it is necessary to promptly check the brake fluid level to see if there is a shortage. If the brake fluid is significantly low, check for possible leaks immediately. Since brake fluid does not deplete rapidly, a leak could lead to brake failure, so extreme caution is required. After checking, if there is no shortage, the vehicle should be taken to a service station to inspect the brake fluid level sensor or the handbrake light switch for any faults.
