What is the fault code E15CA428 for Komatsu?

What kind of engine oil is best for the new Jetta?

The new Jetta uses SG5W40 engine oil. Engine oil, also known as engine lubricant, serves multiple functions including lubrication and wear reduction, auxiliary cooling, sealing to prevent leaks, rust and corrosion prevention, and shock absorption. Engine oil consists of two main components: base oil and additives. The base oil is the primary component of the lubricant, while additives are used to compensate for and improve the performance deficiencies of the base oil, making them an essential part of the lubricant. The dimensions of the new Jetta are 4487mm in length, 1706mm in width, and 1470mm in height, with a wheelbase of 2603mm. The vehicle is powered by 1.4L and 1.6L engines, delivering maximum power outputs of 90 horsepower and 110 horsepower respectively. The transmission options include a 5-speed manual or a 6-speed automatic transmission.

3

1

Share

What items are included in the annual vehicle inspection?

Vehicle annual inspection items include: checking whether the engine, chassis, body and its auxiliary equipment are clean, complete and effective; whether the paint surface is uniform and aesthetically pleasing; whether major assemblies have been replaced and whether they match the initial inspection records; verifying whether the vehicle's braking performance, steering control, lighting, exhaust and other safety performance meet requirements. Before the annual inspection, vehicle owners need to prepare in advance and gather necessary materials, including the vehicle license, valid third-party liability insurance policy for the motor vehicle, ID card, etc. It is also necessary to check whether there are any outstanding traffic violation records for the vehicle. If there are any violations, they must be dealt with at the nearest traffic police station. Failure to conduct the inspection in time after the annual inspection expires may result in penalties from traffic police during road enforcement.

20

5

Share

What is the emission standard of the Chery E5?

The Chery E5 complies with the China IV emission standard and is equipped with an OBD system. The China IV emission standard is the fourth phase of the national standard for motor vehicle pollutant emissions. The main pollutants emitted by vehicles include HC, NOx, CO, PM, etc. Through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, the standard controls and reduces vehicle emissions to below specified limits. The dimensions of the Chery E5 are 4580mm in length, 1760mm in width, and 1483mm in height, with a wheelbase of 2600mm. In terms of safety, the vehicle is equipped with a full-metal enclosed load-bearing monocoque body, high-energy absorption front and rear anti-collision beams, side door anti-collision bars, a collision safety structure platform, and emergency locking three-point seatbelts.

10

4

Share

How to Perform a Hill Start Without Rolling Back?

Methods to prevent rolling back during a hill start: 1. Place the gear lever in neutral, firmly engage the handbrake to ensure no rolling; 2. Depress the clutch pedal fully with your left foot, shift into first gear, hold the steering wheel at the 9 o'clock position with your left hand, and grip the handbrake with your right hand; 3. Gradually release the clutch with your left foot to the half-engagement point, when the vehicle begins to vibrate and shows a forward tendency, start gently pressing the accelerator pedal with your right foot while pressing the handbrake release button with your right hand; 4. Only when the vehicle moves forward should you fully release the handbrake with your right hand; 5. Continue releasing the clutch with your left foot until it's fully disengaged, and keep pressing the accelerator with your right foot to climb the slope. During the start, avoid prolonged acceleration in the half-engagement state. Once the vehicle is propelled by the accelerator, it won't roll back, then you can release the clutch pedal and press the accelerator to start.

16

1

Share

Can the rear seats of the CRV be laid flat?

The rear seats of the CRV can be laid flat. There is a handle on the seat part of the rear seats; pulling it will allow the seats to be laid flat. Pulling both handles simultaneously will lay all the rear seats flat. After folding down the rear seats, the trunk gains more space, making it easier to load longer and larger items such as mattresses, golf bags, etc. Introduction to car seats: Car seats refer to the seats used when riding in a car. They can be roughly divided by location into: front seats: headrest, backrest, seat cushion, (armrest), rear seats: (headrest), backrest, seat cushion, side wings, (armrest). Types of seats: Car seats can be classified by shape into separate seats and bench seats; by function into fixed, removable, and adjustable seats; and by passenger capacity into single, double, and multi-person seats.

19

5

Share

Why Does a Fuel-Injected Motorcycle Stall?

Frequent stalling of a fuel-injected motorcycle may be due to faults in the electrical components of the fuel injection system or loose or poor connections in the wiring. This is especially likely when riding on bumpy roads, where loose wiring connections are more probable. It is recommended to visit an after-sales service to retrieve the fault codes to identify the specific issue and check whether the wiring connectors of each electrical component are loose. Introduction to Fuel-Injected Motorcycles: A fuel-injected motorcycle is a new type of motorcycle that uses a microcomputer to control the fuel injector, supplying fuel to the cylinders that need to work while cutting off fuel to those that do not, based on the engine's load. Advantages of Fuel-Injected Motorcycles: Compared to traditional carburetor motorcycles, fuel-injected motorcycles are more fuel-efficient, saving over 20% more fuel than their carburetor counterparts. With digital ignition and fuel injection, fuel consumption is reduced, and emissions are improved, making them more environmentally friendly than carburetor motorcycles. They directly meet the Euro 11 emission standards and also feature easy starting, instant ignition, and stable idling.

8

1

Share

What is the fault code E15CA428 for Komatsu?

What kind of engine oil is best for the new Jetta?

What items are included in the annual vehicle inspection?

What is the emission standard of the Chery E5?

How to Perform a Hill Start Without Rolling Back?

Can the rear seats of the CRV be laid flat?

Why Does a Fuel-Injected Motorcycle Stall?

How to deactivate the anti-theft system of Besturn B50?

What is the vehicle green book certificate?

How to Turn Off the Radio in a Buick Excelle?

Where is the trunk switch located inside the Lavida Plus?